What to do if the scratches of the vehicle are dented, what to do if the surface of the car is dente

Sandpaper sanding to repair. Its practical sandpaper sanding is also able to remove minor scratches from the car. You only need to prepare a piece of sandpaper, clean and dry the scratched area of the car first, and then use sandpaper dipped in water to gently rub the scratched area.

What I want to say here is that we must pay attention to the strength of friction and do not rub for too long, otherwise it will backfire, and the inner iron sheet of the car will be broken if rubbed out.

Chilled Coke to fix. Some friends think that the scratches are small and don't want to go to the auto shop to repair them, but if they don't get it, they can't accept it. At this time, you can buy a bottle of Coke, pour a little bit on the rag, and keep wiping the scratches.

After rubbing it a few more times, you will find that the scratch marks have gradually become lighter, and it is difficult to see them again. And so on, so that a few more rubs will be more effective. The cost of going to the 4S store to repair the paint is really high, but everyone can afford Coke, and the ones that you can't drink by yourself are just in the right place.

Traceless repair is actually micro sheet metal, the principle is actually very simple, is based on optics, mechanics, the use of lever principle from the inside of the pits of different depths to slowly restore to the original appearance, the repair effect depends on the master's technical level, if the technology is strong, there is no problem from the front, for the individual the benefit is that the traceless repair does not need to destroy the original car paint. Hope, thank you!

According to the landlord's problem, this situation is still handled by insurance in time, which not only requires sheet metal treatment, but also needs to be repainted, such as satisfaction.

In general, do a sheet metal treatment.

Hello, the current number of people consulted may not reply in a timely manner, if it is a vehicle failure problem, it is recommended to use the computer to detect the specific cause of the failure, search for "car master" can consult car problems at any time, 24 hours ** answer.

Summary. Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions!

The car has dents and scratches, and a pair of paint is about 350.

1.For example, if there is only one door dent, if you repair the door and add painting, the total cost is about 350 yuan.

2.If there are more scratches. It is calculated according to a pair of lacquer, 350. For example, the door, fenders, and front bumper, all three of which have scratches, are three pairs of paint, and the cost is 1050 yuan.

3.If the door is more seriously dented, the door assembly should be replaced. Replace and then paint.

The car has dents and scratches, judge how much it will cost to repair.

Hello, don't worry, I can ask for your question, but wait a minute, I need text for about 2 minutes.

You are pure bending, I am your exclusive technician, attentive, careful, concentrate on answering your car questions, for you to find the corresponding problem solutions and solutions! The car has dents and scratches, and a pair of paint is about 350. 1.

For example, if there is only one door dent, if you repair the door and add painting, the total cost is about 350 yuan. 2.If there are more scratches.

It is calculated according to a pair of lacquer, 350. For example, the door, fenders, front bar, these three places have scratches, that is, three pairs of paint, the cost of 1050 yuan 3If the door dent is more serious, you have to change the door assembly.

**Both doors have scratches and need to be sprayed on both doors. It costs 700 bucks.

You can't use cheap car paint for spray painting, otherwise the car paint will turn yellow after a long time.

There's also a depression there on the right, how much does it cost.

As long as it's a dent in the door. You won't be charged more. Spray a door about 350.

If the body is depressed and painted, it is recommended to paint sheet metal, about 300 to 500, but if there is no paint off and you are very concerned about the original paint, you can try the paint-free car dent repair technology, no need to destroy the original car paint for body concave repair, the principle is actually very simple, it is based on optics and mechanics, and the use of the lever principle to slowly restore the pits of different depths to the original appearance, look at the following picture You can see it at a glance.

The specific size of your depression can be determined, similar to the picture in the picture, generally about 300 yuan can be done.

The picture below is the repair effect of our sharkskin car dent repair direct store**, the first one**The black border area on the left is the appearance of the original painted body, and the right is the appearance of the body after repair, how can you feel the specific effect, but after all, there are so many stores in the country that the car dent repair can not be generalized, so I recommend that you still go to the regular brand store to repair, so that the technical level will be *** and**fixed, unlike small shops, which will only shout prices all over the sky.

What to do if the car is dented? Teach you a trick to easily fix it with a simple tool, it's too cost-effective.

Hello, the body has scratches, deformation, etc., need to be re-painted sheet metal repair, if it is caused by the accident caused by the deformation can be reported to the insurance company for compensation.

It depends on the location, if it is the cover that appears, it can be sucked out. If it's a hub or something, you can fix it.

