How to clean a small handheld fan? How do you clean a small fan?

Cleaning method with a small hand-held fan:

1. Before preparing to disassemble and wash, you must first find several tools, the most important thing is a screwdriver of the right size.

This is used to open the shell of the small fan, and then there is a wet rag and a small basin of clean water, no need to prepare detergent, the stains on the fan blades are not so firm, and the water is enough to scrub clean.

2. If the small fan is not easy to dismantle, you can use a cotton swab to operate and scrub, first scrub the gaps on the outer wall, spread a wet paper towel on it, and then poke it in one by one with a cotton swab to wipe, both sides can be used in this way.

3. To scrub the fan blades, you can fix the fan blades with a cotton swab stuck in the gap to avoid the fan blades running, and then poke it in with a cotton swab to wipe it.

Cleaning method 2:

1. Cleaning the hand-held mini electric fan.

Be sure to cut off the power supply or remove the battery to prevent electric shock during cleaning. The purpose of this is to prevent the fan blades from turning and injuring the fingers.

2. Before cleaning the fan, remove the protective net of the fan, and when disassembling the protective net, pay attention to rotating the buckle clockwise. After removing the protective net, use a screwdriver to loosen the screws that hold the fan blades and remove the fan blades.

3. Put the protective net of the fan directly into the basin filled with water, wash it with a toothbrush, and then wipe the fan blades clean with a damp cloth. If there is a lot of dirt on the fan blades, you can use dish soap.

or laundry detergent to clean.

4. After cleaning, remember to reinstall the protective net and test whether the electric fan can be used normally.

1. The focus of our washing is the grille and fan blade, first use a Phillips screwdriver to unscrew off the screw that fixes the grille, then remove the front grille, and then unscrew the fixing nut on the fan blade, you can take the fan blade down, and finally unscrew the fixing nut on the rear grille, and the rear grille can also be taken down.

2. After taking these three things down, put them in a large sink, first put water to wash down the surface of the net cover and fan blades, then sprinkle some washing powder, and wait for 5 minutes to let the washing powder dissolve the stains on the lower surface.

3. At this time, it is time for the brush to appear, that is, to use the brush to brush the net cover and fan blades inside and out, brush more places with more stains, and then rinse with water to clean it, and then use a rag to dry the water, so that it is OK. Then the rest of the fan is damp with a rag and wrung out to wipe it again, and it's OK.

4. Reinstall the fan in good condition, and then cover the fan with a cloth to prevent dust. Put him away in the storage room again.

How to clean a small fan:1. Turn off the small electric fan.

2. Prepare your tools.

3. Use a screwdriver to put the screws on the fan cover.

Take it all apart and remove the front cover.

4. Remove the screws on the fan blades.

5. Keep the screws and don't lose them.

6. Take a clean towel and wipe the dust off the fan blades, only need to wipe the dust clean.

7. Put the wiped fan blades back and tighten the screws, be careful not to let the fan blades cut your hands.

8. Wipe the outer cover of the fan, and then install the outer cover back, and the screws must be tightened, otherwise there will be potential safety hazards when you use it.

Target. <>

If you want to wash a small fan, generally the small fan can be disassembled, you can disassemble the small fan, take down his small fan and wash it, and lay the foundation without getting wet.

The small fan can't be disassembled, how to clean.

When the small fan is cleaned without dismantling, you can first pour some baking soda, dish soap and vinegar into a container, and finally add water to dilute and stir, pour it into the small watering can, spray the watering can on both sides of the fan blade to moisten, and then start the small fan to rotate, so that the dirt on it can be removed.

A cleaning method that cannot be removed with a small fan.

When cleaning the small fan, if you don't disassemble it, you can prepare a clean container, put some baking soda powder in it, then pour in some vinegar and a small amount of dish soap, and finally add water and stir well, but to ensure that it is the best dilution state.

Then pour the stirred dilution into the small watering can as a backup, plug in the small fan to start, as long as the watering can is sprayed on both sides of the fan blades, and then the dirt is removed according to the rotation of the fan blades, so that the purpose of cleaning can can be achieved.

Finally, spray the fan blade with water several times to achieve the purpose of cleaning, and then wipe the fan blade clean with a dry rag, mainly because baking soda has a strong decontamination effect, while vinegar can soften the dirt, and dish soap has a surface activator, which has a strong removal effect on stubborn dirt.

You don't need to disassemble the cleaning fan, teach you cleaning skills, and the dirt can be wiped off lightly, saving time and effort.

The weather is going to heat up slowly, and you can take out a small fan or something, clean it and set it aside. The fan is easy to get dusty when it is used, and if it is put for a period of time, it will inevitably fall into dust, and if you use it directly at this time, the absorbed dust will be blown out, which is very harmful to health. So how do you clean a small fan?

1.Prepare a screwdriver of the right size, a damp cloth and a basin of clean water. The screws of the housing are usually fixed in the middle of the sides, and some are slightly obscured for the sake of good looks, but are also easy to find. Loosen, remove, and place the set screws, then remove the housing.

2.Scrub the fan blades with clean water. Simply secure the fan blades with one hand and scrub with one hand without too much force.

Sometimes the fan blades are not very strong and can wobble a little, especially the kind that has been used for many years. The plastic itself is brittle, so be careful.

3.After scrubbing, use a dry cloth or toilet paper to wipe off the droplets. Of course, you can dry it naturally and then proceed to tighten the removed screws.

First prepare a scouring pad, and then use a knife to cut a few picks on the scouring pad horizontally and vertically, the distance is based on the distance between the lines in the fan grille, pay attention to be neat, otherwise the effect will be affected after cleaning. After cutting, prepare a basin of water, add some detergent and white vinegar to the basin, stir evenly with a scouring pad, and then put the scouring pad into the basin of water and soak for about 2 minutes. To clean, squeeze a portion of the scouring pad's water and place it on a grille.

Align the cutting gap of the scouring pad with the line of the grille, then gently press in and wipe it, and the dust on the grille will be removed. You can wipe it a few more times, change the water a few times and it will be clean.

This is mainly due to the flow of air in the front and rear of the fan blades, which absorb both moisture and dust in the air, which condense together when they come into contact, and dust particles that adhere to the surface of the damp fan blades. You can use a screwdriver to remove the screws on the hood, remove the outer half of the hood, and loosen the large screws that hold the fan blades in place to remove the fan blades. You can use a blower to blow away dust, or clean it with a damp cloth and white vinegar, etc.