What is the construction process of heating decoration? How to tell how many sets of heating to add

For many families, after the renovation is completed, they want to increase the heating, but find that the walls and floors of our home are completed, and the choice of increasing the heating is not very large. Because we added heating later, it is impossible to dismantle all the original decoration of the home and redo it. At this time, it is necessary to consider the specific situation after the completion of the decoration to make a choice.

The following questions are used as an example to answer the question of heating method selection after decoration. Renovated houses can be heated by surface-mounted heating. The so-called surface-mounted heating and surface-mounted radiators refer to the installation of pipeline wiring and radiators in accordance with the reasonable layout design on the basis of the customer's home has been decorated.

It does not affect the overall decoration.

<> can give full play to the heat dissipation performance of the system, in fact, surface-mounted heating, regardless of whether it is decorated or not, regardless of whether the house is new or old, it can be installed and suitable for all families with installation needs. At the same time, I like the heating method with water as the medium in the north, but if you want to use the heating method with water as the medium, you must install radiators or floor heating, the subject has said that the house has been renovated, and it is impossible to install the floor heating coil, and dislike the ugliness of the heating pipe, so the house that has been renovated, want to install heating, which heating method can be installed both plumbing and beautiful? Let's start with heating equipment.

Warm with skirting feet, it is a baseboard radiator, and the outside is a high-grade solid wood baseboard, but the material is aluminum alloy, and there are waterways and fins in the back, which are integrated with the visible panel.

It is equivalent to the traditional column radiator one by one dismantled around the room and installed, not only the heating effect is good, but also from the human foot heating, the foot warmer is cold, very comfortable, especially the family with children can climb on the ground, will not feel the ground cold at all. If you want to be beautiful, choose floor heating, but the cost of micro repair will be better, and you will have to clean a few pieces of one square meter after a long time. Or just make surface-mounted radiators Now the new heating package also has a variety of styles for you to choose from.

And the cost of minor repairs is slightly lower. At present, many communities do not have central heating and have to burn their own gas, and they have to pay thousands of yuan in winter.

To go to the wall, ceiling, etc., but to be compatible with aesthetics, give full play to the heat dissipation performance of the system, it depends on how much space is in the home, you need to add several groups of heating, this does not have to add a few groups.

Heating construction will first look at the home needs to install floor heating or wall heating, first of all, according to the place where you want to connect, start to walk the water pipe, divide the hot water pipe and the return pipe. The plumbing buyer picks out some good material water pipes, and the merchant will help you contact the workers who walk the line to start the construction, which is normally a room and a set of radiators.

Its construction process is to lay pipes under the floor tiles, and then connect them to the valve at the doorway. By the area of the home, I choose central heating.

The installation time of the heating in the new house needs to be after the civil works (flooring, wallpaper) are laid, and before the installation of the switch socket.

The overall sequence of new house decoration is cabinet installation, wooden door installation, floor installation, wallpaper paving, radiator installation, switch and socket installation, lamp installation, hardware and sanitary ware installation, curtain installation, pioneer cleaning, furniture installation, and household appliance installation.

It will take about half a month to complete all the installation links. Industry insiders told reporters that the installation of wooden doors, floors, wallpaper, radiators, etc., if it goes well, the actual installation will only take one day.

Although some product installation can be carried out at the same time, but cabinets, floors, wooden doors, these "main material large pieces", try not to make an appointment at the same time in the same day to install together, because these large pieces are pay attention to "three points of products, seven points of installation", the installation link is very important, it is best to install the same in one day, rather than "one heart and two purposes".

The installation of radiators is generally divided into two steps: the first phase of the project and the second phase of the project.

The first phase of the heating project is carried out after the wall is remodeled, before or after the construction of the water and electricity facilities and must be carried out before the construction of other decoration processes.

The first phase of the heating project includes: positioning, slotting, pipe routing (pipe modification), pipe connection, pressure test and so on.

After the decoration work is carried out until the wall is painted or the wallpaper is pasted, the second phase of the heating project construction, the installation of the radiator, and the installation of the ice pressure test can be carried out before the installation of the floor.

The second phase of the heating project includes: the installation of radiators (fixed suspension of radiators, the connection of valves and radiators and heating pipes), the pressurization inspection of the whole system, and the commissioning of radiators.

Radiator installation is divided into open and concealed installation, exposed radiator is more convenient, even if the installation of radiator is done after decoration, concealed radiator needs to be laid in advance, decoration, concealed radiator is done before civil engineering. The decoration sequence is water, electricity and heating, and then the ground, walls, doors and windows, etc. The most important time for the installation of radiators should be arranged after all the procedures on the walls of the house have been processed, so as to create the best installation results, which will not affect the painting of the walls and will not cause damage to the floor.

When is the most suitable time to install radiators — March-November is the best.

We all know that March to November is in the non-heating period, and it is also the best period for house decoration. At this time, the installation of radiators can be completed simultaneously with the decoration of the house, which will save a lot of costs and reduce a lot of trouble.

Heating installations are generally carried out along with water and electricity. Or you can choose to install radiators after decoration. Chengdu Smith Home Heating has been supervised by manufacturers from system design to construction, and strictly adheres to the construction quality!

Chengdu Smith's wall-hung boiler adopts a staged combustion technology, which only burns half without too much hot water, which saves more gas; In addition, the anti-carbon monoxide poisoning device is also installed separately, so that the family can use it more confidently.