Is there any solution to the self built houses in rural areas, which are cold in winter and lack of

1.Since many rural areas do not provide central heating, the winter heating of self-built houses in rural areas has become a concern for everyone. Many self-built houses in rural areas will choose air conditioning for heating in winter.

Due to the limited heating area of air conditioning, it is not practical in the northern winter, and the northern home heating system can use gas wall-hung boilers.

The wall-hung boiler heating system uses natural gas as fuel, and circulates water through the heating system to dissipate heat from the heat dissipation terminal to achieve the purpose of indoor comfortable heating. This hot water circulating heating system dissipates heat evenly, fast, and the indoor temperature is stable and warm, making the experience more comfortable.

2.Coal stove heating is a time-honored form of heating. It is relatively inexpensive and can also combine heating and cooking functions in one.

Therefore, it is loved by many people. However, it also has several drawbacks. First, it consumes a lot of energy, and there are great safety risks.

Second, the direct exhaust chimney is easy to lead to gas backflow, which is harmful to human health. The standard of living in rural areas is gradually improving, especially in coastal cities, where life is even better than that of urban people. Therefore, when renovating, people will install air conditioners so that they can be used to cool or heat whether it is summer or winter.

3.However, air conditioning is not very effective in heating in winter. The weather is dry, so you need to put a basin of water indoors to moisturize.

With the gradual improvement of rural living standards, many rural people will now install floor heating when decorating. As long as the underfloor heating pipes are laid under the floor, the temperature can rise from the bottom up, so as to achieve the purpose of rapid heating. However, this heating method also has some drawbacks, that is, the scope of application is not spacious enough.

In addition, the quality of floor heating on the market is uneven, and people who do not understand the market can easily buy inferior products.

4.Collect radiators.

Heating: In many rural areas in the north, due to the relatively low temperature, collective heating equipment will also be installed in rural areas to ensure that rural people can heat normally in winter. But collective heating is only suitable for the north, not for the south, and there are some shortcomings, so it is still not cost-effective.

Electric heaters: Typically, the most widely used heating device in rural areas is electric heaters. There are many types of electric heaters, one is an electric fan.

law, the other is a rectangular heater with feet. These two types of heaters are now common heating devices in rural areas.

A better solution is to light a stove in the house, place an electric heater, buy some heaters, buy a heater, install radiators, these are all better methods.

There is a way to solve it, you can put some heating equipment in the house, you can place a heater, or you can make a water heating kang, or you can put a heat fan in it.

You can make your own stove, which will solve the heating problem and will also make the whole winter extra warm.

If the heating is insufficient, you can buy some floor heating, and it is more convenient to do floor heating now.

Shanxi's approach is inadequate.

At a time when carbon emissions have peaked, it is imperative to switch from coal to clean energy. However, we must not enforce policies rigidly and rigidly.

Heating for the elderly should be arranged.

Then again, heating in the countryside is a real problem. Coal has always been used for heating, and now only clean energy can replace it. You can change the electricity and enjoy the peak and valley electricity price.

It can also be installed with clean energy such as solar energy and air energy, or a photovoltaic power generation system, which can also be used for heating.

Electric heaters for coal-to-electricity conversion stations.

There are several ways to heat self-built houses in rural areas: the first type of soil heating is to install an earthen boiler, connect a radiator, and heat by burning wood or coal; The second way is to build a fire dragon (also known as a kang), the fuel is mainly sawdust, leaves, cow and horse dung, broken straw and grass cutting, etc., this way of heating energy saving and environmental protection, worth promoting. The third way is electric heater and air conditioner, which will be limited in use due to national power rationing.

The fourth is biogas and natural gas wall-hung boiler heating, clean energy, the effect can also be used, but the cost is too high. The fifth way is solar heating, which is not very effective. Therefore, at present, it is still commonly used.

One or two ways.

Self-built houses in rural areas have ondols, and homes with good conditions have heating, so heating in winter is not a problem.

If you want to heat your own house in the countryside in winter, you can install a gas sheet and then burn the gas to heat it, which is a more economical way.

