What is the size of the first chapter What is the general size of a rectangular seal

There is no uniform regulation on the size of the calligraphy chapter, according to the writer's own preferences, it is generally suitable for the size of the letter, which is 60-80% of the typeface, and the size of the paper has nothing to do with it. Therefore, calligraphers and painters have many stamps of various sizes to spare.

Calligraphy chapter notes:

1) When the seal is not too close to the word, generally the distance between a seal, if two seals, the second chapter is also a seal from the first seal.

2) The size of the seal depends on the size of the work, not too big and not too small, too small can not play the role of stabilizing the work, too large not only destroys the balance but also a bit noisy. Under normal circumstances, a two-centimeter seal is used for a three-foot whole xuan, a four-foot whole xuan is used for centimeters, and a three-centimeter seal is generally used for a six-foot and eight-foot whole xuan, so you should prepare several seals.

3) When stamping, it must be upright, and it can not be reversed, at the beginning, you can make a "seal gauge" if you are not proficient, make a right-angle thing, and use it to card the position.

There are many sizes of the first chapter, generally speaking, the first chapter of Dou Fang's work should be round or square, with a size of about 2cm to about 2cm; The introduction of the vertical work should be rectangular, with a size of about 3cm to about 3cm. For larger works, the size of the introductory chapter should also be increased accordingly.

You can choose on a case-by-case basis, and for more detailed information, look for help from the person involved.

The sizes of the square seals are: 16x16mm, 18x18mm, 20x20mm, 22x22mm, 25x25mm, 30x30mm, respectively, individual (small private), collective, general state-owned, joint venture, large state-owned legal person seals.

The square seal is solemn and generous, and since ancient times, whether it is an official seal or a private seal, it is mostly a square.

There is no size regulation for personal private seals, and there are more 6*13

1. Size:

1. The size of the official seal of the general enterprise and **** is 40x40mm.

2. The size of the official seal of the self-employed person is 38x38mm, and the round edge is wide.

The version is 1mm.

Second, the right to appearance:

1. ** Five-pointed star, five-pointed star outside the name of the company, from left to right circulation, or the first paragraph of the name from left to right circulation.

2. The back section is arranged horizontally from left to right, and the seal text uses simplified Song characters.

1. Standards for filing a case for the crime of privately carving an official seal:

As long as the perpetrator commits the act of privately carving the seal of a company, enterprise, public institution, or people's organization, it constitutes a crime in principle and shall be filed and investigated.

2. Penalty standards for privately engraved official seals:

1. Whoever forges, alters, buys, sells, or steals, snatches, or destroys official documents, certificates, or seals of state organs shall be sentenced to fixed-term imprisonment of not more than three years, short-term detention, controlled release, or deprivation of political rights; where the circumstances are serious, the sentence is between three and ten years imprisonment.

2. Whoever forges the seal of a company, enterprise, public institution, or people's organization shall be sentenced to fixed-term imprisonment of not more than three years, short-term detention, controlled release, or deprivation of political rights.

3. Those who forge or alter resident identity cards are to be sentenced to up to three years imprisonment, short-term detention, controlled release, or deprivation of political rights;

4. where the circumstances are serious, a sentence of between three and seven years imprisonment is to be given.

State-owned enterprises, state-owned joint-stock enterprises and other public enterprises.

Du chapter (including the company chapter zhi, department chapter) are all circular, straight dao diameter, ** all published special five-pointed star, the direct diameter of the star tip, the width of the round edge, the name of the five-pointed star outside the unit, from left to right circulation, or the first paragraph of the name from left to right circulation, the back paragraph from left to right horizontal row, that is, the name of the unit and department is placed under the star for horizontal arrangement, and the printed text uses simplified Song characters.

The inscription chapter of hard pen calligraphy is generally 8-10mm. It is worth noting that hard pen calligraphy generally does not need to introduce the first chapter, but it can also be stamped with one side to have an aesthetic effect.

Of course not.,There's no way to be the same.,Generally, the shape of the first chapter is far from the end of the chapter.。

The size and shape can be different. There is a hierarchy in this way.

The diameter of the good quality is centimeters, and the diameter of the difference is centimeters.