-
I won't copy those regulations on the Internet for you I'll still use my own words Personally, I think one is not too fast I don't know why I want to step on the accelerator the more I step on the accelerator The second overtakes and return to the driving lane Third, since you say that you are a novice, the car is not newly bought If it is, pay attention to ask the 4S shop that your car run-in period is not more than less There is nothing else By the way, there is also a long time to tell attention to mental concentration Have a good journey.
-
Don't drive too fast, keep a good distance from the car above, it is best to take two people to take turns driving, and rest for 20 minutes at each rest area.
If you are not familiar with the road conditions when you first get on the highway, you must look at the road signs, but if you run over, it will be big.
-
Don't drive fast, it's important to stay energized before you go. There is also the problem of the run-in period of the new car.
When overtaking, try to shine your headlights on the car in front of you, and then hit the left turn signal to signal that you want to overtake. The horn does not work very well at high speeds. If you're a newbie, it's best not to smoke.
Cigarette cartridge ash trouble can distract you. Of course, not going too fast on the road is a priority.
-
Check your correct tire pressure before you travel.
Then teach you a life-saving trick:
In the event of a puncture, don't panic, hold on to the steering wheel and go straight ahead, then brake slowly to slow down.
-
With the development of society and technology, almost every household now has a private car. However, due to the increasing number of vehicles on the road, considering the current traffic conditions, many car owners do not drive often in their daily lives, resulting in the strangeness of occasional driving. Today, let's talk about the precautions on the highway.
When running long distances at high speeds, the first thing to do is to check the vehicle for problems. Among them, there are tire pressure, brake pads and discs, and most importantly, the steering mechanism.
This is to prevent the occurrence of loss of direction due to tire failure or invalid braking. On highway sections.
In addition, the seats, mirrors, and other parts of the car should also be checked so that the driver is in the most comfortable position when operating the car, which can reduce the fatigue of the driver and make it more convenient to operate.
If there are children in the car, check the child safety seat to make sure it is safe. During driving, traffic rules should be strictly observed, and people in the car should wear seat belts.
During driving, pay attention to stay away from large vehicles and keep the distance between vehicles. In extreme bad weather, it is necessary to wait for the weather to change at the service station before driving the vehicle to minimize the risk.
Whatever happens, hold the steering wheel tightly and control the direction of the car. In case of emergency, call for help in time**.
There are many safety matters that need to be paid attention to when driving at high speeds, such as paying attention to proper deceleration when driving in rainy days, and not indiscriminately using the double flashing of the car. However, the most important thing on the highway scum is the careful control of the driver himself. Many safety hazards and accidents are caused by driver fatigue driving or lack of calm handling, so the most important thing is to be calm and cautious.
Millions of car purchase subsidies.
-
After entering the high-speed section, the vehicle has the conditions that can give full play to its performance, but if the driver does not understand or does not strictly abide by the driving regulations and scientific driving methods of the highway, and blindly pursues high-speed driving, it is bound to disrupt the normal driving order of the highway, bury serious hidden dangers of car accidents, and threaten themselves and others at all times.
Control of vehicle speed: driving on a wide section of the highway with few fixed references and high traffic flow, be sure to confirm the speed through the speedometer, do not blindly accelerate, and strictly abide by the driving speed requirements of the highway; The minimum speed shall not be less than 60 km h, which means that the high speed shall not be higher than 120 km h, and in bad weather conditions, it is necessary to slow down.
Highway lanes are divided into two-way four lanes, six lanes, eight lanes, motor vehicles on the highway, must strictly abide by the principle of lane separation, each way, shall not cross the line, change lanes, not allowed to ride the lane dividing line.
If there are 2 lanes in the same direction, all motor vehicles are driving in the driving lane, and the minimum speed in the left lane is 100km h;
If there are 3 lanes in the same direction, the car with a speed higher than 110km h will drive in the leftmost lane, and the car with a speed higher than 90km h will drive in the middle lane, and the speed in the right lane shall not be less than 60km h;
If there are more than 4 lanes in the same direction, the car with a speed of more than 110 km h will drive in the leftmost lane, and the car with a speed of more than 90 km h will drive in the middle lane (Article 2), and the speed in the right lane shall not be less than 60 km h.
-
Check before getting on the highway. If the car wants to drive normally, it must not break down, especially at high speeds, because the speed of the car on the highway is very fast, once the car has problems due to car failure, the consequences are very serious.
-
Carefully inspect the appearance of each tire for scratches. If it is only a rubber scratch, it will not affect the use, but if it hurts the tire line inside, it must be replaced with a new tire.