Nowadays, most of the household radiators can be used separately by each family, and a lot of fuel needs to be consumed, including gas, liquefied gas, and coal, and there are many places to install them, such as balcony, kitchen or under the window. The heating effect of this radiator is ideal, but it makes the room drier and takes up a lot of space, which will affect the aesthetics of the room. Electric heaters are dangerous, and electric heaters are more suitable for small areas of home use, easy to use, and can be turned on at any time to enjoy the warmth.

However, this kind of equipment, the human body needs to be close, and the electricity consumption is also very large, and it is easy to be burned, and the potential safety hazard is relatively large. In the same way as this type, there is also an electric blanket, which is also more dangerous, and the wiring is prone to breakage, etc., and it is not suitable for the elderly, children, pregnant women, etc. No need to install, buy and use, the temperature can be adjusted, turn on and off at any time, no need to be supervised; The procurement cost is high, and the operating cost is high (electricity).

Suitable for private rooms or small area heating. In recent years, many floors have adopted the method of floor heating, laying pipes directly on the ground, the problem is faster and more uniform, and the overall feeling of the family is more ideal. This type of heating is suitable for a wide range of places and is currently very popular.

Hello! The heating of rural self-built houses in winter is generally a raw stove, directly connecting the stove to the radiator, and the stove will also be connected to the kang, the radiator is hot at the same time, the kang will also be very hot, mainly to burn coal, so that the house is also warm, and the kang will also be very warm, so that the winter heating of rural self-built houses should be mainly based on the raw stove.

How to heat up in winter in the northern countryside:

1. Build a stove at home and connect the heater to heat yourself, which is a common way in rural areas in the north, the stove can be used for heating, boiling water, and cooking.

2. Install air conditioning.

3. Use a movable electric heater.

4. Flushing hot water bottle or charging hand warmer.

I think the house covers an electric solar cell version and a wind turbine with electric heaters for heating and air conditioning. The roof does not need to be ironed and waterproof for many years, and it can also save electricity and money by yourself, which is more convenient to maintain.

Now the countryside pays attention to three ponds and one change, if you can, then use a biogas digester, or find a house with a straw vaporizer to burn heating!

There is no shortage of coal in the northwest, and coal-fired boilers are hot for hot water, and floor heating is more comfortable.

Earthen heater, the kind that burns by yourself.

The heating methods of rural self-built houses (bungalows) include: coal-fired heating, earth heating, orange gas heating, solar heating, electric heating, air conditioning, electric floor heating, etc.

The first thing to do in rural house heating is to do a good job of insulating the room, if you don't do insulation, any heating system is in vain.

1.Choose a leeward and sunny terrain to build a house;

2.Doors and windows should have a certain thermal insulation effect;

3.The best choice of light hollow bricks or similar materials for the wall, and insulation materials are added if conditions permit;

4.Choose energy-saving and environmentally friendly building materials.

How to heat up in winter in the northern countryside:

1. Build a stove at home and connect the heater to keep warm, this is a common way in the northern countryside, and the stove can be used for heating, boiling water, and cooking.

2. Install air conditioning.

3. Use a movable electric heater.

4. Flushing hot water bottle or charging hand warmer.

1.Gas heating.

Nowadays, the use of natural gas for heating has become more common, and biogas can be used as gas heating in rural areas. Straw gas stove is equivalent to turning waste into treasure and is an economical way to heat up. The use of vegetable fuel through the gas furnace, under closed anoxic conditions, the use of dry distillation pyrolysis and thermochemical oxidation to produce a flammable gas, mainly containing carbon monoxide, hydrogen monoxide, methane, ethane, propane, etc., also known as biomass gas, straw gasifier, is farmers do not spend money"Liquefied gas"

2.Burn electricity for heating.

Small sun and warm hair dryer can be regarded as the most common and approachable type of heating equipment using electric energy on the market, which is deeply loved by ordinary rural Giti users. This kind of heating equipment can be bought in large and small supermarkets, ** at about 100 yuan, very close to the people, and it is very convenient to use or store, it can be heated soon after connecting the power supply, and it takes up less space.

3.Clean coal + supporting stove for heating.

