What happens when the fish tank is not circulating, and what are the ways of filtration?

There are four reasons why the glass cylinder does not circulate. The first is a circuit problem, that is, a power outage, which in turn causes the pump to stop working. It is also possible that there is something wrong with the pump itself, or the centrifugal impeller is coiled with dirt and must be dealt with in time.

Or if the inlet and outlet pipes are blocked, you can turn off the pump and check it, and if you have it, you can drain it.

Or a blockage in the filter material, usually a filter cotton, indicating that it's time to clean up. If the circulating water pipe does not drain, indicating that the pressure is not enough, it must be filled again, generally speaking, the water cap will be opened before the water passes through the sewer pipe, if it is not opened at this time, then the water valve must be broken, and the repair must be completed.

If the water circulation of the fish tank is slow, the output power of the pump can be increased.

If the pump cannot be adjusted, it can only be replaced with a new one. In addition, if the water circulation system is slowed down due to a long period of use, it may be caused by the blockage of the filter cotton, so you must only remove the filter cotton and clean it up. It should be noted that the filter cotton must be cleaned with the original tank water, not tap water, otherwise the nitrification system of the cylinder will be destroyed.

Physical filtration: Physical filtration is an indispensable part of the filtration system software, which is mainly responsible for filtering out the residue in the water, and the most commonly used filter material is the filter cotton. However, it may clog after a long time, so it is best to clean it up on time.

Tap water cannot be used for cleaning, and it is best to flush it with the original tank water.

Organic Chemical Filtration: There are many types of filter media for organic chemical filtration, such as activated carbon.

Ammonite, volcanic rocks, most of them bear the adsorption of harmful positive ions.

However, it should be noted that this kind of filter material has a certain effectiveness, and it generally needs to be changed every 1-3 months, otherwise the filter material in a saturated state of digestion and absorption will release harmful substances. Microbial filtration: Microbial filtration mainly relies on nitrifying bacteria.

Artificial culture of nitrifying bacteria.

In addition to turning off the lights and detonating the oxygen, what also needs to be done is to prepare the bacteria house in advance, so that the nitrifying bacteria can attach to the site. It should be noted that the bacterium house is not allowed to be moved casually, otherwise the ecological cycle of the tank will be destroyed.

I think there are mainly 4 reasons, the first is the circuit problem, it may be a power outage that causes the pump to stop working, or it may be that the pump itself has a problem, or Ye Long is entangled in debris and needs to be cleaned up in time, or it may be that the outlet pipe is blocked; Filtration has physical filtration and chemical filtration, physical filtration is mainly responsible for filtering impurities in the water, the most commonly used filter material is filter cotton, and chemical filtration can be carried out with volcanic rock.

If the fish tank does not circulate, it may be that there is a problem with the circulating pump, or it may be caused by a power outage, or the impeller is entangled by some debris, and the outlet may be blocked; Filtration generally includes chemical filtration, physical filtration, biological filtration, artificial filtration, etc.

It may be caused by the lack of electricity or the problem of the water pump, you can change to a different pump, so that it can be better filtered, you can use physical filtration or chemical filtration such as activated carbon, volcanic rock, nitrifying bacteria.

The fish tank does not circulate because of the problem of the circuit, or the power failure will cause the pump to stop working, or it may be that the pump itself has a problem, at this time, it is necessary to check in time, and the filtration method is by physical filtration, chemical filtration, and biological filtration.

There is no need to keep the circulating water on all the time. Depending on the specific situation, as long as there is no lack of oxygen in the tank and the water is not dirty, it does not have to be opened. Circulating water is mainly used for filtration and slag removal, and oxygenation in contact with air. If it is left open for a long time, not only will electricity be wasted, but the fish will not be able to rest, and it will not be good to raise.

Raw water cannot be used, and raw water is tap water that has not been dried. The temperature of the water in the fish tank is too different. You can choose to change the water once a week, and you don't need to change the water too often.

When changing the water, you should first put the water in the sun for a few days, and the water temperature should be about the same as that in the fish tank.

There may be the following reasons why the water in the fish tank is not circulating:

1. The pump does not work due to circuit failure;

2. The pump itself is faulty or the impeller is wound with debris;

3. Blockage of inlet and outlet pipes;

4. The filter material is blocked.

It must be effectively disposed of after finding the specific cause, and the cycle stop time should not be too long, otherwise it will have an impact on the nitrification system.

There are four main reasons why fish tanks don't circulate. The first is a problem with the electrical circuit, which is a power outage, which causes the pump to stop working. It is also possible that there is a problem with the pump itself, or that the impeller is entangled in debris and needs to be cleaned up in time.

Or if the inlet and outlet pipes are blocked, you can turn off the pump and check it, if there is any, just empty it. Or a blockage of the filter material, usually a filter cotton, indicates that it is time to clean. <

There are four main reasons why fish tanks don't circulate. The first is a problem with the electrical circuit, which is a power outage, which causes the pump to stop working. It is also possible that there is a problem with the pump itself, or that the impeller is entangled in debris and needs to be cleaned up in time.

Or if the inlet and outlet pipes are blocked, you can turn off the pump and check it, if there is any, just empty it. Or a blockage of the filter material, usually a filter cotton, indicates that it is time to clean.

1. Physical filtration: Physical filtration is indispensable in the filtration system, it is mainly responsible for filtering out impurities in water, and the most commonly used filter material is filter cotton. However, it may clog after a long time, so it is best to clean it regularly.

New water can not be used for cleaning, it is best to flush with the original tank water.

2. Chemical filtration: There are many filter materials for chemical filtration, such as activated carbon, ammonia stone, volcanic rock, etc., most of which are responsible for adsorbing harmful ions in water. However, it should be noted that these filter media have a certain timeliness, and they usually need to be replaced every 1-3 months, otherwise the saturated filter media will emit harmful substances.

3. Biological filtration: biological filtration mainly relies on nitrifying bacteria, and in addition to turning off the lights and detonating oxygen for artificial cultivation of nitrifying bacteria, what also needs to be done is to prepare a bacterial house, so that nitrifying bacteria can have a place to attach. It should be noted that the bacterial house is easily immovable, otherwise the ecological cycle in the tank will be destroyed.

Hello dear, the out-of-tank filter is installed on the outside of the fish tank or the Lvnayan aquarium, so it is called the "out-of-tank" eggplant filter. When the filter outside the tank is working, the water will flow into the filter from the fish tank, and the impurities such as dirt and bacteria will be filtered through the filter before being sent back to the fish tank. Therefore, the off-tank filter should usually form a closed circulation system, so that the filtered water can be returned to the fish tank, otherwise the purification effect on the fish tank environment will not achieve the expected effect.

If the out-of-cylinder filter does not circulate, it could be due to the following reasons:1The water level is not enough or the current is not strong enough:

The out-of-tank filter needs to be hydraulically pushed, and if the water level in the fish tank is not enough or the water flow is not strong enough, a closed circulation system may not be formed. 2.The terrain is too high or too far away to dismantle silver:

The position of the filter outside the tank also affects the circulation effect, if the outside filter is placed too high or too far away, no matter how powerful the filter is, it will not be able to circulate the water back to the tank. 3.Blocked pipes:

During long-term use, there may be scale and debris in the pipes, which will cause the water flow to be blocked, and will also affect the circulation effect of the filter. In summary, in order to ensure the normal operation of the filter outside the cylinder, it is necessary to ensure that the water level and water flow are sufficient, and the placement of the filter and the cleaning of the pipe also need to be strictly controlled.