How to project the screen of Meizu wired, how to cast the screen of Meizu mobile phone on TV

Here's how to cast your phone's screen to your computer:

First, first of all, make sure that the phone and computer are on the same network, open the start icon in the lower left corner, and click Settings in the start icon.

2. Enter the settings interface and open the system.

3. Click Project to this computer on the interface that opens, and open the corresponding settings.

Fourth, now that the computer is set up, the next step is to operate the mobile phone, with Xiaomi mobile phone.

5. Turn on the wireless display.

6. Wait for the phone to scan the device, and then click on the device you want to connect, then your computer will pop up a reminder that you need to pair, just like Bluetooth pairing, select Yes, then your phone screen will be displayed on the computer.

1.Turn on your phone, tap "Settings" on your phone, and then tap "Other connection methods".

2.Found"Cast the screen", tap it, and then turn it on (some Meizu phones have a screen casting function in "Display").

3.Open IPTV, tap Apps, and then tap Wireless Display.

4.You can see that the mobile phone and TV are connected, and they can be connected in a few seconds. Once connected, you can project your phone's screen onto your TV.

Before, you have to find this scalp mode on the phone, and then, find the device you want to connect to match successfully, and then you can use the screen casting.

Wired projection can buy TV fruits, and then connect them for screen projection, which is a relatively simple way.

If you want to cast the screen with wire, use a data cable to connect it to the desired channel.

Take Meizu 17,flyme8 system as an example,Meizu mobile phone screen projection on TV,First make sure that the wireless network of Meizu mobile phone and TV is in the same wifi,Then enter the Meizu mobile phone desktop,Click Settings,After entering the settings interface,Click the option of device connection,Search for connectable devices,Click connect to project the screen to TV。

With the development of more and more intelligent trends in daily life, the function of Meizu mobile phones has expanded its business to projection to TV, because the mobile phone screen is smaller, the function of projecting to TV is convenient and enriches people's lives, and the specific practice of Meizu mobile phone projection to TV is as follows:

1. Disconnect the mobile network settings of the Meizu mobile phone to ensure that the wireless network of the Meizu mobile phone and the TV are in the same wifi, so as to facilitate the normal connection of the two.

3、Open the TV,My application,Find the relevant specific software,If there is, open it directly。 Similar functions can also be achieved by installing third-party screen mirroring software.

4. Click the connection of the Meizu mobile phone to cast the screen to the TV.

This answer applies to most Meizu phone models.

1. After getting the Meizu phone and turning it on, open the main interface, the screen may show that different models may be different, just find the setting option;

2. Click Settings to enter the mobile phone settings interface, find other connection options in the interface, and then click to enter;

3. After entering other connection methods, you will find that there is an option to cast the screen, after turning it on, you can see what devices are available;

4. Open the network computer, find the application option, and then find the wireless display option, click to enter, different computers may operate differently, as long as you find the wireless display.

1. Projecting the screen, simply understood is to transmit the mobile phone wirelessly and completely synchronize it to the large monitor or TV. Required equipment: MX4 (or MX3, MX4 Pro, Meizu Note) mobile phone, TV with Miracast function (or normal monitor + Miracast connector + HDMI wiring), power supply, Wi-Fi.

2. Connect the monitor and Miracast connector with HDMI wiring first, and then connect the power supply to turn it on. Then turn on the phone - Settings - Display - Cast screen switch, which can automatically search for the device to connect.

3. The implementation process of Meizu Flyme projection screen is actually very simple, first use HDMI wiring to connect the monitor and Miracast connector, connect the power supply to turn on the TV or monitor. Then open "Cast Screen" in Settings - Other Connection Methods - Cast Screen in Meizu Flyme.

iOS: Put your phone and TV on the same network, open the control center on your phone, and select AirPlay screen mirroring and screen mirroring TV. Android:

2. Click the [Cast Screen] option.

3. Turn on the switch on the right side of the projection screen, and select the TV device you want to cast the screen to connect.

This article takes Meizu 18 as an example and applies to the flyme9 system.

Using a mobile phone to project the screen to the computer, everyone must have used it a lot, but how to cast the screen of the mobile phone to another mobile phone, I don't know if you have used it?

Open the AirDroid Cast software on your phone, and click [Receive Projection] at the bottom to see that there is a set of projection codes.

Turn on AirDroid Cast on another mobile phone and enter the screen casting code on the receiving screen, and it will be automatically connected after the input is completed.

If it is the first time to connect, a pop-up window will appear on the phone to remind you whether to agree to cast the screen, you can choose to trust the device, and agree to the projection, and the screen on the other phone will appear on the phone.

After the screen projection is successful, you can click on the left side to rotate the screen, horizontally ** the mobile phone desktop, and you can press and hold the screen with two fingers to zoom out and enlarge the mobile phone desktop.

If you need to talk on your phone and phone, you can also turn on the "microphone" and "microphone" functions, so you can communicate even when you are not in the same place.

Give it a try!

You can only use one projection screen and use a network with TV to project the screen.

2. Click on the [Cast Screen] option.

3. Turn on the switch on the right side of the cast screen and select the device you want to cast the screen.

This article takes Meizu 18 as an example and applies to the flyme9 system.

Projecting the screen, simply understood, is to transmit the mobile phone wirelessly and fully synchronize it to a large monitor or computer. How it works:

1. Connect the monitor and the Miracast connector with HDMI wiring first, and then connect the power supply to turn the monitor on.

3. After the connection is successful, the mobile phone and the display can be fully synchronized.

Note: When you need to disconnect, you can close it directly in the notification bar.

Miracast users can view smartphone shots** on a large-screen TV, share a laptop screen in real-time via a conference room projector, or watch live programming from a home TV set-top box on a tablet.

How to use: After purchasing a receiver device that supports Miracast, connect the power supply, HDMI interface (to connect to the monitor), turn on the screen projection function of the mobile phone, look for the nearby Miracast receiver device, after finding the device, select the device you want to connect, turn on the monitor and switch the monitor input source correctly after establishing the connection, and it can be used normally.

In daily life, many people like to cast their mobile phones to computers, either because the mobile phone screen is too small, or because they want to live broadcast by projecting the mobile phone to the computer. So what method do you use to cast the screen?

Using the projection software, the computer next Total Control, data cable or wireless network connection to the computer and mobile phone, open Total Control, you can see the mobile phone screen projection to the computer display, and then you can also control the mobile phone through the computer.