What is the best way to get rid of dampness in the basement?

The best way to get damp underground is for you to go to a renovation company. There are many ways to recommend it to you.

Some ventilation equipment can be installed in the basement, which can be moisture-proof.

The easiest way to prevent moisture in the basement is to hang some desiccant in it, you can choose a carbon bag of activated carbon, break the mothballs and sprinkle it there with activated carbon powder to remove moisture, and you can also sprinkle some desiccant on some corners and ground that are more likely to be wet, but be sure to replace the desiccant every once in a while.

Take a closer look at your basement to see if there are cracks or damp spots on the ground and walls, if there are any problems, it is best to shovel off all the damp aging walls, pay attention to the area should be slightly wider than the aging area, and then repaint.

Precautions for moisture-proof basements.

Before the waterproof construction, the wall, the top and the ground concealment project are accepted, the embedded parts are accepted, the trunking repair is leveled without sand and no hollowing, and the wall, top and ground surface are cleaned.

In the basement waterproof and moisture-proof sand paddle fully dried before the follow-up construction, can be first in the ground thickness of 5-9mm MDF protection (such as the height of the floor, the construction period allows the ground waterproof layer to do 50mm C20 fine stone concrete protection, need a long time of maintenance), before walking, do the floating floor structure should be fully dried on the ground waterproof layer, directly on the top of the auxiliary sound insulation felt plus 50mm C20 fine stone concrete, roof, wall installation shall not damage the waterproof layer.

The basement is under the first floor of the house, so it will be relatively humid, and it is not suitable for staying in such an environment for a long time, which is easy to cause rheumatism or joint soreness in the body. It is only suitable for storing some items for use, and to make the basement drier, you can use these methods: Method 1:

To disperse the tide is to open the window, if there is a window. The circulation of air in the basement is even more important. Long-term lack of indoor air flow, combined with dark and damp conditions, can aggravate the growth of mold and the like.

To speed up the air flow, ventilation equipment can be installed in a suitable position, and ventilation equipment can be divided into two kinds according to power, one is a non-powered exhaust fan, which is a more passive exhaust device, and the exhaust effect is relatively limited. It is also possible to install strong exhaust devices, such as negative pressure fans and axial fans, which may require exhaust ducts. Exhaust fans can be installed if there are windows.

Method 2: If you absorb moisture, you can use quicklime. It would be better if you piled some quicklime in the corner of the wall.

It is important to know that quicklime can absorb moisture and reduce the humidity of the air, so that the air becomes dry and germs are not so easy to grow. In addition, quicklime itself also has a sterilizing effect. It is possible to hang desiccant indoors.

Desiccants have a service life and generally need to be replaced frequently. Method 3: You can choose a moisture-proof mat when it is moisture-proof.

The principle of moisture-proof is actually quite simple, just like wearing an umbrella and a raincoat to block water in the rain. In the basement, you can lay a layer of moisture-proof mat on the ground, which can play a good role. If not, you can also replace it with foam cushions sold on the street, or you can replace this with cardboard sheets for cardboard boxes, which is cheaper.

However, this thing, after using it for a period of time, it should be taken out often to dry, and it is still relatively dry to use. Method 4: It can be installed with floor heating or dehumidifier, which also has a certain dehumidification effect.

Therefore, we recommend that the moisture-proof problem must be considered before the decoration of the basement, so that the comfort of the basement can be guaranteed. And the cost is relatively low. The problem of basement moisture prevention needs to be considered as a whole, and if it is dealt with before the basement decoration, it will get twice the result with half the effort.

And the cost of payment is low, if you choose the right product, the right construction method, basically the basement can be kept permanently dry, without paying the additional cost of continuous moisture protection.

If the basement is damp-proof, it depends on whether to use chemical or physical methods, and it is generally difficult for traditional waterproofing to withstand 3 years.

I use the Norwegian Terleyden electro-osmosis anti-seepage and moisture-proof system, by applying electrical pulses to the positive and negative electrodes to drain the water to it, the humidity of the wall is kept at a dry level, and the system is turned on less than one kilowatt-hour a day.

Guang'an green rattan decoration can be processed, and they have a set of lower chamber drying treatment system.

Tips for moisture-proof basements are simple and effective.

The reason why the basement is damp can be because of water vapor entering the basement or due to poor ventilation in the basement. Here are a few possible methods of dehumidification:

1.Use a dehumidifier: Placing the dehumidifier in the center of the basement can draw moist air into the machine, which then uses condensation to convert the water vapor in the air into liquid water, reducing the humidity in the air.

