How to deal with scratches and dents in a new car? Should the new car be repaired immediately if it

If it's a bumper.

It is recessed, easy to solve, and the bumper is removed at the maintenance point, and it is restored as soon as it is heated from the reverse side; If it is a metal piece such as a door, the concave is relatively smooth, and the depression can be repaired; Depressions like ** can be repaired without sheet metal. If the concave is not smooth, there is only sheet metal.

Presumably, many car lovers are most worried that the car will be scratched accidentally, and then there will be some traces, which will not only affect the beauty of the car, but also feel bad after reading it. But some are only a small scratch, and if you go to car insurance, it is obviously a big fuss, and you will not spend money to repair it at a car beauty shop. But what to do?

I would like to share a little trick with you, so that you can spend money on repairs without going to the repair shop, and you can easily solve the problem, and it is also very cheap.

The first point is to apply toothpaste, which can temporarily prevent rust. Gently rub the toothpaste in a circular and apply it to the scratches. If you have to remember to apply it after rain or after washing your car, this will generally reduce scratch marks, and it can also simply play an insulating role to prevent rust, which is no problem in the short term.

In particular, the effect is most pronounced in white paint.

The second point is to use car mixtures, which are sold by car beauty factories, and I really don't know how to buy them online. However, remember to buy a mixture of two different thicknesses. Wipe the body with a coarser mixture first, and then wipe it again with a finer mixture to reduce the visibility of the scratches, both of which are indispensable.

Wiping with a car mixture is a simple and convenient option.

If the scratch is deep, first observe whether the metal surface is exposed, and if you can't see the metal surface, it will not rust, so you can concentrate on applying the retouching paint. Use sandpaper to the scar, do not enlarge the scar surface casually, and it is important to remove the dirt. The putty should be carefully applied so that it completely enters the interior.

Finally, the mixture is applied, waxed and the work is finished.

Dentage treatment is one of the most troublesome work in body maintenance, the important thing is to lay a good foundation, if this step is not done well, no matter how good the painting is, the effect will not be good. When spraying paint, don't forget to cover the surroundings with newspaper so that the paint does not spread around.

When rust is found, it should be wiped clean with sandpaper or a chemical synthetic agent that changes the rust spot. It is used separately depending on the situation. The bruise of the bumper is treated by shaving off the burrs and smoothing out the potholes with putty.

Dedicated putty, prepare a variety of colors, choose the closest color. For bumpers that are the same color as the body, painting is important.

However, the above method is only suitable for some particularly light scratches, if your car is more severely scratched, then you can only go to the repair shop to repair it. If there is any other good way, please leave a message to discuss.

If it is already dented, it can only be repaired by sheet metal painting. In the case of sheet metal painting repair, the price will vary depending on the area and location of the depression. In addition, the 4S shop is definitely much more expensive than the roadside auto repair shop, if you have a car beauty shop you know, it is recommended to go to the car beauty shop to repair.

Because it is a new car, the insurance must be the first year, and it is recommended to take insurance, which affects the insurance rate very little. Since you can't see the actual car, you can't make an accurate judgment, so it is recommended to consult first. In order to save money, some car owners go online to buy some repair tools to operate by themselves, which is not recommended.

Because if you deal with it yourself, once the repair fails, it will cause secondary damage, and the gains outweigh the losses. And finding a professional to deal with it is both worry-free and labor-saving, and the key is that they are professional. Even if there is a problem, you can go to them to solve it until you are satisfied.

Attached sheet metal spray paint introduction: sheet metal painting is a kind of car repair technology, that is, the deformed part of the car metal shell is repaired, such as the car body shell was hit by a pit, you can restore it to its original state through sheet metal, and then through spraying special paint, the deformed car metal surface is restored to the same as other intact places, bright as ever.

The treatment of car dent scratching is as follows.

Scratch. 1.The scar part is coated with the same coating agent as the car body.

2.If it is only a very light scratch of the surface paint, treat it immediately with a mixture.

3.If it is a deep but slender scar, it can be repaired with colored putty. Concavity.

1.Suction cup: Pull firmly on the suction cup to bring it back to its original shape.

2.Hot water: Restitution by thermal expansion and contraction away from the rest.

3.Repair tool: Repair with a glue gun.

This kind of dent is basically sent to the repair shop, first to restore the surface, and then to repaint.

It is recommended to go to a repair shop for repairs. If the area is large, consider insurance.

Minor scratches and dents can be repaired without damaging the original paintwork.

Let's go to the 4S store and deal with it

If the degree of scratching is not very deep, the owner can buy his own paint pen to repair the paint, and the depression part can be adsorbed and restored by using tools.

