If you want to change the position of the toilet, what is the best way to do it besides the shifter?

If we want to change the position of the toilet in our daily life, we can change the layout of the toilet drain, or we can raise the position of our toilet floor in our daily life, so that our toilet can be moved at any time.

If you want to change the position of the toilet, in addition to the shifter, you can remove the toilet and reinstall it, which is more reliable and can effectively prevent the toilet from leaking.

Cut the main riser of the sewer, install the tee, the sewer pipe walks against the wall, on the left or right side, the sewer pipe is set with a slope of 3%, the main riser is low, and the toilet interface is high. Then install the bracket of the wall-hung toilet and place the cistern. Take a water supply pipe over, make sound insulation cotton for water supply and drainage pipes, and then use red brick masonry to build the sewer riser, toilet pipe, water tank, wrap and level, cement mortar plastering, and then decorate with bricks.

Bathroom we are not very unfamiliar with, we pay attention to its practicality when we decorate, and the toilet is also one of the most critical points of the bathroom, so have you heard of the toilet shifter? A lot of people don't know! Because we don't know about it, what do we need to pay attention to when choosing?

What is it and precautions for installation!

What is a toilet shift:

The toilet shifters on the market, also called offsets, are available in a variety of lengths, ranging from 2 cm to 3 meters, and are movable, mainly used for pipe devices that are convenient for docking when the position of the toilet outlet and the lower sewage outlet do not correspond.

When the position of the floor drain and the toilet drain is not suitable when decorating the bathroom, the position of the floor drain can be changed by using the toilet shifter. Assuming that the wall distance of the toilet is 25 cm, and such a small toilet can not be found on the market, at this time, you can use 5 cm forward to expand the distance, and there is a sewer pipe column next to the toilet, the column is too big, the toilet can not fit, and you also need to use the shifter to adjust.

How to install the toilet.

The shifter of the toilet is a device that can change the position of the ground drain when the ground drain and the toilet drain are not suitable. The method of shifting and installing the toilet shifter can not only change the position of the front and back of the ground drain, but also change the position of the left and right of the water outlet. For example, the wall distance of a toilet is 25 cm, if you can't find a toilet with such a small wall distance, you can use the shifter to move it forward by 5 cm, and some toilets are next to the sewer main, like the pillar is too big, the toilet is too crowded or can't fit, and the position of the shift is also adjusted.

How to install the toilet shifter.

Knowing the knowledge about the toilet shifter, although it is best not to install the toilet shifter, but in the daily life and cleaning work, the answer Kuankai, because the decoration has been determined, the toilet needs to be moved is a thing that has to be done, then, it is necessary to understand the specific situation of the toilet shifter installation, so as to ensure that it does not affect the decoration of the bathroom and does not affect the daily use of the toilet.

In the current building materials market, usually the size of the toilet shifter is with a standard size, if the installation is improper, resulting in the upper and lower interfaces and the center can not be connected, it may be buried for the future, resulting in a small obstacle to the toilet and the sewage pipe blockage. Therefore, the toilet shifter is generally installed when the pit distance is too long or too short, and the distance of the displacement can not exceed 10mm, and the toilet shifter can only be installed after the floor tiles are pasted.

When we decorate, we can't do without the bathroom, and the equipment of the bathroom is also very important. The above is what the toilet shifter is and the installation precautions introduced to you today, and this is the end of it.

The bathroom is inseparable from our bathroom furniture, especially our toilet, it is our best helper, we want to buy the best toilet, we want to buy the best toilet, we have to buy from its purchase, etc., such as the quality of the purchase, and its brand, etc., what isToilet shifter?Is a toilet shifter good? Let's take a look at it.

First, what is a toilet shifter.

1. Overview of toilet shifter Toilet shifter is a kind of pipe fitting, which is used in the case that the position of the toilet wall and the sewage outlet is fixed, and the position of the selected toilet sewage outlet and the lower sewage outlet does not correspond, resulting in the inability to complete the docking, so that the toilet sewage outlet and the lower sewage outlet can complete the docking. In fact, it is a kind of pipe fitting, if the bathroom wall and the sewage pipe mouth have been fixed, and the toilet sewage outlet and the toilet sewage pipe mouth can not be docked, this kind of pipe fitting will be used, only the use of this pipe fitting can make the two docked.

