Car seat disassembly steps and adjustments

The steps of disassembling and assembling the rear seats of the car are: 1. Find the wrenches on both sides of the head of the rear seat and close to the window; 2. Pull the wrench, the backrest of the rear seat can be flipped forward, and the seat cushion can be removed by lifting the rear seat up; 3. Install it in reverse order according to disassembly. The cleaning method of car leather seats is:

1. Prepare tools and cleaning materials; 2. Spray foam cleaner on the seat; 3. Clean the stains on the seat; 4. Wipe off the foam with a dry rag; 5. Open the window and let it dry naturally. The precautions for the maintenance of leather seats are: 1. Choose a strong alkaline cleaning agent; 2. Wipe dry with cotton paper towels after cleaning; 3. Avoid sharp objects scratching the cortex.

Prepare tools such as scissors, nail cutters, tiger tooth pickers, cross lifts, slotted cuts, sockets, adaptors, quick wrenches, etc.

Prepare the pad cloth and place the seat to be installed on the pad cloth and prepare it for installation.

How to disassemble and assemble a car seat - Disassemble the front seat and front rest.

1. Remove the handrail screws with the sleeve and remove the handrails.

2. Remove the plastic cover of the seat adjustment knob with Huyaqi, remove the base screw with the sleeve, and remove the front seat to complete the decomposition.

3. Remove the elastic band attached to the seat back and take out the front seat.

4. Disassemble the back plate screws, remove the front backrest back plate, and the front seat back is disassembled.

How to disassemble and assemble a car seat - Remove the front support cover.

1. Disassemble the plastic hook strip behind the front backrest, turn the cloth cover from back to front, pry open the front and lower connection nails with Huyaqi, and pull out the steel wire for later use.

2. Pull open the zipper of the back plate, pry open the back plate connection nail with Huyaqi, and pull out the steel wire for later use.

3. Loosen the plastic hook card strip under the front seat, pry open the iron pin piece with Huya, loosen the old cloth sleeve card, flip the front seat, turn the old cloth cover up, and pry open the connecting card nail with a Huya knife, and pull out the steel wire for standby.

4. Remove the waste staples in the seat foam.

If it is an electric seat, remove the switch wiring harness plug and the seat load sensor plug, you can separate the seat from the chassis and take off the seat. As for the adjustment, there is a corresponding switch, which can be adjusted after installation.

Generally, the front seat slideway is put last, you can remove the front two screws, and then slide the slideway to the front, remove the back two screws, remove the airbag line, the safety belt alarm line on the line, the rear row first disassemble the cushion, the general seat is lifted up, you can remove the two buckles, while pressing back, you can remove the cushion by lifting it up, and if you remove the backrest, you need to put down the rear backrest and then take a screwdriver to resist the rotation shaft to dismantle.

Usually the car seat adjustment switch is located on the side of the seat, the seat adjustment switch is divided into manual adjustment and automatic adjustment, although it seems to be very different, in fact, their function and principle are the same, but the control mode changes.

Fabric seat care.

Due to the characteristics of the material, the fabric seat will have large fiber holes, so it is best not to eat or pile up sundries in the car. If you have to do it, be very careful not to let fine food crumbs fall into the car. Because if food particles fall into the fiber holes, it is difficult to detect and clean up in time.

If it takes too long, mites or other microorganisms will breed and cause the environment in the car to deteriorate.

Fabric seats can easily get dirty, but they are not as difficult to clean up. If it's not particularly dirty, just use a brush and a hand-held vacuum cleaner to clean up, brushing the surface while vacuuming to remove fine debris.

First, the disassembly method:

On both sides of the head of the rear seat, near the window, there will be handles, pull the handle, the backrest of the rear seat can be turned forward, and most of the cushion parts of the rear seat are squeezed directly to the rear of the car, and then lifted up to come out.

Second, the rear seat lifting method:

1.Under the heads on both sides of the rear seats, there is a switch to push forward after pressing it, 2Foldable backrest, open the rear trunk under the seat (if you can't see it, it may be pressed under the seat) There is a black strap to pull back and lift the seat up, 3Attach the hook to the front seat header and adjust the strap.

Remove the armrest screws with the sleeve, remove the armrest, remove the plastic cover of the seat adjustment knob with the tiger teeth, remove the base screws with the sleeve, remove the front seat to complete the decomposition, remove the elastic band connected to the seat backrest, take out the front seat seat, remove the back plate screws, remove the front backrest back plate, and the front seat back is disassembled.

Car seats are an important part of the vehicle, and the function of the car seat is not only to provide a seat for the driver, but also to be an independent body composition, which is also closely connected with other systems. Car seats are made of different materials, and the common types are leather seats and flannel seats.

How to install the car seat cover.

Take out the car cushion in the front row, put it into the cushion vest, put on the seat cushion head cover, take out the chuck, install the chuck, plug the chuck into the gap, jam it after stuffing the chuck, clamp the chuck, adjust the cushion apron, clamp the elastic band of the car seat cushion apron, and put it into the car seat cushion headrest.

At this time, the front row installation of the car cushion has been completed, the installation buckle is clamped with the elastic band, the position of the cushion is adjusted, the rear car bench is installed, the armrest is ready to be inserted, and then inserted when pushed into an oblique angle, and the armrest is pushed back, and it is best to install the backrest buckle that was originally installed, both sides must be clamped, and finally adjust the overall feeling effect on it, and the rear seat cushion installation is completed.

According to the different models, the disassembly method of the seat is also different, taking the Corolla model as an example, you can reach in and touch the place where the base and the backrest meet, there is a place inside that is stuck, press it a little harder, lift it up to disassemble one side, and use the same method on the other side to remove the seat cushion.

Find the fixing bolt first and remove it.

Hello friend. The car seat is fixed by four screws, which can be removed with a wrench, and it is enough to align the screw holes when installing.

How to disassemble the rear seats of the car, this thing is very easy to do, you drive the car to the repair shop, and the master will remove it for you.

Just lift the seat directly (with a bit of effort), and then you can see the 3 screws, and the back is removed when you unscrew it.

The rear seats are uneven when they are folded down? The seat removal tutorial is coming, a necessary skill for bed and car self-driving travel.

The steps to disassemble and assemble the car seat are as follows:

1. Generally, the front seat slideway is cleared by the last wheel, and the front two screws can be removed, and then the slideway is slid to the front and the back two screws are removed;

2. Remove the airbag line, the safety belt alarm line is on the line, the rear row first disassemble the cushion, generally the seat is lifted up, you can remove the two buckles, while pressing back, while lifting up the cushion can be removed;

3. If the backrest is removed, you need to put down the back backrest and then take a screwdriver against the rotating shaft to disassemble it.