-
Expressway, referred to as expressway, refers to a highway dedicated to high-speed driving of automobiles. Expressways have different regulations in different countries and regions, different times and different scientific research and academic fields. As of December 28, 2018, the total length of expressways in China has reached 140,000 kilometers, ranking first in the world.
-
When the "puncture" is severe, it usually leads to the instantaneous collapse of the tire wall, so that the tire instantly loses its support, resulting in an immediate change in the vehicle's center of gravity, especially the front wheel puncture of the front-wheel drive vehicle, and the instantaneous shift of the center of gravity after the puncture is likely to cause the vehicle to lose control.
-
Highway signs are usually a diagram of a bridge crossing two roads, and their background color varies from country to country. Chinese mainland, Taiwan, South Korea, the United States, Canada, Japan, Switzerland, etc. use green backgrounds; The United Kingdom, Germany, and Austria use a blue background; There are others, such as the Hong Kong Expressway sign which is a red box.
-
Precautions before the car sets off on the highway:
1.Carefully and carefully inspect the whole car, and it is best to go to 4S for free testing to eliminate hidden dangers;
2.The morning before departure, check the following items again by yourself:
1) Tire pressure: front and rear depending on the load). The above refers to the use of original tires, if the tires are upgraded, the air pressure should be appropriately increased according to the standard.
In general, the tire pressure at high speed or in winter should be higher than the usual standard value to reduce the deflection of the tire at high speed and avoid puncture. Remove stones and debris between the tire lines.
2) Oil level: Because the oil consumption is slightly larger than usual in the high-speed period, the oil level should be kept just over the entire pitting area of the oil scale in the morning. If the long distance exceeds 2000 kilometers during the holiday, you should bring a tank of 1L of engine oil so that it can be added in time.
3) Add a full wiper glass cleaner to the canister.
4) Visually inspect the liquid level of the brake fluid tank.
5) Check the lighting system.
6) Check if the spare tire air pressure is sufficient.
7) Check whether the tools on the car are complete and ready.
8) Prepare the necessary maps and destination information, preferably using a GPS navigation system.
3.Prepare some money and place it in a convenient place (e.g. in the back pocket of the visor) to facilitate payment; Prepare some necessary medicines such as bottled drinking water, cooling oil, wind and oil essence.
-
Some basic indicators should be checked before departure, the brakes are not working, the horn is not sounding, the lights are not bright, and the oil is enough.
When driving at high speeds, close the windows to reduce wind resistance and prevent items from blowing out of the car. Don't throw things around and ruin your image.
Look at the road signs, choose a good direction, if you need to get off the highway, change the lane in advance, slow down, and get off the road. If you find that you are going wrong at the intersection, don't steady, don't turn around, don't brake suddenly, don't do stupid things, continue to drive, find the next intersection and get off the road, and then you can only figure out how to do it yourself. So understand the road conditions in advance, choose the path, and ask the seniors who have walked this road before you set off.
When changing lanes on the highway, remember to turn signals, and check the rearview mirror to see if there are any vehicles, and remember not to drive tired.
Safety first, I wish you all the best.
-
Check your tire tread before hitting the highway, replace the bad tire with the rear wheel or even replace it with a new one. Check that the spare tire is in good condition.
See if you need to do balancing and wheel alignment.
Check the oil again and change it if you go to the cold north.
Finally, check whether the glass water is sufficient to avoid affecting the line of sight.
-
Check your vehicle carefully, especially when the brakes and tires are kept at high speeds, and remember not to exceed the speed limit.
-
A highway is a highway that is exclusively used for motor vehicles. Generally, it can accommodate speeds of 120 km/h or more. When driving on highways, you should pay attention to the following:
1. When entering the main lane from the ramp, when there is an acceleration lane at the entrance, the speed of the vehicle should be increased to a certain speed through the acceleration lane. When merging, do not obstruct vehicles driving in the main lane. 2. The functions of the lane should be strictly distinguished, the lane should be divided, and the main lane should be taken under normal circumstances, and only when overtaking, the overtaking lane should be used to ensure the smooth flow of traffic.
3. Abide by the speed limit, speeding is easy to cause accidents. If the speed is too low, it will prevent other vehicles from driving normally. When driving in rain, ice and snow, the speed should be reduced.
4. Pay attention to the signs and markings on the roadside and over the road at any time when driving, and drive on the right side appropriately to avoid rolling the right lane divider, so as to facilitate the overtaking of the rear car with enough lateral distance. 5. The longitudinal distance between the workshops should be maintained. In general, when the road surface is dry and the braking is good, the workshop distance (m) is not less than the value of the vehicle speed (km h).