2. After the toilet shifter, it is easy to cause toilet blockage, and after installing the toilet shifter, due to the more curves, the air pressure becomes larger, which is easy to cause backflow, and the impact on the toilet flushing effect is also very large. Therefore, it is not recommended to use a toilet shifter when it is not needed, and even if it is used, it is recommended not to go too far. The greater the distance the toilet shifter is generally displaced, the greater the slope.

Therefore, the installation of the shifter should be before the floor tiles, some should be planed down the ground or raised the ground, and some of the lifts should not have many floor pads, and the place where the horizontal drainage can be carried out is relatively narrow (the general channel is flat).

2. Is the toilet shifter good?

1. Because of the design needs, many owners will consider displacing the toilet, but most of them will worry about the hidden danger of easy to block the imitation plug after displacement, in general, the toilet displacement is not good or bad, of course, it is best not to move, if you really have to move, it is recommended to choose a superior direct flush toilet, and use a flat and wide displacement tube to avoid blockage in the later stage.

2, because the lower drainage of the toilet is straight-through, is the best way to drain, generally do not change the position of the toilet casually, see that some netizens designed the bathroom changed the position of the toilet, lay the lower drainage pipe horizontally under the ground, this is particularly dangerous, the relationship between the washbasin and the shower horizontal laying pipe is not big, because the discharge is water, and the toilet is not only sewage, there are solids in it, once the blockage occurs, so the horizontal pipe is difficult to dredge. In addition, after the use of the toilet shifter, the ground ridge is improved accordingly, and the toilet is also improved at the same time.

It is necessary to move the position of the toilet from side to side, and it is also necessary to install a shifter.

The above are some of the information provided for you about what is a toilet shifter and whether a toilet shifter is good or not, here we want to buy the best toilet shifter, we will choose from its purchase and so on.

1. If you want to change the position of the toilet, you need to use a toilet shifter. Toilet shifter, also called offset, sewage shifter, mainly used in toilet installation, due to the fixed position of the toilet wall and the sewage outlet, the selected toilet sewage outlet and the lower sewage nozzle position does not correspond, resulting in the pipe fittings used in the case of not being able to complete the docking. There are a variety of toilet shifts on the market, ranging from 2 cm to about 3 meters.

Second, the role of the toilet shifter:

A toilet shifter is a device (pipe fitting) that can change the position of the floor drain when the floor drain and the toilet drain are not suitable. The toilet shifter can change the position of not only the front and back of the ground drain, but also the left and right position of the spout, as well as the spacing of the powerstone tank. For example, the wall distance of the toilet is 25 cm, if you can't find the toilet with such a small wall distance, you can use the shifter to move forward 5 cm, and there is a sewer main next to the toilet, if the column is too big, the toilet is too crowded or can not be fitted, and the position of the left and right can be adjusted with the shifter.

3. Disadvantages of barrel shifter:

After the horse is installed with a shift, it is easy to cause the toilet to be blocked, and after the shifter is installed, the air pressure becomes larger due to the increase in curves, which is easy to cause backflow.

Stay 50? Generally, the toilet is at most 40 from the wall, and when my house was renovated, the toilet position was changed. Here's how:

Seal the opening of the original sewer with cement - called the re-opening of the hole - re-discharge the sewer pipe - the sewer pipe is connected to the originally sealed pipe downstairs, and this is an effect of the civil engineering unit. The toilet is not suitable for burying the sewer pipe under the floor tiles, the sewer pipe of the toilet is straight down, and the pipe is so thick, you have to be too high or how much to smash the ground to put the pipe under the diversion Oh 、、、

The toilet is a tool that is often used in everyone's lifeToilet shifterIt is a device that allows the toilet drain and the sewer outlet to be connected when they are not connected. It prevents the toilet from clogging, so it has a strong practicality. So what is the installation method of the toilet shift?

1. The installation method of the toilet shifter.

1.The toilet shifter is a fixed location of the toilet wall and sewer, and the selected toilet sewer is not in the same position as the sewer entrance, so if the docking cannot be completed, the pipe is used. The toilet shifter is a device (pipe fitting) that can change the position of the floor drain when the floor drain and the toilet drain are not suitable, and it is very easy to install the toilet shift.

2.It is better not to install a toilet shifter, but in daily life, if you want to determine the installation, the toilet needs to be moved, then it is necessary to know the specific situation of the installation of the toilet with the shifter, so as not to affect the decoration of the bathroom or the daily use of the toilet.

