What kind of squeegee looks better to glue by yourself?

In daily life, the application of sealant is very common, in the construction process, how to make a sealant with a bright surface, uniform thickness and good sealing? If you want a good construction effect, in addition to purchasing a good sealant, you must also have the correct gluing tools and construction process.

1. Gluing tools.

1. The glue gun is an indispensable tool in the glue process. Load the sealant from the cut nozzle into the applicator and push the handle to the bottom of the sealant to fix it.

2. Masking paper has a variety of thicknesses, suitable for different use occasions, and can be found in stationery stores or hardware stores. In the preparation stage for gluing, use masking to leave a distance between the final strips, and immediately after gluing and scraping the surface, tear off the masking paper. Using masking paper will not only help you create the right width, but also protect the surrounding substrate.

3. Cut the glue nozzle obliquely, so that the glue nozzle forms an inclined surface outlet that is basically consistent with the gluing width.

4. The scraper has a variety of different angles, such as right angle, outer round, inner fillet, bevel and so on. Choose the shape of the bead you want, and use the scraper blade to scrape off any excess sealant at the end of the glue application to create a smooth, shiny surface.

These are the most basic gluing tools. Of course, you can also use brushes, detergents, foam sticks and other tools for different use environments.

Second, the construction process.

1.How should the surface of the substrate be treated before sealing?

The area of the substrate that the sealant comes into contact with must be kept clean and dry free of dust, dirt, rust, grease and other contaminants. Non-porous substrates must be cleaned with a clean white lint-free cotton cloth and solvent. Wipe off the residual solvent with a clean, dry cloth as soon as possible before it evaporates.

Before applying the glue, cut the nozzle of the cartridge, then attach the nozzle and cut the nozzle to the desired size. Sealants can be applied in dots or layers and require exposure to moisture in the air to cure.

2.What should I pay attention to when applying sizing?

Make sure the depth of the sealant is not greater than the width. If there is a large gap between the two substrates, the insert will need to be inserted to improve the performance of the sealant. Use the appropriate tools to smooth the sealant and make the surface more beautiful; At the same time, the sealant is pressed into the bonding surface, helping to eliminate cavitation or voids in the bonding layer.

You can choose Saihiro's squeegee. In the past, I used to press the glue with my fingers after gluing, which made it dirty, but now it is very convenient to use this, one-time molding, and it is also very beautiful.

Novices need a certain amount of skill and experience to learn gluing. Here are some tips to help you learn how to glue quickly:1

Learn the basics: understand the types, properties, and uses of glue. Learn about the characteristics of different types of glues and how well they bond to different materials.

2.Preparation: Prepare the glue, glue gun, glue stick, and other tools you need.

3.Safety first: Make sure to wear gloves and glasses during operation to prevent glue from spilling onto ** or eyes.

4.Accurate measurement: according to the needs of the work, put an appropriate amount of glue stick in the glue gun, and melt it by heating the glue stick.

How fast is it for novices to learn to glue.

Novices need a certain amount of skill and experience to learn gluing. Here are some tips to help you quickly learn how to glue:1

Learn the basics: understand the types, properties, and uses of glue. Learn about the characteristics of different types of glues and how well they bond to different materials.

2.Preparation: Prepare the glue, glue guns, glue sticks, and other tools you need.

3.Safety first: Make sure to wear gloves and glasses during operation to prevent glue from spilling onto ** or eyes.

4.Accurate measurement: according to the needs of the work, put an appropriate amount of glue stick in the glue gun, and melt it by heating the glue stick.

5.Technique Practice: Practice the peel on a piece of scrap material, try different glue application and joining methods to improve your grip and grasp the bonding time.

6.Adjust the temperature: Applicators often have different temperature adjustment options, adjusting the temperature to suit different types of glue and job needs.

7.Choose the right glue: When choosing a glue, choose the right glue according to the type of material to be bonded and the needs of the job.

8.Accurate positioning: Before applying the glue, make sure that the materials to be attached are in the right position and that they are secured by clamps or other means.

9.Skillful operation: Apply the glue quickly and evenly to the parts that need to be joined, using the glue gun to control the flow of glue.

11.Cleaning work: After the gluing is completed, clean up the glue stains on the glue gun and the excess glue on the surface of the material.

12.Experience: Keep practicing and accumulating experience to learn how to glue faster and more accurately.

Try the following:

Wipe with wind oil.

Apply hand cream to the glue area (apply a little more) and after a few minutes, then rinse with water.

Apply dish soap to the glue and cover it with plastic wrap and wipe it off in about 10 minutes.

Wipe with nail polish remover where there is glue.

1. Marble glue composition: the main components are unsaturated resin and peroxide compounds, and the performance of water, dilute acid and dilute alkali is good, but the performance of marble glue is poor in organic solvent resistance. Therefore, you can use alcohol or special stone care repellent to wipe or cooperate with a sander to remove marble glue.

2. Cleaning: After removing the glue on the marble, the surface of the marble should be cleaned immediately, and soft water should be used to clean it as much as possible to avoid stains from damaging the surface of the marble again.

3. Drying treatment: After treating the marble surface with clean water, use a high-power dryer and water suction machine to clean up the moisture on the marble surface as soon as possible, this step is very important, so as to avoid water stains from penetrating into the stone and causing secondary pollution.

Identify the quality of the glue and distinguish the authenticity of the glue.

1) It is to the laboratory for testing, there are these indicators: the % rate of chemical composition, oxidation time, adhesion force and deformation;

Second, it is visual inspection, and there are several methods:

1. Use a quiet grinding glue gun to beat the colloid, and see the uniformity of the glue and jujube, the higher the better;

2. When the glue is beaten, look at the luster of the glue, and the good one is crystal luster;

3. Good glue is free of impurities and bubbles;

4. Dip the glue with your hands, slowly pull outward, the longer the pull, the better, the general good glue is more than 50 centimeters to accompany the removal of rice.