For example, the speed of the vehicle is not less than 80m when it is 80km h, and it is not less than 100m when the speed is 100km h. Always pay attention to the roadside workshop distance signs. In case of rain, fog, ice and snow and wet roads, the distance between the workshop should be more than doubled.
6. Please do not reverse, turn around, or cross on the main lane, and are not allowed to exceed the ** divider. 7. Do not obstruct the passage of firefighting, first aid, public security, emergency and other vehicles performing tasks. 8. Always hold the steering wheel firmly when driving at high speed, and when changing lanes or overtaking, the steering angle should not be too large to prevent the vehicle from drifting at too fast speed.
When braking is required, it is better to brake several times, and do not step on it to prevent the vehicle from deviating. 9. When overtaking, estimate the distance and the speed of both sides, when the situation is normal, you should sound the horn, turn on the left turn signal, overtake the car in front from the overtaking lane, and do not overtake from the right side. 10. Changes in the light in and out of the tunnel will affect the eyesight, so the speed of the vehicle should be appropriately reduced to adapt to the change of light and darkness.
11. When driving out of the highway, pay attention to the intersection warning board, divert the car from the main lane into the deceleration lane to slow down, and enter the general highway through the ramp.
-
High-speed driving is often a frequent accident area, driving on the highway to pay attention to a lot of problems, a little careless will be deducted points or fines, will also cause immeasurable traffic accidents, so what details need to be paid attention to, the following full introduction to the situation on the highway should be paid attention to!
1. The highway is only for vehicles to drive at high speed, only for vehicles with a certain driving speed, and eliminates the interference from the horizontal, longitudinal and other vehicles on the line, so the vehicle itself must have the ability to drive at high speed. In our country, vehicles below 60km h are not allowed to enter the highway.
2. Especially when driving at night, the visibility is low, such as other vehicles that are not tightly tied and fall off the goods from the car, thus causing obstacles, or being forced to stop due to vehicle failure. Therefore, when driving on the highway, the driver is not allowed to use his mobile phone, not to talk to passengers, and not to think about sexual questions.
3. Lane division, there is a ** isolation zone highway generally has four or more lanes, and the middle is divided into two independent lanes on the left and right with the isolation belt, and the round-trip lanes are completely separated.
4. Road markings are the easiest to ignore for us, but they are also very important, but they play a role in a big way, especially in the Huiyin high-speed section, we must look for the markings and drive safely.
5. There are plane, three-dimensional intersections, urban pavement will have traffic lights at the intersection, and the "intersection" of the highway is generally connected by a plane or three-dimensional highway, which ensures the safety of the premise and increases the traffic capacity and transportation efficiency of the road. So we need to look at the specific route.
6. Changing lanes is also a place that needs attention, the line of lane change is not straight into 90 degrees, but slowly playing in the process of moving forward, trying to keep the body parallel to the forward direction. In the case of fast speed, the opening amplitude is too large, and it is easy to roll over. After the main hall is completed before the lane change, it is not possible to change lanes immediately.
It is a violation to change lanes continuously back and forth. When changing lanes, it is also not possible to cross multiple lanes in a row at once, which is also a violation.
It is recommended to apply for a work-related injury determination before you can do a work-related injury identification. The amount of compensation can only be finalized after the appraisal level, and the amount of compensation will vary from place to place for the same level. If you are not familiar with it, it is advisable to seek the help of a lawyer. Or do it as follows: >>>More
Food processing talents are divided into technical talents and operational talents. Among them, technical talents mainly refer to the development, inspection and management talents with technical elements, among which the operation talents mainly refer to labor-intensive operation and processing talents. For the legal representative and main management personnel of the enterprise, they are required to understand the legal knowledge related to food quality and safety, and clarify the responsibilities and obligations they should bear; For the production and technical personnel of the enterprise, they are required to have professional and technical knowledge suitable for food production; For production operators, they should undergo technical (skill) training and be certified before taking up their posts; For quality inspection personnel, they should participate in training, pass the assessment and obtain the required qualifications, and be able to meet the job requirements. >>>More
I am also an electronics professional, the control of some hardware circuits around the periphery must be according to the underlying template program of the chip, just like the regulations must be done like that, but the underlying program must be connected by itself, which is good for the flexible application of the program, there are still more talents in this area, but there are not many people who are proficient, and there are more contacts with the writing of large programs, and program algorithms, the prospects are still good, come on!!
1. Friendship is always a sweet responsibility, never an opportunity. >>>More
I have a few suggestions, all of which I have used myself, so please refer to them. The score doesn't matter. >>>More