What material is the wallet generally made of, what material is the wallet made of, and how to choos

Updated on technology 2024-07-20
11 answers
  1. Anonymous users2024-02-13

    1. Materials: paper, face cloth, lining, and adhesive lining (adhesive lining should be harder) and linen, iron, zipper, needle, ruler, button.

    2. Steps: 1. First, cut out the paper pattern according to the size below.

    2. Then according to the paper pattern, cut out 4 pieces of cloth, which are the face cloth, the lining cloth, and the adhesive lining (the adhesive lining should be harder) and linen.

    3. Heat the adhesive lining of the fabric wallet with an iron to stick it to the face cloth.

    4. Then cut a piece of lining that is narrower than the paper pattern, sew the zipper on it, and add the width of the zipper, which is as big as the paper pattern. Zipper front stitching.

    5. The sewing method on the reverse side of the wallet zipper.

    6. Then put these pieces in the following order, stretch them with threads, and then compare and trim them with paper patterns.

    Centimeter width 75 cm lining cloth, used to fold the card slot.

    8. There are three card slots on the left and right, which should be exactly the same width as the wallet after folding.

    9. After folding, the back is lined with a piece of the same large lining cloth and stretched with thread.

    10. Use a piece of cloth and make a 3 cm wide oblique strip at a 45-degree angle.

    11. Then according to the following method, wrap the cloth of the folded card position.

    12. Then compare the side of the stretched noodles with the side of the card position and stretch it well.

    13. Use the following method to sew the buckle strip.

    14. This is what it looks like when it is sewn.

    15. Fix the buckle in the corresponding position, and then roll the edge, do you understand? The focus is on the joints of the four corners and piping.

    16. Looking at the effect inside the wallet, a beautiful handmade fabric wallet is basically formed.

    17. The inside of the sewn picture.

  2. Anonymous users2024-02-12

    Wallets are generally made of leather.

    Wallets can be basically divided into medium and long wallets and short wallets according to their styles; The mid-length wallet is known for its rectangular shape and longer length. If you have a lot of stuff and put your wallet in your bag, it is advisable to choose a mid-length bag. Compared with the short wallet bag, the mid-length wallet is also more generous.

    Short wallets are short in length and width, generally close to square, and are recommended if you often pack money in your pockets.

  3. Anonymous users2024-02-11

    Be sure not to wash it, mine is bought in the United States and is actually a paper shell.

  4. Anonymous users2024-02-10

    Cowhide, lambskin, PU, and lychee skin.

  5. Anonymous users2024-02-09

    Skin, ah......Mostly leather ......Artificial leather or animal skin ......

  6. Anonymous users2024-02-08

    Mine is a pearl fish skin and it looks good.

  7. Anonymous users2024-02-07

    You can make a beautiful wallet with simple materials, so try it if you like it.

  8. Anonymous users2024-02-06

    1. The wallet is made of leather. When choosing a wallet, the most important thing is to choose a wallet that suits your identity and reflects your personality.

    2. How to choose a wallet: recognize the leather logo signage. Check whether the goods have trademarks, factory names, factory addresses, and certificates. Imported leather products should have Chinese labels.

    3. The metal parts of the wallet, such as the pull ring, clasp, key hook, etc., must be seen whether the gold-plated part is intact. The seams of the wallet should be tightened, but if it is too tight, the entire leather surface will be pulled too tightly, resulting in the cracking of the wallet. Pay attention to whether there are too many seams on the leather surface, if there are too many gaps, it means that multiple different leather pieces are used, so a good wallet should avoid too many seams.

  9. Anonymous users2024-02-05

    Here's how the wallet does it:Step 1: Make an origami wallet with square pieces of paper.

    Step 2: Fold the paper in half on the sides and open it, fold the two sides again to the middle crease and open it.

    Step 3: Fold the other pair of sides in half, then fold the two corners, noting where the folds are.

    Step 4: Once opened, fold inwards according to the creases.

    Step 5: When you're done folding, all of them, then fold the top and bottom sides to the middle and then open them.

    Step 6: Let's start making the wallet according to the creases.

    Step 7: Fold the parts on both sides towards the middle position.

    Step 8: Fold the top part down after that.

    Step 9: After folding, it will look like this.

    Step 10: Close the sides together and you're done with this origami wallet.

    For children, origami can exercise the dexterity of children's fingers, develop their hands-on ability and innovation ability; Origami must be done step by step, and in this process, children can also develop a good habit of doing things carefully and in a step-by-step and orderly manner, and can also cultivate their observation and attention; Because of its strong plasticity, origami can develop children's creativity, imagination and visual thinking skills; Objects in daily life, small animals, vehicles, etc. become figurative origami, and in the process, children's spatial imagination ability will also be improved.

  10. Anonymous users2024-02-04

    Here's how:Tool materials: paper, glue.

    1. First of all, the two short sides are folded to the middle line, as shown below.

    2. The quarter line on the right side coincides with the diagonal (gray line), and the two corners at the position of mark 1 are folded to the back.

    3. Fold both sides to the back;

    This is the back of the previous step, folded left and right in half, at this time it can also be glued together.

    4. The two mezzanine wallets are ready.

    It is possible to increase the number of interlayers, glue them together.

    5. Stuff a piece of paper with the same width as a wallet in the mezzanine.

    6. The two corners on the right side are folded inward, and the finished product is as follows.

  11. Anonymous users2024-02-03

    1.Take a piece of paper and fold it in thirds.

    2.Open and fold the corners of both sides in half toward the middle.

    3.The two corners of each end continue to fold in half towards the middle.

    4.Once folded, align the sides toward the midline.

    5.Turn over and continue aligning towards the middle. Fold it in half.

    6.Pull the triangle out from the inside of the wallet.

    7.The corners are folded inwards and the triangles are pressed downward.

    Such a good-looking wallet is folded.

Related questions
8 answers2024-07-20

Ordinary permeable brick: The porous concrete material made of ordinary gravel is pressed into shape, which is used for sidewalks and squares in general blocks, and is a product of general paving. >>>More

4 answers2024-07-20

First of all; It's up to you to see if you like it or not. >>>More

18 answers2024-07-20

1. Look at the profile quality of plastic steel doors and windows. >>>More

14 answers2024-07-20

There are many methods of mold classification, which are often used in the past: classification according to the structural form of the mold, such as single-process mold, duplex die, etc.; Classified according to the use object, such as automobile panel mold, motor mold, etc.; Classified according to the nature of processed materials, such as molds for metal products, molds for non-metallic products, etc.; Classified according to mold manufacturing materials, such as cemented carbide molds, etc.; Classified according to the nature of the process, such as drawing die, powder metallurgy die, forging die, etc. Some of these classification methods cannot fully reflect the structure of various molds and the characteristics of the forming process, as well as their use functions. >>>More

10 answers2024-07-20

The scope of your problem is too wide, so let me tell you, decoration materials are roughly divided into main materials and auxiliary materials, the details are as follows, I hope to help you! >>>More