2.Enhanced ventilation: If the ventilation of the lower chamber of the dilug is poor, it is necessary to increase the frequency and duration of ventilation. Ventilation can be installed on the doors or windows of the basement, or an electric fan or dehumidifier can be placed in the basement to enhance the ventilation effect.

3.Clean the water source: If the dampness in the basement is caused by a water source problem, you need to clean the water source and drainage pipes to remove stagnant water and other dirt to reduce the humidity.

4.Keep it dry: Keeping it dry in your basement is an important measure to prevent dampness in your basement. You can use a moisture repellent to clean the contents of the basement regularly and keep the ground dry.

Basements that are too humid will have a negative impact on the living environment and facilities, and can be dehumidified in the following ways:

Ventilation: The basement air is not circulated and is easy to be humid, you can open the doors and windows for ventilation to promote air circulation and exclude humid air.

Anhu dehumidifier: Installing a dehumidifier can quickly remove moisture from the air and reduce the humidity in the basement. The dehumidifier can be placed in the corner of the basement, and it should be noted that the dehumidifier should be buried in a place that cannot be reached by children and pets to avoid accidents.

Laying moisture-proof film: Laying a moisture-proof film on the basement floor and wall can prevent the water vapor in the basement from rising and reduce the humidity in the basement. The moisture-proof film can be reused and needs to be replaced regularly.

Place desiccant: You can place desiccant in the basement, such as silica gel desiccant, moisture absorption box, etc., which can absorb moisture in the air and reduce the humidity of the basement. The desiccant needs to be replaced regularly.

Planting plants: You can plant some plants in the basement that like to enjoy the humid environment, such as pothos, monstera, spider plant, etc., these plants can absorb the moisture in the air through their own respiration, thereby reducing the humidity of the basement.

For damp basements, consider the following measures to dehumidify:

1.Use a dehumidifying machine. This is the main method of dehumidification, choose a moisture dehumidifier that can effectively absorb moisture, and continue to operate.

2.Improve ventilation. Increasing ventilation windows and increasing air circulation with a top exhaust fan can help remove excess moisture.

3.Reinforcement of basement exterior walls. Check whether the exterior paint is exposed, and the reinforcement coating protects the exterior wall.

4.Heat insulation. Thermal insulation is applied to the side walls of the basement to isolate the humid air and prevent condensation on the walls.

5.Plug the cracks in the wall. A special caulk is used to seal the gaps in the wall joints and prevent moisture from penetrating.

6.Carrying wet heavy loads. Remove the damp wood, newspapers, and other collapsed storage materials stored in the basement.

7.The substrate is moisture-proof. Use moisture-proof tape to apply a waterproof membrane to the line as it passes through the ground to stop moisture leakage.

8.Remove mildew and baldness. Use mold remover to remove mold from the basement and clean it at the same time.

9.Activate the downwater pump. If there is a problem with stagnant water in the basement, use a pure round drain pump to pump the stagnant water away to prevent moisture.

10.Use a dehumidifier. Spreadable or vapor dehumidifiers can be used to kill mold in the wet underground.

In summary, comprehensive measures are required to effectively dehumidify. First of all, the source of moisture should be eliminated, and then methods such as ventilation and insulation should be used, and then dehumidification equipment should be used.

Use a dehumidifier: This is the most common method. Choose a cherry wetter with a high moisture absorption capacity and place it in the center of the basement.

Increase ventilation: Moisture can be dissipated by increasing ventilation. You can open basement doors and windows, or install a second room door above the stairwell to allow air circulation.

Use a fan: Using a fan in a cluster can speed up air circulation and reduce moisture. Point the fan at the damp area of the basement and let the fan help bring the moisture out.

If the basement is too humid, it will cause great inconvenience to people's lives, and the following dehumidification methods can be considered:

Ventilation: The humidity in the basement is too high, and the indoor humidity can be improved by ventilation. Proper ventilation of windows can speed up the circulation of indoor air and take away water vapor, thereby reducing indoor humidity.

However, it should be noted that opening the window for ventilation for a long time can cause the indoor temperature to drop, and the ventilation time needs to be adjusted according to the situation.

Use a dehumidifier: A dehumidifier is a professional dehumidification device that can reduce indoor humidity in a short period of time. The right dehumidifier can be selected according to the area and humidity of the basement.