If the surface of the car is dented and the paint is not damaged, then you can use non-marking sheet metal repair equipment to restore it! If it is damaged, then it can only be ordinary sheet metal painting.

Hello, if the depression is very small and there is no exposed primer, it is generally not necessary, if the area is large, it must be sheet metal painting.

If there is a dent in the surface of the car, it is necessary to have a sheet metal paint shop for shaping, and then the sheet metal painting is used to repair it.

1.No damage to the paint. The dent repair will not damage the car paint, so that the original paint can be retained, and the process of post-painting is impossible to be better than the original paint, which is absolute. If the car is sold in the future, the retention of the original paint is also a weight to increase the value of the vehicle itself.

2.The time is short. It takes about 30 minutes to repair a pit, depending on the location and area of the pit. At such a speed, the sheet metal spray paint is simply low.

3.Save money. After comparison and summary, the repair of the depression of the same model is one-third of the first sheet metal painting of the 4S shop, but the specific cost also depends on the difficulty of repair.

If the surface of the car is concave, you generally need to go to the factory for sheet metal painting, depending on how large your area is.

Hello, if there is a depression on the surface of the car, you can treat it with sheet metal painting, and you can basically not see it after treatment.

Generally speaking, if the surface of the car is dented, you can go to his repair shop to have the sheet metal treatment.

If the surface of the car is dented, you can do sheet metal painting to repair it, and you can go to a sheet metal shop.

Hello, now there is a stretching technique, which can be pulled out directly, but small depressions are not OK, and they must be sheet metal to be treated.

I've heard that small depressions can be scalded with hot water, but I don't know if there is such a solution.

Hello, if this is dented, it is recommended to treat some sheet metal spray paint, just about 300 yuan on a side.

You can go to the car repair shop to go to the sheet metal adjustment.

In that case, it is better to go to a professional place and find a professional person to get it for you.

If the car is scratched and the paint is peeling, it is recommended to paint the body. However, if the paint does not fall off, and the original paint of the car is injected, you can try the paint-free car dent repair technology. The repair of the concave does not require the destruction of the original paint.

The scratch treatment of the car depends on the scratch area, scratch depth, and whether the deformation is serious. If the scratch area is small, the scratch depth is shallow, and the deformation is not serious, you can deal with the scratches on the car by yourself.

First of all, we can treat scratches on the body with some everyday items, such as toothpaste. We can apply toothpaste to a damp towel and wipe the scratches repeatedly. Slight scratches will be wiped off as you rub them slowly.

After repeated wipings, the vehicle can be dried again. Nail polish can also be used to repair scratches in this section. You can choose a nail polish similar to the color of the body car, apply it to the scratches on the body, and remember to air dry it after applying.

In addition, car wax is also a good choice.

At the same time, if the deformation of the body is not serious, it can be repaired by itself. For example, if you use a dent repair device, you should first apply hot melt adhesive to the gasket, then glue the gasket to the dented area, then put the glove into the screw of the gasket, and then turn the nut so that it slowly recess back. If the dent repair is complete, we will use a scraper to remove the liner, taking care not to scratch the body.

If the depression is too large, we can repeat it several times until the depression is pulled back.

If the scratches on the body damage the primer, or if the deformation is too severe, it is recommended to find a professional to repair it.

Millions of car purchase subsidies.

1. Turn the hair dryer to the hot air gear, blow the part of the car dent with the tuyere, here it should be noted that the distance is not too close, the close will make the car paint melt due to high temperature, and it can not be too far, far away to achieve the effect of repair, the distance is best in 15 cm.

2. Immediately after the hair dryer blows, use the prepared beam collapse shield to cover the slag digging dents, and it is best to choose aluminum foil here, because the heat insulation of aluminum foil is very good, so that the dents can be insulated to the greatest extent.

3. The next thing is to put the dry ice on the aluminum foil, here Ziyuan must wear heavy gloves in order to prevent being burned, and it is best to use a bracket to clamp the dry ice and put it on the aluminum foil.

4. If the dent is very small after letting go of the dry ice, you don't need to move back and forth, if the dent is relatively large, you need to move the dry ice back and forth to make the hand cold evenly at the dent.

5. After a period of time, if you hear the sound of metal, it indicates that the car dent is returning to its original state, which is the principle of thermal expansion and cold contraction, and the huge gap between high temperature and low temperature will deform the car metal, thereby restoring the dent.

Sometimes the effect of repair is not very obvious if the dent is relatively large, don't worry, at this time, the heating and cooling process should be repeated, and the recovery effect will be obvious after many times.