How to remedy the dark color of the floor tiles, how to remedy the dark color of the floor

If the floor is dark, it can be remedied by color matching or lighting supplementation.

1.Color matching method refers to changing the color of other indoor environments to visually brighten the color of the floor, you can match the green plants, furniture, wallpaper and other colors in the home with the floor to find a suitable color distribution, such as laying a lighter carpet on the dark floor, which can not only weaken the color of the floor, but also increase the sense of hierarchy in the interior.

2.If the floor is too deep, you can also use the light filling method to improve the color of the floor, such as increasing the shed light source, using the white wall to increase the reflectivity, and using the light source to make up for the defects of the darker floor, just the right light can weaken the color and visual impact of the floor, and make the indoor space brighter.

There are generally three situations of tile discoloration: 1. The completion time is short, the tile is not dry, and the color difference occurs due to the distinction of water content. 2. The process reason of tile paving is that the tile is paved without sufficient water absorption, resulting in the thickness of the wall on the tile and still absorbing the moisture in the cement, resulting in the phenomenon of penetrating the bottom; 3. The quality of ceramic tiles is relatively thin and uneven, as long as the surface material has some moisture, it will cause discoloration.

First, the water absorption rate is too high, which is also the most common situation. The water absorption rate of ceramic tiles is too high, indicating that it contains high ceramic content and is easy to penetrate into liquid. After the tile is laid, the tile sucks the water from the wet cement mortar from the back, and the water enters the glaze to produce imprints, resulting in discoloration.

Tips for buying bricksWhen buying tiles, you can judge the water absorption rate of tiles by the water droplet test method: drop the water droplets on the back of the tile, and after a few minutes, the more water droplets remain, the lower the water absorption of the tile. If you find that the water stain spreads to the inside of the tile, it means that the water absorption rate of the tile is too high, and the chance of discoloration after paving is also higher.

Second, the glaze of the tile is too thin like a protective film, which can effectively prevent fouling, waterproofing, corrosion, etc., if the glaze layer is too thin, the anti-fouling ability of the tile will also become worse, and a large amount of dirt enters and accumulates in the tile, which will cause the brick color to change. Glaze that is too thin can also lead to problems such as deglazing, glaze loss, and glaze cracking. Of course, the thickness and quality of ceramic tiles are not simply proportional, the concentration, fineness and composition of the glaze, as well as the glazing process, have an impact.

Brick buying tipWhen buying a tile, observe the thickness between the embryo body and the glaze from the side. Secondly, the glaze gloss of high-quality glazed tiles is very high, and it is warm and delicate to the touch. Third, the tile is not soaked in water The brick that has not been soaked in water or is not soaked enough is pasted on the wall, and the tile will also absorb the moisture in the cement after being put on the wall, resulting in a color change.

The time and number of soaking in water are also related, and the new bricks soaked in water once after paving and the old bricks soaked in water twice will have color difference problems. Using the wrong cleaner can remove different stains from the surface of the tile, but it can also have an adverse effect on the surface and internal composition of the tile. Using the wrong cleaner can damage the tile glaze and cause discoloration.

Tips for buying bricksWhen buying, it is best to consult the properties of tiles such as pH resistance in order to choose the right cleaner to prevent the glaze from being contaminated. Fourth, the tile batch, the color number is not the same, there are also consumers will be very confused, it is the same tile, the color is the same when purchasing, but there is a color difference after paving, the problem may be in the tile batch number, color number. Although it is the same model of tile, there will be a slight error in the color of different factory batches, and it is necessary to go through color separation to classify the tiles of the same color into the same color number.

Mixing colors when products are graded out of the factory, or workers do not pay attention to the color number when paving, will lead to obvious color difference between adjacent tiles. Sometimes, in order to clear the inventory, the first merchant will sell a small number of colors to the owner, and the insufficient part is supplemented with another color, which finally leads to the difference in the color of the tiles after paving. Buying brick tipsWhen accepting tiles, carefully check the color number on the packaging box of the same model of product to see if there are products with different batch numbers and color numbers.

If you find a product with different batches and color numbers, you should notify the seller in time or refuse to accept the batch of goods. It is recommended to buy ceramic tiles at one time, if you want to **, be sure to check the batch number and color number of the original product. 5. Water seepage on the wall If the tiles of the toilet and bathroom change color, it is likely that the waterproof project is not done well, and there is leakage on the wall and ground.

Bricklaying tipsThe wall waterproof layer of the toilet and bathroom should be at the top to fully prevent water vapor and fog from penetrating into the wall.