How to fertilize the rubber tree and what fertilizer to use for the rubber tree

Fertilization of rubber trees: Due to the rapid growth, nutrients should be replenished in time to make the plants vigorous.

Long. Nitrogen-based fertilizers should be applied 2 to 3 times a month.

Rubber tree in the growth period, especially in the summer of fertilizer and water demand is very large, so in the growth period need to be fertilized frequently, fertilization can be applied 10 times of the rotting cake fertilizer water mixed with the same amount of 500 times potassium dihydrogen phosphate liquid fertilizer, fertilization times every 20 days in spring and autumn, fertilizer every 15 days in summer. In autumn, gradually reduce the frequency of fertilization and watering to promote plant growth and fullness, which is conducive to overwintering.

The type with colored markings is born.

The growth is relatively slow, which can reduce the number of fertilization, and at the same time increase the application of phosphorus and potassium fertilizer to make the foliar .

The brindles are brightly colored. If too much or simply nitrogen fertilizer is applied, the color of the markings will become lighter or even disappear. In September, nitrogen fertilizer should be stopped, and only phosphorus and potassium fertilizer should be applied to improve the cold resistance of plants. In winter, the plant is dormant and fertilization should be stopped.

Potted oak trees should generally be repotted once a year before the new shoots grow. When turning the pot, cut off the curly root system appropriately, and add new culture soil and base fertilizer.

Oh, my rubber tree is what I made:

Watering - the water should be thoroughly communicated at one time, do not water every day, and do not accumulate water.

Fertilization - depending on the kind of fertilizer you buy, it is water-soluble or the description says that it can be mixed directly into the soil.

The rubber tree is very easy to maintain, don't be too nervous, but my rubber tree likes the sun very much, and there are times when it is sunburning.

It will continue to grow new leaves, and its vitality is very vigorous.

Rubber trees don't grow? It's the fertilization that isn't in place, teach you the correct fertilization method.

Rubber tree fertilization is mainly nitrogen fertilizer, supplemented by phosphorus and potassium fertilizer.

1. To fertilize rubber trees, it is necessary to control the concentration and frequency of fertilization, and not to apply excessive fertilizer or too high fertilizer concentration, otherwise the growth will be affected, and it will also cause the phenomenon of overgrowth and affect the ornamental value of the plant.

2. The growth of rubber trees is generally caused by excessive nitrogen fertilizer, so fertilization can be done as much as possible to apply fertilizer with low nitrogen content, and generally fertilization adds an appropriate amount of phosphorus and potassium fertilizer or organic fertilizer, which may control the growth of plants, and the growth of plants is also relatively vigorous.

3. In early spring, it is the germination period of the rubber tree, and it is necessary to change the pot and soil to ensure that the soil is fertile, and it is necessary to change the soil, and add an appropriate amount of cake fertilizer and livestock manure to the soil as the base fertilizer to maintain the nutrition of the soil. It is recommended to fertilize once every 3 weeks, and choose 1000-1500 times the solution of "special foliar fertilizer for fertile leaf flower seedlings".

4. In the growth period of rubber trees, that is, in summer, the demand for nutrients is large, and it is necessary to appropriately increase the frequency and amount of fertilization.

5. In winter after the end of autumn, it is necessary to apply some phosphorus and potassium fertilizer to improve the ability to resist cold, and it needs to be moved indoors in time for maintenance to prepare for a smooth winter.

6. Rubber tree is a fertilizer-loving plant, and at the seedling stage, apply 1 rotted liquid fertilizer every 20 days; After forming, fertilizer should be applied every 2 months, and watering should be done in time after fertilization.

My rubber tree does not grow in September, and between June and August, the hottest time is fast. So I'm not going to fertilize now, I'm going to do it next spring. If it's cold in winter, you have to put it indoors, otherwise you'll freeze to death.

Can the rubber tree I just bought back be repotted, my family only has compound fertilizer and cake fertilizer, can it work?

Went to buy fertilizer. Fertilizer is mainly nitrogen-based, and when buying fertilizer, there are labels on it, and the content of nitrogen, phosphorus and potassium on the label is the main content. Choose a fertilizer with high nitrogen content, which is a good nitrogen-based fertilizer.

The nitrogen content is high and the elements are not missing, so that it does not lack other elements and grow slowly, or the yellow leaves fall off. The nitrogen element obtained is more, the branches and leaves grow quickly, and the leaves grow hypertrophic. This fertilizer is a chemical fertilizer that does not have any flavor and is very good for watering.

As long as it grows, it can grow very quickly by supplementing it with fertilizer two to three times a month on a regular basis.

At the seedling stage of the rubber tree, it is necessary to pluck the topping to control the height at about 70 cm, and apply the rotten liquid fertilizer every 20 days, so that the rubber tree will be more beautiful.

After molding, you only need to apply fertilizer every two months, and remember to water it in time after fertilization. In order to ensure its good growth, nitrogen fertilizer should be supplemented in time to promote the nutrients required for its growth, in order not to affect its ornamental value, fertilization only needs a small amount of nitrogen fertilizer with low concentration, which can avoid the occurrence of growth.