3.In the current building materials market, the size of the toilet shifter is usually a standard size, and if it is not installed correctly, the upper and lower interfaces will not be able to connect to the center, which can create hidden obstacles in the future, resulting in small ones. Therefore, the toilet shifter is usually installed when the pit distance is too long or too short, and the displacement distance cannot exceed 10mm, and the toilet shifter must be installed after the floor tile sail is attached.

4.When decorating your bathroom, if the location of the floor drain and toilet drain is not suitable, use a toilet shifter to change the location of the floor drain. If the wall spacing of the flush toilet is 25 cm and there are no small flush toilets on the market, you can move it forward by 5 cm to extend the distance and there is a sewer post next to the toilet.

If it's too big, it won't fit the toilet and you'll need to adjust it with a shifter.

2. Precautions for installation.

1.The longer the toilet lifter is moved, the greater the slope. Therefore, before installing the shifter, plan for grounding or raise the ground.

Some shifts don't have much grounding and the drainage space is relatively narrow. However, even if you only move 5 centimeters, when the drain is 10 centimeters, the relationship is still small, which is like a staggered half of the mouth. The lifting distance must not exceed 10 mm, and the toilet lifter can only be installed after the floor tiles have been installed.

2.Toilet lifts in bathrooms are a lot of work, and in addition to toilet shifters, there are two ways to lift the floor and reopen the grip wheel holes. Lift the floor to move the toilet.

You need to connect the pipe to where the pipe needs to be moved, so you need to lift the ground to bury the pipe. Reopening the hole and moving the toilet to change the front toilet to a rear toilet makes it easy to hide the pipes.

The above is a detailed introduction to the installation method of the toilet shifter and the precautions for the installation of the toilet shift. In this feeling, if this toilet shifter is not necessary, it can still be installed, if it is confirmed, then you must pay attention to some precautions. If.

Toilet shifterIt is often found in the bathroom. Now the bathroom is a place that cannot be ignored in home renovation. If the toilet in your home doesn't fit, consider using a toilet shifter.

But many families have only heard the name of the toilet shifter, but do not know how to use it, here is an introduction to the advantages of the toilet shifter and what should be paid attention to when installing the toilet shifter.

1. What are the advantages of toilet shifters?

1. The position of the nozzle can be changed.

A toilet shifter is a pipe joint, a device that can change the position of the floor drain when the floor drain and toilet drain pipe are not suitable. For example, the distance between the toilet and the wall is 25 cm, but if you can't find such a small wall-mounted toilet, you can use a toilet shifter to move the toilet forward by 5 cm. In other cases, the toilet is right next to the sewer.

If the post is large, the toilet is too cramped or cannot be installed, you can also adjust its position using the toilet shifter. If the restroom walls and sewage outlets were originally fixed, and the pipe outlet of the purchased toilet cannot be connected to the sewage pipe of the toilet, pipe fittings will be used.

2. Suitable for hail is used in bathrooms with small wall structures.

The toilet shifter not only changes the position of the front and back of the floor drain, but also the position of the nozzle. In the face of some small sail-type toilets, if you can't find such a small wall-mounted toilet, this time the toilet shifter plays its role. Tan Yuan adjusts to his desired position by constantly moving the distance between them.

However, it should be noted that if the distance between the center of the toilet and the vertical distance from the center of the drain to the wall does not meet the standard.

3. The use of toilet shifter can effectively solve the problem of inconvenient installation.

and adjust the situation of effective treatment of sewage discharge. The toilet shifter in the market is generally about 300 yuan, which is more reasonable.

2. Precautions for toilet shifters.

The toilet is displaced within centimeters.

The position of several water pipes in the bathroom can not be moved, and try not to move. As a rule, the position of the toilet is about 10 cm and a special toilet shifter is used. Since the movement location is not very large, a paper jam is unlikely.

If you want to move a greater distance, you can't use a shifter, you can only modify the sewer.

centimeters above the range of toilet displacement.

If you want to move the location farther away than the dedicated toilet lift, you must raise the toilet floor and add a trap to prevent odor backflow. Since the diameter of the drain pipe is usually 110 mm, the ground should be raised by at least 120 mm to allow some space for cement mortar and downspout slopes.

3. In addition to considering the blockage problem when the toilet is shifted, we must also pay attention to the tightness of the pipe.

The interface location between different pipes should be checked for multiple leaks. One thing to do is to make sure there are no leaks. For the inspection of sealing rings, glass glue and other places must not be missing.

The above are some suggestions for using a toilet shifter, which I hope will be helpful for families who want to renovate their bathroom.