How do you turn off the water inlet switch of the electric water heater?

If you bought a new electric water heater at home.

If you want to install it yourself, you can turn the inlet valve under the electric water heater to the right 90 degrees to close, but the hose and pressure relief valve have been removed, so that the water storage inside the water heater can flow out naturally (it takes about a few minutes), and the old water heater can be removed after the water is gone, and the new one can be replaced.

First unplug the power plug, and then close the inlet and outlet angle valves of the two water distribution pipes of the electric water heater. If possible, you can remove the two water distribution pipes, so that you can rest assured.

There should be a valve for the inlet water of the electric water heater, which is designed and installed on the inlet pipeline by the user when installing the electric water heater, for maintenance and malfunction. Is this valve installed in your electric water heater inlet? You look for it on the inlet pipe of the electric water heater, and if you have this valve, you will close it, if not, you can only close the main valve of the tap water in your house.

Press a water supply valve when changing to a new electric water heater.

The inlet switch of the electric water heater is actually similar to the ordinary valve, if it is a spherical room, the handle and the pipe are perpendicular to the direction of closing, and if it is a handwheel clockwise direction is closed.

Turn off the switch between this switch and it should be inside the sink in the kitchen.

Specifically, it is ** water leakage, it is best to take photos and upload them, so as to provide you with an accurate answer.

The inlet valve of the electric water heater is twisted to the left.

Generally, the faucet (including the gas cut-off door) is turned on to the left, that is, it is turned on counterclockwise, turned off when it is screwed to the right, and closed clockwise. This is mainly for safety reasons, because when people are in a hurry, they will generally turn the switch right, so that the water will be turned off and there will be no danger.

Although the volume of ordinary quick-heating electric water heater and dual-mode electric water heater is about the same, the internal structure is very different, and the quick-heating electric water heater is only smaller in volume and more powerful than the storage electric water heater, so the heating speed is indeed faster than that of the storage electric water heater.

However, it can not achieve instant heating in spring and autumn, and it needs to be preheated, that is, it needs to wait, while the dual-mode electric water heater can be used in the three seasons of spring, summer and autumn, and it can be heated when it is turned on.

The main water inlet switch is at the outlet of the water inlet pipe and usually opens to the left and closes to the right. After the water heater is plugged in and used, it does not need to be turned off under normal circumstances. Of course, it depends on the model and brand of the water heater, each product has its own characteristics, you can read the manual more when using it.

1. Generally, the total water inlet switch is in the outlet area of the water inlet pipe, which is usually open to the left and closed to the right. After the water heater is plugged in and used, it does not need to be turned off under normal circumstances, of course, it is not absolute, it depends on the model and brand of the water heater, each product has its own characteristics, you can refer to the manual when using. 2. The switch direction of the mixing valve of the general water heater is hot water on the left side and cold water on the right side by default, but this involves the specific model.

The best way is to judge according to the size of the hot water flow, the direction of the large water flow is cold, the direction of the small hot water flow is hot, and generally the red water is hot. What to pay attention to when using a water heater 1. For the installation of this type of product, do not do it yourself, but should let a professional teacher help. In addition, the installation location should be a place with good ventilation performance, and the smoke pipe should be extended to the outside to facilitate waste discharge.

Of course, if you are home alone, it is better not to take a bath, so that no one will know when the danger will occur, and the bath should not be too long to avoid poisoning. 2. It is recommended to close the valve immediately after use to avoid leakage. If smoke or air leakage is found during use, stop using it immediately and notify the maintenance personnel to come to the repair.

In addition, the pipes and valves of the water heater need to be checked regularly. If the service life is too long or aging, it should be replaced immediately. Of course, if you feel dizzy while bathing, it is advisable to stop bathing immediately, close the valves, and open the windows for ventilation.

Although the volume of ordinary quick-heating electric water heater and dual-mode electric water heater is about the same, the internal structure is very different, and the quick-heating electric water heater is only smaller in volume and more powerful than the storage electric water heater, so it is indeed faster than the storage electric water heater in terms of heating speed, but it can not achieve instant heating in spring and autumn, and it needs to be preheated, that is, it needs to wait, and the dual-mode electric water heater can be used in the three seasons of spring, summer and autumn.

The hot water outlet valve of the electric water heater can be closed, but the water supply valve (water inlet) cannot be closed, and it must be ensured that the cold water will automatically enter the water heater tank after the valve is opened to flow water.

When the outlet valve is closed, the water heater cannot be used because the water inside cannot flow. It will not cause dry boiling, and there is water in the water heater cavity.

After you turn off the hot water, you don't have to go to the hot water, it won't dry boil, the general water heater is automatic temperature control, you turn off the hot water, the cold water can still be used, if you want to use hot water, you have to turn it on, as you said, close the water outlet, the water inlet will fill the water heater with enough water, naturally it will not enter the water, if you want to use hot water, turn on the power supply, open the hot water outlet, continue to use hot water, it's that simple, understand? It should be noted that no matter whether you turn off the cold water or hot water in the water heater, there is always cold water coming out of the flower wine, which has nothing to do with the water heater. Do you understand?

It can be turned off, but the water supply valve (water inlet) cannot be closed, and it must be ensured that the cold water will automatically enter the water heater tank after you open the valve to flow water

Closing the outlet valve will not affect the incoming water and will not cause dry boiling.

Change the faucet and solve the problem!

Everything else is puffy clouds!

The inlet valve of the electric water heater is opened counterclockwise and closed clockwise. Hot water on the left, cold water on the right, hot water in red, cold water in blue, twisted handles, open on the left, closed on the right side of the rent. Do not move the inlet valve of the electric water heater or open and close it freely during use.

Because the inlet valve of the electric hot water pin type pin will be prone to uneven water heating and cold.

Want. Since the gas water heater is controlled by the hot water faucet, the linkage valve is the pressure in the water inlet pipe under the state of not using water, but this pressure stove will never cause damage to the control part, taking into account the influence of this pressure in the design, and it is not required to close the inlet valve when not in use, but from the purpose of safety and prevention of water leakage accidents, turning off the inlet valve is a good practice in use.

How to close the water inlet of the water heater

If you want to close the water inlet, the faucet is generally turned on to the left, that is, it is open counterclockwise, turned off when it is screwed to the right, and it is closed clockwise. This is mainly for safety reasons, because some people will generally turn the switch to the right when they are in a hurry, so that the water will be turned off and there will be no danger.

1. When using the water heater, the hose of the water heater is generally made of rubber, so it will be safer to replace the hose made of rubber material every two years or so, so as to avoid the phenomenon of pipeline leakage and poisoning caused by breakage.

2. In the process of use, generally do not exceed the service life, because there are some gas water heaters, if the service life is exceeded, there are likely to be certain safety hazards, such as gas leakage or fire failure and other problems.

3. Usually pay attention to good ventilation, especially the gas water heater must not hang some items on the exhaust port, otherwise the atmosphere can not circulate smoothly, especially do not hang towels or rags and other flammable items.

4. If no one in the home does not use the water heater for a long time, the water heater must be powered off, and then the gas valve is closed, and then the water in the water heater is emptied, so as to avoid the problem of embroidery or corrosion of the inner tank caused by the water staying in the inner tank for too long, which will affect the service life of the water heater.