Toilet Shifter Installation Okay, how to install a toilet shifter

Yes, one of the drawbacks of using a shifter is that it is easy to cause clogging by having a corner. But don't worry too much, you can't install it directly and you can only use a shifter, otherwise the loss of re-opening and reinstalling the pipe is too great.

The toilet shifter is raised above the ground. Normal because the ground has been tiled. The shifter itself has a height.

That must be on the ground. The toilet bowl cannot be installed, so it must be installed. The ground must be raised.

Or open a hole in the floor tiles. Put the shifter down. to install.

Bellamy's shifts are the best ones on the market right now. Good workmanship inside. Ultra-thin type, less digging depth, easy to install, not easy to block. You can check it out.

If you want to shift, you can use a shifter, and then install a hidden water tank and a wall-hung toilet, so that the toilet drain is relatively high, and there is no problem with drainage.

The moving distance of the shifter is generally 10 cm, and the thickness does not need to be calculated, because the toilet cannot be raised, and it cannot be installed if it is raised, so you can only dig a hole in the floor, dig it according to the height and size of the shifter, and dig it until it can be installed.

Toilet displacement method.

It is a troublesome thing to move the toilet in the bathroom, and in addition to using the powerstone toilet shifter, there are two ways to raise the floor and re-open the hole. Raising the floor to move the toilet requires the ground to direct the pipe to where your toilet needs to be moved, so that the ground must be raised so that the pipe can be buried; Re-opening the hole to move the toilet is to change the front toilet to the rear toilet, which can easily conceal the pipe.

Requirements for using toilet shifter shifts.

The greater the distance the toilet shifter is generally displaced, the greater the slope. Therefore, the installation of the shifter should be before the floor tiles, some should be planed down the ground or raised the ground, and some of the lifts should not have many floor pads, and the place where the horizontal drainage can be carried out is relatively narrow (the general channel is flat). However, if it is only moved by 5 cm, it does not matter much, and the ground drain is 10 cm, which is equivalent to staggering half of the mouth.

Toilet shifter installation: 1. Make a simple measurement of the position where the toilet needs to install the shifter, and leave the corresponding distance. 2. Raise the ground by 20 cm and connect the sewage pipe to the original cavity.

3. Leave the path where the shifter needs to be installed, then put the shifter in to bury it, and then put the toilet on it.

Toilet shifter: some are called offset, sewage shifter, the main toilet cavity is used when installing, because the toilet wall and the sewage outlet position is fixed, the selected toilet sewage outlet and the lower sewage nozzle position does not correspond, resulting in the pipe fittings used in the case of not being able to complete the docking.

When the toilet is displaced, the distance of displacement is very important, and generally the safety distance should not exceed 10 centimeters. Because ten centimeters is the best positioning as a safe distance, no more than ten centimeters is the best distance choice.

After using the toilet shifter, the toilet will be more likely to be clogged than before, and the sewage pipe will have more curves than before, the air pressure in the pipe will increase, it is easy to lead to the return of sewage, and the flushing function of the toilet can not be fully played, so unless necessary, it is best not to install the toilet shifter, if you have to install the toilet shifter, it is best not to connect it too long.

Toilet shifters can be used better, so many families will install toilet shifters when preparing sedan cars to decorate bathrooms to better drain sewage. But how to install the toilet shifter well? This requires a master of the professional limb rolling rock industry to better help you install, once the installation is not good, it will affect the service life of the toilet, so you must install it.

1. What is a toilet shifter?

The toilet shifter is a kind of pipe fitting, which is fixed in the place of the toilet wall and the sewage outlet, and the selected toilet sewage outlet and the lower sewage outlet do not correspond to the position of the lower sewage nozzle, resulting in the situation that the docking can not be completed, so that the toilet sewage outlet and the lower sewage outlet can complete the docking.

Second, the function of the toilet shifter.

The toilet shifter is an installation (pipe fitting) that can change the position of the air drain when the air drain and the toilet drain are not suitable. The toilet shifter can not only change the front and back of the air and outlet outlets, but also the left and right places of the water vent. For example, the wall distance of the toilet is 25 cm, if you can't find the toilet with such a small wall distance, you can use the shifter to move forward 5 cm, and there are also toilets next to the sewer main, such as the column package is big, the toilet is too crowded or can not be fitted, but also use the shifter to adjust the left and right places.

3. Requirements for installing toilet shifts.

1. The toilet shifter can be moved by 10 cm. The size of the toilet shifter is usually 10cm 20cm;

2. The installation of the shifter has a slope requirement for the calendar, and the larger the interval of the ordinary shift, the greater the slope. Therefore, the device shifter should be in front of the floor tiles, some should be planed down into the air or pad the ground, and some shifters should not be padded in the air, but the place where the horizontal drainage can be carried out is relatively narrow (the ordinary passage is flat).

Fourth, the installation method of toilet shifter.

There are many kinds of toilet shifters, small distance shifts, there are 5 cm, 10 cm, 15 cm toilet shifters, it is recommended not to exceed 10 cm, such as the above belongs to the retractable type.

1. First measure the distance that needs to be moved, and use a saw to cut the main part of the shifter to just the right distance, and then use glue to connect the main body with the turning component, and the other side is the same, connect with the elbow.

