How do I clean up the color of my floor tiles?

In daily life, there are usually the following types of pollution from floor tiles: daily pollution; tea, ice cream, grease, beer; sediment, rust, mortar; paint, drawing pen; soy sauce, vinegar, charcoal; There are also different treatment methods for these types of pollution, such as ink, and the following are the treatment methods for each type of pollution.

1. Daily pollution.

You can use a cloth and then use dish soap and soapy water to clean it.

2. Tea, ice cream, grease and beer.

It can be cleaned with a soda ash solution.

3. Sediment, rust, mortar.

Use sulfuric acid or hydrochloric acid solutions. Drop it on the brick surface, let it stand for a few minutes and then wipe it, taking care to protect your hands. Amway has a special tile cleaner that works quite well!

4. Paint, drawing pen.

It can be wiped with turpentine, acetone, and toothpaste used at home also has a good stain removal effect.

5. Soy sauce, vinegar, carbon powder.

The effect of using toilet cleaner is better.

6. Ink. It can be removed with Amway tile cleaner or toothpaste.

Note: Commonly used cleaners in the home.

Toilet Cleaner, Toilet Cleaner, Toothpaste, Amway Tori Tile Cleaner, Qianyixi Ceramic Brush and Qianyixi Ceramic Stain Remover (good stain removal effect for stubborn stains).

How to remove the color of the floor tiles:

Material preparation: laundry detergent, flour, white wine, white vinegar, watering can, scouring pad.

Step 1: Pour an appropriate amount of laundry detergent into the watering can (laundry detergent has a good cleaning and stain removal effect).

Step 2: Then pour the liquor into the watering can (liquor is water-soluble, which makes the solidified pigment water-soluble).

Step 3: Then pour an appropriate amount of white vinegar into the watering can (white vinegar contains acetic acid, which can break down the solidified pigment).

Step 4: Then pour an appropriate amount of flour into the watering can (flour can absorb water-soluble pigments).

Step 5: Screw the lid on the watering can and shake the laundry detergent, flour, liquor, and white vinegar by hand evenly.

Step 6: Use a watering can to spray the tiles and carefully wipe the colored parts of the tiles with a scouring pad.

Step 7: The color on the floor tiles has been cleaned.

The floor tiles are dyed with color, and the treatment steps are as follows:

1. Pour 1 capful of laundry detergent into the mineral water bottle.

2. Pour in 2 capfuls of white vinegar.

3. Pour in 3 capfuls of alcohol.

4. Finally, pour in half a cap of flour and mix well.

5. You can start to clean it, dip some mixture and wipe it with a scouring pad in the place that needs to be cleaned, and the tile will be as clean as new.

Extended Materials: It can also be handled in the following two ways:

1. It can be removed with detergent, laundry detergent, etc., some brands are equipped with special cleaning agents, and the cleaning effect is better, and special cleaning agents such as super water, Mr. Vermeer, etc. are sold in floor tile sales merchants or large supermarkets.

2. Lemon juice has citric acid, and fresh lemon juice can also be squeezed and rubbed repeatedly on the dyed floor tiles. Citric acid is one of the most commonly used cleaning products. Properties of Citric Acid Cleansing Citric acid has many properties that even outweigh its ability to disinfect, bleach, and eliminate fat.

First, the use of professional removal practice, the use of chemical decomposition method to decompose the pigment components that penetrate into the polished brick and floor tile, no bad smell, can not damage the surface medium, clean thoroughly, and restore the original gloss color after cleaning.

Second, you can use super water, put a single layer of toilet paper on the stain, used to absorb the super water and not let it flow around, according to the ratio of 1:1, mix and shake and pour it on the stain, a little more, make it saturated, stay for 30-50 minutes to penetrate and decompose, and then wipe off the residual stain with a wet towel, if there are shallow stains, you can pour the C type directly on the mixed AB water, they will quickly react to form a new cleaning function, soak for 10-20 minutes, you can remove.

The tile is stained with color and removed with the following method:

1. Use professional cleaning agent to decompose the pigment components that penetrate into the interior of the floor tile by chemical decomposition method, there is no bad smell, the surface medium can be cleaned thoroughly, and the original gloss color will be restored after cleaning.

2. Clean the place, put more water on it, see if the water can seep into it and not dilute it into the lead and bricks of the limbs, talk about it, if it doesn't work, replace the water with 84 of the agitation, put more, see if it can decompose the color inside, if the calendar is not good, then the best solution is to spend some money, let the division pay to knock off the new bricks.

Summary. The floor tiles are dyed with color, and the following four methods can be tried:

1. Use floor cleaner, floor staining is more stubborn, and it will be more effective to use floor cleaner.

2. Soapy water and rags to clean the floor tiles, soapy water has a good cleaning effect and can remove staining.

3. Clean the tiles with hydrogen peroxide, wipe them with a cotton swab during use, and it will be cleaner.

4. Toothpaste removes tile staining, toothpaste has a whitening effect, and can achieve the effect of decontamination and discoloration of ceramic tiles.

What to do if the floor tiles are stained.

The floor tiles are dyed with color, and the following four methods can be tried: 1. Use floor cleaner, the floor staining is more stubborn, and the use of floor cleaner will be more effective. 2. Soapy water and rags to clean the floor tiles, soapy water has a good cleaning effect and can remove staining.

3. Clean the tiles with hydrogen peroxide, wipe them with a cotton swab during use, and it will be cleaner. 4. Toothpaste removes tile staining, toothpaste has a whitening effect, and can achieve the effect of decontamination and discoloration of ceramic tiles.

I've used it all, but I still can't get it off.

If it is a full-body brick color, if it has penetrated into the brick, it will definitely not be removed, if it is glazed, it can be wiped off.