-
Anonymous users2024-02-12How to use a restraint belt after giving birth? Hurry up and take a look.
-
Anonymous users2024-02-11Precautions for using restraint straps:
1.It should be clearly explained to patients and relatives before use, and if it can be used, it should be eliminated as much as possible.
2.Defensive braking system countermeasures should only be used for a short period of time, and it is necessary to pay attention to the patient's comfort in lying down, and change positions frequently.
3.The position of the tube should be placed, the tightness of the restraint belt should be suitable, and the pressure release and massage part should be performed regularly to promote the blood circulation system.
5.The patient's body is placed for basic functions.
6.When applying the restraint belt, the gasket should be about thin, and it must be tightened and fitted if it is fixed, and its tightness should be able to reach into 1 2 fingers. Pay attention to the unrestrained position of the blood circulation system every 15 to 30 minutes, including color, temperature, activity and feeling, etc.;
Perform the release every 2 hours, change the patient's posture, and give unrestrained physical fitness exercises, if necessary, carry out partial massage to promote the blood circulation system.
7.Record the reason for the application of the maintenance equipment, the time of application, the results of each observation, the relative care measures, and the time to remove the restraint.
-
Anonymous users2024-02-10Answer: When using the restraint belt, the padding should be padded under the belt, and the fixing must be appropriately tight, and its tightness should be able to reach into 1 2 fingers. Pay attention to observe the blood circulation in the restricted area every 15 30 minutes, including the color, temperature, activity and sensation of **; Regular release every 2 hours, change the patient's posture, and give restrained limb movements, and local massage if necessary to promote blood circulation.
Record the reason for using the protective gear, the time, the results of each observation, the corresponding nursing measures, and the time when the restraint was released. Precautions for using restraint belts are:
1) Sign the informed consent form.
2) Strictly grasp the indications for use and try not to use them.
3) Loosen regularly, pay attention to the condition of the restraint part.
4) Record the time of constraint and the time of release of constraint and corresponding measures.
5) Assess the patient's limb muscle strength with **, avoid unnecessary restraint, and generally muscle strength below grade 3 can be lifted.
-
Anonymous users2024-02-091. Be sure to use the palms of both hands to slowly push the abdominal muscles and the deep uterus slowly upwards from the pubic position, and then strengthen and fix the abdominal belt from the pubic bone.
2. Don't only tie the stomach and upper abdomen, but omit the most important lower abdomen, which will cause the uterus to droop; In addition, the pressure applied is also to tighten the lower abdomen (below the navel to the pubic band in the middle belt), at this time the force is greater (tied tighter), and when it reaches the stomach, the force of the binding is looser, that is, the Yuan Xiang destruction rule of tight and loose top, so as not to push the organs of the body to the lower part.
-
Anonymous users2024-02-081. Be sure to use the palms of both hands to slowly push the abdominal muscles and the deep uterus up from the pubic position, and then strengthen and fix the abdominal belt from the pubic bone.
2. Don't only tie the stomach and upper abdomen, but omit the most important lower abdomen, which will cause the uterus to droop; In addition, the pressure applied is also to tighten the lower abdomen (below the navel to the pubic bone), at this time the force is greater (tied tighter), and when it reaches the stomach, the force of the binding is looser, that is, the principle of tightening and loosening, so as not to push the organs of the body to the lower part.
-
Anonymous users2024-02-07Precautions for using restraint belts:
First, first of all, it is necessary to assess the patient's condition, confirm his condition, consciousness, vital signs and limb activities, etc., patiently explain to the patient before use and fully respect the opinions of the patient and his family, and obtain the cooperation of the patient and his family during the use process.
2. Determine whether there is ** friction damage in the stuffy mold of the restraint part, as well as the blood barrier fluid circulation disorder. It is important to pay attention to the blood circulation of the terminal limbs, especially the feet and feet, to avoid vascular occlusion and even avascular necrosis, and release it for at least 20 minutes every 1 hour. If the patient's terminal limbs are blackened, ischemia, painful, numbness and weakness, the corresponding vascular morphology must be observed.
Try to use the abdominal band one month after giving birth, and when using the abdominal band, never choose to eat dinner or go to bed, because this will have a certain impact on the body, and it will be very uncomfortable.
In order to protect the trees and fruits from pests and diseases, pesticides are often sprayed in the garden. However, apple pears are sensitive to certain pesticides and are often prone to pesticide damage when used improperly. Some pesticides damage the fruit surface and affect the appearance of the fruit; Some pesticides cause leaf damage, affect photosynthesis and reduce flavor quality; Some pesticides have the effect of thinning flowers and fruits, and improper use will cause flowers and fruits to fall and reduce yield. >>>More
1) Check whether the tape and joints are damaged before driving, and if there is damage, repair it in time; Check whether the fixed part is loose, if there is looseness, it should be tightened in time; At the same time, it is also necessary to check whether the upper and lower rollers are damaged and fall off, and if so, they should be replaced in time. On the basis of the above inspection, add lubricating oil to the transmission drum and the reversing roller, the upper and lower rollers, and ensure that the oil volume of these components is sufficient and the lubrication is good, you can send a contact bell signal to the other party (especially the contact bell signal must be sent when the longer belt conveyor is running), and wait for the other party to drive after the force, and then no load test, the time of no load test should generally be 1-2h, but the small should be less than the entire belt length to run a cycle; During the test, the belt should not deviate, the driving device should run smoothly, and there should be no undue friction between the moving parts, the fixed cover and the blanking port. After the test run is normal, it can be loaded. >>>More
The surface damage of the sling is an important factor in the reduction of the strength of the sling, so when the surface is worn, the sling will be damaged sharply. Some fracture (not fault) of the fibers on the surface of the sling is inevitable, as long as it is not too large, it will not affect the use. >>>More
The installation method of the strip light is as follows:1. First determine the length of the installation, and then take the integer to intercept. >>>More