Compared with other clean energy heating methods, the cost of clean coal heating is relatively low, the guarantee is relatively stable, clean coal is flammable, high calorific value, long sealing time, burn-resistant and coal-saving, low consumption, no need to add coal frequently, time-saving and labor-saving, better use, greatly reducing the amount of coal used, more economical and energy-saving. Clean coal burning is low sulfur, low ash, low volatile, and more fully combusted, which can effectively reduce the emission of pollutants such as carbon monoxide, sulfur dioxide and nitrogen oxides. After combustion, less smoke and dust is generated, which can effectively reduce the pollution to the atmosphere, thereby improving the living environment.

Coal combustion is basically low-altitude direct discharge, and the combustion products are easily inhaled by the human body. The sulfur content of clean coal is low, there is no black smoke and no peculiar smell when burning, and the harmful substances produced are less, and the harm to the human body is very low, which can effectively reduce the phenomenon of gas poisoning in winter.

Stoves, ondols, underfloor heating, air conditioning, and in some places in rural areas, you can also connect heating.

The width of the strip rubble foundation is meters, and the depth is appropriate. The surface is raised about one meter, and the backfill is first made of clay, then gravel, regret sand, a layer of mortar, a layer of waterproof material, and a layer of 80mm extruded plastic board. Then there is a layer of ground, double-layer two-way steel bars are configured with 150 thick floor slabs, 400x400mm columns, and the floor height should not be less than meters.

The outer layer of the wall is 120mm red brick + 80mm extruded plastic board + 200 thick sand aerated block to form a 400mm thick thermal insulation wall. The roof is 150 thick floors, inclined roof, the south slope is long and the north slope is short and steep, maximize the use of the south slope to obtain sunlight, and solar collector panels can be installed in a large area for heating in the future! The roof is first a layer of waterproof, 80mm extruded plastic board, then a layer of waterproof membrane, a mortar protective layer 25mm to 30mm thick, and the surface is made of linoleum tile.

There are conditions to make inclined roof skylights, and the attic is set up with 3 to 5 tons of thermal insulation water tanks and bathrooms! This house, no villa will be changed!

Insulation should be comprehensive, not only the exterior wall, but also the roof and the ground, needless to say, the ground can be mixed with 1:10 cement perlite and water to spread 200 thick compaction (200 thick after compaction). Wipe 1: cement mortar protective layer on the top, and then decorate it on it.

1.The ondol is more suitable for the climate of the Northeast.

2.The rural earthen boiler with radiator, the price is not high and very practical, the advantage is that the boiler wants to go to the kang hole, and if you want to go to the radiator, you can take the radiator.

3.There are two layers of windows, and the sliding door window can only be opened halfway, and it is best to open both windows to better ventilate.

4.The walls should be thicker, and the insulation should be added. If the house is big enough, you can make a partition on the north side, the house will be particularly warm, and you can also put vegetables in the partition.

5.It is more practical to use solar energy in rural areas.

Thinking so much for now.

At present, there are various heating methods, and for houses that have been renovated, you can use wall-attached electric heating film

Electric heating wall film: the second generation electric heating film, laid on the wall, the third generation electric heating film can be used on the ground.

There are three most common specifications of electric heating film according to the appearance and shape: 50cm width, 80cm width, and 100cm width.

There are generally two specifications of electric heating film according to power: 220 watts per square meter 400 watts per square meter 220 watts electric heating film belongs to low-temperature electric heating film, mainly used in the floor heating industry: 400 watts are mainly used in other aspects besides floor heating, such as drying, etc., 400 watts electric heating film belongs to high-temperature electric heating film, and the temperature can reach more than 70 degrees.

The electric heating wall film is made of 220 watts.

It is also possible to use the latest carbon crystal electric heating wall system, which is a new type of wall low-temperature radiant heating system developed with "carbon crystal heating plate" as the heating component.

The carbon crystal electric heating plate system makes full use of the excellent plane heating characteristics of the carbon crystal plate, and the whole plane is heated synchronously during heating, continuous heating, and the wall thermal balance effect is good. It overcomes the disadvantages of discontinuous heating and poor thermal balance effect of traditional heating products.