When using the dehumidifier, be careful not to place the dehumidifier too close to the water source to avoid damage due to excessive humidity.

Laying moisture-proof film: Laying moisture-proof film in the basement is a simple and effective way to prevent moisture. Moisture-proof membrane is a polymer material that can effectively prevent water vapor from penetrating into the basement interior.

When laying moisture-proof film, pay attention to not laying moisture-proof film in the basement where the floor or floor tiles have been laid, so as not to affect the service life of the floor and floor tiles.

Green plants: Plants have a certain hygroscopic effect, you can guess that some green plants can be planted appropriately in the basement, such as pothos, monstera, spider plant, etc., which can not only improve the indoor environment, but also play a certain dehumidification effect. It is important to note that a certain amount of humidity is required for the growth of plants, and an excessively humid basement may not be suitable for plant growth.

Here are some ways to dehumidify:

1.Use a dehumidifier: The fastest and most efficient way is to use a dehumidifier. It concentrates moisture in moist air and makes the air dry.

2.Increase the volume of air in the register: Through ventilation fans or open window doors, air can be circulated, thereby reducing the degree of humidity.

3.Maintain the right temperature: Increase the temperature by heating the basement or adjusting the air conditioner yourself to reduce the humidity.

4.Use dehumidifiers, such as silica gel and activated charcoal, which can help adsorb and absorb moisture from humid air.

5.Patching holes: If there are cracks in the corners of the wall, broken floors, etc., you need to repair the ruler bend to prevent the entry of moisture and the increase of wet materials.

It is necessary to choose the appropriate method on a case-by-case basis and take timely measures to prevent adverse consequences in a humid environment.

With the development of urbanization, more and more people choose to buy a house with a basement. However, many people are worried that the dampness will affect the living environment on the first floor and basement, and even threaten the health of the owner. So, if Lu Luguo buys a house with a basement on the first floor, how to solve the dampness problem?

First of all, we need to understand why the first floor is damp, because the wall on the first floor is directly lifted from the ground, and it is easy to regain moisture. In addition, if the house on the first floor is poorly ventilated and the air circulation is not good, moisture will accumulate indoors and will also cause dampness. With a basement, the first floor is much less humid because it is farther away from the soil.

But the dampness of the basement cannot be changed, the ventilation is not good, and it is more susceptible to the influence of groundwater. Therefore, if you want to make good use of the basement, you need to do a good job of moisture-proof, mildew-proof, ventilation, drainage and other basic projects, don't feel very complicated.

For example, there are many options for tool sewage lifting pumps specially used for basement drainage, including domestic, imported, high-end, low-end, and whatever. However, in order to ensure the stability and longevity of the basement drainage system, it is recommended to choose a guaranteed brand.

The domestic Zhiliu sewage lifting pump adopts advanced technology, making the lifting pump a part of the smart home, the LCD touch screen controller is exquisite and atmospheric, and can also be connected to the network, and then connected to the mobile phone, through the mobile phone can fully control the equipment, simple and convenient to use. It is also surprising in terms of drainage capacity, and the S1 motor working system is adopted, which can easily cope with large flow drainage. Other sewage lifting pumps on the market are still in the stage of button controller and intermittent drainage, and Zhiliu has brought them new ideas for development.

In the basement, modern machines such as dehumidifiers, fresh air systems, and sewage lifting pumps can be equipped to ensure that the living conditions in the basement are at a high-quality level.

Basement dampness can cause mold and bacteria to grow, which can affect your health. Here are some ways to dehumidify:

Use a dehumidifier: A dehumidifier can effectively remove moisture from the air. When purchasing, you should choose the right dehumidifier according to the area of the basement and the degree of humidity.

Make sure there is good ventilation: You can open the windows to transport the missing households or doors to let fresh air into the basement, and with the air circulation, the moisture can be gradually exhausted.

Installation of basement ventilation system: A basement ventilation system can be installed to exhaust moisture from the basement.

Clean and dry basement: Keeping your basement clean and dry can help remove moisture. In particular, it is necessary to clean up the debris and garbage that may be stored in the basement in a timely manner. Sideline arguments.

Use a dehumidifier: Buying a desiccant or dehumidifier to place in the basement can help reduce moisture.

Please note that if the moisture problem is severe or persistent, it is highly recommended to have it checked and treated by a professional.