2. Then dig out the path that needs to be shifted in the ground, and the width is slightly larger than that of the shifter.

3. Then bury the shift, and then you can install the flush toilet.

The correct installation method for the toilet shifter is as follows:

1. Small distance shift: you can use the shifter, the general specifications are 5 cm, 10 cm, 15 cm, it is recommended not to exceed 10 cm of the shift, otherwise it will affect the effect of punching and draining.

2. Long-distance displacement: the floor elevation is generally about 20 cm, and the pipeline and pipeline should have a certain slope, but the distance should not be too long; If the distance is long, the slope of the pipeline should be increased, and the elevation of the pure ground should also be increased.

Toilet

A toilet, also called a toilet, is a bucket with a lid for urinating and urinating. The invention of the toilet is known as a great invention, which solved the problem of people eating and drinking in and out of Lazar. Later, it gradually evolved into a flush toilet using the principles of siphon, spiral siphon, and now the latest jet siphon and super-siphon type.

There are also people who believe that the flush toilet is the root of all evil because it consumes a lot of domestic water. There are many classifications of toilets, including split and conjoined. With the development of science and technology, many novel varieties have also appeared.

According to the matching method of the toilet seat, it can also be divided into ordinary toilet and smart toilet.

Smart toilets can also be further divided into automatic set change smart toilets and non-automatic set change toilets, the former includes automatic set change plus flushing, automatic change set with flushing and drying and other different types. The history of the toilet can be traced back to the Han Dynasty, when the toilet was called Huzi, which was dedicated to the emperor, and the legend is that it was a grand game made of jade. It was held by eunuchs who served the emperor at any time.

Later, in the Tang Dynasty, because there was a person named Li Hu in the emperor's family, in order to avoid secrecy, he changed the name of Huzi to Beast or Mazi. After that, it evolved into the name of the toilet bowl in the process of making it absolutely or in circulation.

The toilet shifter, also known as the sewage shifter, is mainly used in the installation of a toilet to a pipe fitting. It is mainly used as a pipe fitting to change the position of the toilet when the ground drain and the toilet drain are not suitable. So how do you install a toilet shift? Can it be loaded?

Can the toilet shifter be installed?

Toilet shifters are generally used and installed in the case of too long or too short pit distance, because the size of the common toilet limb transfer hall code is with standard size, it is necessary to measure how far the pit distance is from the actual gap in advance, and then choose to buy a toilet toilet, and the toilet toilet must be installed by a bathroom installation professional, otherwise once the installation is improper, it will lead to the upper and lower interfaces and the center can not be connected, and the toilet shifter will be buried for the future. The slightest obstacle can cause clogged toilets and sewer pipes.

When using a toilet shifter, you need to chisel out the grooves and destroy the surrounding tiles, so you may have to worry about not being able to find tiles of the same color. After using a toilet shifter, the toilet is easily clogged, because after installing the toilet shifter, there are more curves, the air pressure increases, and it is easy to cause backflow, and the bathroom is filled with a foul smell for a long time. How to install a toilet shifter.

1.The shifter can theoretically move 5-10 cm, the shorter the distance, the better, the floor pad higher, in order to increase the slope, and can appropriately increase the size of the original pothole.

The renovation team does not recommend using toilet shifters. If you must move, it is safer to raise the floor. There is no problem with moving 5 cm with a shifter, but if you move it farther, there will be a big problem.

2.No matter how good the toilet flush is, no matter how good the shifter is, it will have a certain impact. For example, the pit spacing at home is 350mm, and the 400 pit spacing of the Mavoli bucket can definitely not be installed, and only 300 pit spacing can be used, but after installation, there will be a gap of 4-5cm between the toilet and the wall, which is not very beautiful.

Some people suggest putting a shelf in the back where you can put magazines and stuff like that, which is also a good idea.

3.The time to install the lifter is to install the lifter before laying the floor, so that it can be more beautiful.

The above is how to install the toilet shifter I shared, whether the toilet shifter can be installed, and whether you have an understanding of the installation of the toilet shifter after reading it?

1. The distance of the toilet shifter is usually 5-15 cm.

2. It is relatively easy to shift the bottom layer, and the floor can be directly chiseled, connected from the original toilet drain, and discharged into the pit pipe of the same diameter to the designated position, with few sequelae and no impact on the appearance.

3. Floor displacement, because of the consideration of the pipe diameter of the pit pipe, so it is necessary to raise the floor, one is the overall elevation, that is, the overall elevation of the toilet position and the pit pipe part. The other is that the pit pipe goes along the wall root from the back of the toilet and is discharged to the designated position, and the drain of the pit pipe is higher than the floor, which is matched with the corresponding toilet, and the pit pipe can be wrapped with open pipe or tiles.

4. No matter how good the toilet flush is, the use of a shifter will have a certain impact. For example, the pit spacing at home is 350mm, and the toilet with a pit spacing of 400 pit spacing must not be installed, and only 300 pit spacing can be used, but after installing it with Kaizhao, there will be a gap of 4-5cm between the toilet and the wall, which is not very beautiful. Some people suggest putting a shelf behind the rent, which can put some magazines and other things, which is also a good idea.

5. The time to install the shifter is to install the shifter before laying the floor, and then lay the floor, so that it can be more beautiful.