Some new car owners because of the purchase of scratch insurance, so when the new car receives scratches and dents, it is like to apply for insurance, but it is not good, because the vehicle insurance has a certain relationship with the insurance premium of the second year, and the insurance amount of the vehicle purchased in the next year will be relatively high. However, it is necessary to repair the paint, because after the vehicle is scraped off, it is easy to rust when it encounters rain, and the cost of repairing it will be higher if it takes too long.

Workaround:

1. The shell of the car is made of iron sheet and plastic, and the front and rear bumper of the car are generally plastic. The plastic will soften when it comes into contact with heat, so according to this principle, the piece that hits the dent can be heated and ejected.

2. First of all, we need to boil a large bucket of hot water, and then add water to the recessed place with a spoon to heat the hot water.

3. The process of heating with hot water is long. Because the concave plastic needs to be heated to a certain extent before it becomes soft in order to achieve the effect.

4. After the plastic is heated to a certain extent, it is from the top hood. Push it out with your hand until the recessed piece protrudes and restores.

The above content reference: Encyclopedia - Automobile Paint Repair.

If the location of the scratch is not too obvious and not too serious, it is not recommended to report insurance or maintenance, but this is also divided into people, if the heart is not passable, then repair, if the maintenance fee is not much, do not report insurance, if the other party is fully responsible, then let it be different, the new car is recommended to go to the 4S shop for maintenance.

Sheet metal painting can repair scratches and dents in vehicles. The sheet metal repair process is complex. The repaired doors and lights need to be reinstalled and positioned, and the non-sheet metal parts need to be reset.

Sheet metal repair requires a high level of craftsmanship and skill from the repairman, requiring a high level of skill. And unremitting patience can achieve accurate installation, beautiful and generous.

Precautions in case of traffic accidents.

If the motor vehicle has small scratches and can move normally without damage, it should be removed from the scene in time. If a minor accident should have left the scene but did not leave, once the traffic was interfered with, the traffic management department would drag the vehicle, causing congestion, except for the traffic control. In addition to a fine of $200, other violations will also be penalized.

If you leave the vehicle in time, you will be exempted from other penalties for violations after consultation with the other party. Especially on highways, if you don't evacuate the scene in time, it is easy to have a secondary accident. Compared with the first accident, the second accident often causes greater injuries, causing more serious personal and property damage, and also greatly increasing the difficulty of further rescue efforts.

Sheet metal painting can repair the scratches and dents of the vehicle, and the cost is different according to different models, and the maintenance cost of imported cars and luxury cars is high. If the paint surface of the body is not damaged, but only dented, you can also directly use the large paint-free car dent repair technology.

Another set of dent repair tool kits is not expensive, and you can have it for dozens of dollars. First of all, clean the indented area, then load the special glue into the glue gun, plug in the power supply and preheat it for about 7 minutes. Then choose the appropriate gasket, pay attention to the large depression with a large gasket, the larger the gasket, the greater the traction force, and then use the glue gun to evenly coat the gasket with sol, quickly paste into the concave position, and gently press until the special glue is fixed and then let go.

Precautions for scratching and touching up paint on the door.

To touch up the paint, you should choose a qualified professional paint factory. Without skilled painters and dust-free high-temperature paint workshops, it is impossible to obtain satisfactory painting results. In addition, I would like to remind everyone that you must not believe the so-called original paint repair advertised by some maintenance companies, which is impossible.

The original painting process is baked at a high temperature of 200 °C. If the finished car is repainted with such a process, there is probably no part on the car that can afford it. Therefore, the paint used in touch-up is specially used for low-temperature baking, which is not the same thing as the original paint.

If the depression is more serious, you generally have to have sheet metal, and then repaint, you have to go to the repair shop.

If the body is concave and painted, it is recommended to paint sheet metal, about three hundred to five hundred, but if there is no paint and the version and care about the original car paint, you can try the paint-free car dent repair technology, no need to destroy the original car paint for body concave repair, the principle is actually very simple, it is based on optics and mechanics, and the use of the lever principle to slowly restore the pits of different depths to the original appearance, look at the following picture You can see it at a glance.

The picture below is the repair effect of our sharkskin car dent repair direct store**, the first one**The black border area on the left is the appearance of the original painted body, and the right is the appearance of the body after repair, how can you feel the specific effect, but after all, there are so many stores in the country that the car dent repair can not be generalized, so I recommend that you still go to the regular brand store to repair, so that the technical level will be *** and**fixed, unlike small shops, which will only shout prices all over the sky.

Apply for insurance, or go directly to the repair shop for repairs.