There are two options when it comes to fertilization. In spring and autumn, we mix compound fertilizer with organic fertilizer and use it together.

Fertilizer ** is relatively cheap, and the growth is better, all kinds of elements can be supplemented, you can use a little slow-release fertilizer in summer, because the fertilizer effect of slow-release fertilizer is relatively long. Three times a year, the rubber tree has enough nutrients to support its growth. This scheme is more convenient.

If we don't have these fertilizers at home, we can use a lot of elemental fertilizers. Flush once every three months. Then every month we are using a universal nutrient solution, which can be irrigated with water.

In order to ensure that the soil is fertile, it is best to apply an appropriate amount of rotted organic fertilizer to the bottom, and you can also add an appropriate amount of rotted cake fertilizer, livestock manure, etc. as the base fertilizer, so as to improve the soil and ensure the sufficiency of nutrients. Fertilize the rubber tree every three weeks with a low concentration of liquid fertilizer or special flower fertilizer, which can make the rubber tree grow more robustly.

Summer is the growth period of rubber trees, the demand for nutrients is large, it is necessary to appropriately increase the frequency and amount of fertilization, apply the use of rotted cake fertilizer once every half a month, and you can also use nitrogen, phosphorus and potassium balanced fast-acting compound fertilizer, which can balance nutrition and ensure good growth needs.

If it doesn't cost money, you can ferment it directly with bean cake. The fermented soybean cake fertilizer water is very conducive to its long leaves.

Because the soybean cake is a good nitrogen-based fertilizer after fermentation, use it to irrigate, the rubber tree will continue to grow leaves, continue to grow branches, and the leaves will grow large and thick.

However, the fermented soybean cake fertilizer water has a slight smell, so it is not recommended to use it if you raise it indoors. If you are raising flowers outdoors, you can go and water them, this fertilizer does not burn the flowers, and the flowers grow very quickly.

Generally, after watering, in the case of good ventilation, about two hours, the taste is gone. Of course, you can also dilute the fermented fertilizer water with water before watering, and then put a few orange peels and soak it, which can reduce its smell, but it will have a slightly sour taste.

After raising any flower and planting it in a pot, the potting soil is limited, and the root system will continue to fill the entire potting soil in the process of continuous growth. Therefore, to raise rubber trees, you only need to choose a nitrogen-based fertilizer. Soybean cake fertilizer or buy ready-made chemical fertilizers, according to your own situation to choose.

It is better to use Hefei for rubber trees in this season.

Compound fertilizer has the advantages of high nutrient content, few side components and good physical properties, which is suitable for balanced fertilization, improves fertilizer utilization rate, and is effective and promotes the rapid growth of rubber trees. When applying fertilizer, it should be carried out according to the amount used to prevent excessive fertilizer damage.

Because it is a foliage plant, you can use nitrogen-containing fertilizer, and you can buy this at the flower market.

In the growth process of rubber throughout the year, the fertilization frequency is different, in the spring mainly in the pot to add an appropriate amount of well-decomposed organic fertilizer solution, during the summer growth period every 1 month to add two thin nitrogen fertilizer solution, autumn every 45 days or so to apply a thin nitrogen fertilizer solution, winter to stop fertilization.

Spring is the season when the earth is full of life, and the rubber tree grows vigorously in spring, as the germination period of the rubber tree, it is best to apply an appropriate amount of rotted organic fertilizer solution at the bottom before entering the pot, and you can also add a small amount of cake fertilizer solution appropriately to promote the growth and development of the roots.

Rubber trees like to grow in nutrient-rich soil, so how to fertilize the rubber tree is the best, during the summer growth period, to add two thin nitrogen fertilizer solutions every 1 month, and often spray thin fertilizer water solution to the leaves in the high temperature season to ensure sufficient nutrients.

In autumn, rubber trees should appropriately reduce the number of fertilization, remember not to be too thick or excessive, in order to avoid burning the plant, resulting in root rot, it is best to apply nitrogen fertilizer solution every 45 days or so, and do not water too much, keep the potting soil dry best.

Since the rubber tree is a tropical plant, after applying an appropriate amount of nitrogen fertilizer solution before entering the winter, there is no need to fertilize, because it is the dormant period of the rubber tree at this time, the growth rate is very slow, and the need for fertilizer is not very high, as long as the potting soil is kept dry and the air circulation is strengthened.

Rubber trees grow in warm, sunny areas, which allow them to be exposed to normal light and promote water transpiration. In spring and autumn, the weather is warmer, the intensity of sunlight is just right, at this time it is best to put it in the sun to grow, in winter, to ensure its normal demand temperature, at this time the lack of light, rubber trees can still grow in the lack of light indoors.

The growth of rubber trees in summer is very vigorous, so in the middle of summer is the time when rubber trees grow rapidly, at this time the demand for water and nutrients will increase, so we have to increase the number of fertilization, the use of humus cake soaked into water, and then mixed with phosphorus and potassium elements of liquid fertilizer to apply, fertilization in spring and autumn is generally carried out every 3 weeks, and in summer it can be shortened to two weeks. Fertilization is done in conjunction with watering, which makes the rubber tree grow healthier and stronger.

Early spring budding period When the rubber tree comes in early spring every year, pour out the soil in the pot and replace it to ensure the nutrient content of the potting soil. At this point, the roots can be pruned and the new soil can be selected for potting. If the rubber tree grows relatively large, it is necessary to choose a larger pot, which can be conducive to normal growth.

If you want the potted rubber tree to grow fuller, you can pluck the top when the seedlings are growing and control the height to about 70 cm, which will make the planted rubber tree more beautiful.

One of the effects of the rubber tree is to watch the leaves, so the fertilizer is mainly to promote the growth of its branches and leaves, so what fertilizer is good for the rubber tree? Mainly nitrogen fertilizer, in addition to the need to supplement phosphorus and potassium fertilizer, trace element fertilizer, etc., in the pot will be used in the bottom fertilizer, the growth process is mainly rotted organic fertilizer, must not smile ears can be applied to fertilizer or fertilizer with too high concentration.

1. When budding in spring, apply basal fertilizer.

In the spring, the rubber tree will sprout a large number of buds, and then enter the vigorous growth period, so before germination we should help it repot, and then add some bottom fertilizer to the blind land soil, the bottom fertilizer can be cake fertilizer, bone meal, livestock manure, organic fertilizer, etc., the amount is about one-tenth of the soil, which can improve the fertilizer efficiency of the soil.

2. During the summer growth period, nitrogen fertilizer is the main fertilizer.

In the summer, the rubber tree will enter the more vigorous growth period, how to fertilize the rubber tree at this time? In order to keep it growing faster, it needs to be fertilized 1-2 times a month, generally with nitrogen fertilizer as the main fertilizer, supplemented by phosphorus and potassium fertilizer, of which nitrogen fertilizer can make the leaves more shiny and the leaves more hypertrophied, if lacking may cause the leaves of the rubber tree to droop.

3. During the dormant period in winter, stop fertilization.

In winter, fertilization is relatively simple, that is, stop fertilization, because the low temperature in winter is low, the rubber tree will enter the dormant branches, its growth will basically stop, fertilization is easy to cause excess nutrients in the soil, but will affect the development of roots, some flower friends in winter temperature will also be above 10 degrees, then you can apply some thin fertilizer water each.

The rubber tree, also known as the rubber tree, is the source of natural rubber, with a thick trunk and fat leaves, which can be both ornamental and usable. To raise the rubber tree well, it is necessary to provide it with suitable fertilizer, what fertilizer should the rubber tree apply well? This depends on the growing season and variety, and the specific season to apply what fertilizer, you can refer to the following introduction.

Rubber tree is a foliage plant, the height of the plant and the degree of beauty can be controlled by fertility, what fertilizer is good for the rubber tree, the right fertilizer can grow well, and the leaf markings are beautiful. For general varieties of rubber trees, it is advisable to fertilize 2 or 3 times a month during the growth period, mainly nitrogen fertilizer; The growth of varieties with color markings is relatively slow, so the number of nitrogen fertilizer application can be reduced, and phosphorus and potassium fertilizer can be added to increase the foliar color.

After September, no matter what varieties should be stopped, to improve the cold resistance of the plant to prepare for winter, this period to apply phosphorus and potassium fertilizer; When the growth stops in the winter, there is no need to fertilize. Fertilization is generally carried out at the same time as watering, so it is necessary to water after fertilization, and the fertilization should not be too close to the roots of the plant to avoid burning the roots.

1. Temperature and light

The suitable temperature for rubber trees is 20 25, and above 25, the growth rate will be slower; Light is also conducive to regulating temperature, rubber trees should be placed in a well-lit place when breeding, and can accept the temperature in the morning and evening of spring, autumn and winter; In summer, put it in a semi-shaded location and must not be exposed to the sun.

2. Watering and fertilizing

The fertilization method of rubber trees is described above, and the watering is mainly explained here. Rubber trees like moist soil, so keep the potting soil moist when breeding, don't water too much, and be careful of root rot caused by standing water.

3. Pruning and insect control

Rubber trees are ornamental plants, so they need to be pruned to make them more beautiful. In addition, pruning can cut out the pest infested area. Rubber trees are susceptible to anthracnose, gray spot and root-knot nematode disease. Pruning diseased leaves in a timely manner can prevent the spread of insect infestation.

1. Purify the air

Rubber tree is a natural rubber **, which can be used to make rubber products; Indoor cultivation of rubber trees can absorb formaldehyde, carbon monoxide, carbon dioxide and other harmful gases, so carbon dioxide has the ability to purify the air.

2. Ornamental value

The leaves of the rubber tree are large, beautiful and shiny, the top bud is red like the sunset, and the leaves are cracked like the red tassels that hang down, which is very beautiful and has a high ornamental value. Large rubber trees are mainly planted next to buildings, in flower beds and in the green belt of roads; Small rubber trees can be used for living room decoration.