-
No, it's because of the submersible pump.
It does not function the same as the oxygenation pump, so it cannot be replaced.
Here are the features of both devices:
The function of the submersible pump is to be used for water circulation in fish tanks and rockeries.
The function of the oxygenation pump is to press the air into the water, so that the oxygen in the air is in full contact with the water, so that the oxygen is integrated into the water, so as to increase the amount of dissolved oxygen in the water body, so as to ensure the growth needs of aerobic organisms.
The precautions to be taken in use are as follows:
Submersible pump: 1It can be used when it is greater than or less than 15% of the normal voltage.
2.If the power cord is damaged, disconnect the power immediately3Wash the rotor and water blades regularly.
4.The user must check the rated voltage of the pump before use.
Whether it is consistent with the actual voltage. 5.When installing, dismantling and cleaning the water pump, it is necessary to unplug the power supply and cut off the power supply to ensure safety.
6.It is necessary to clean the filter basket and filter cotton frequently to ensure normal water intake and good filtration effect. 7.
To protect the pump body, if it breaks, stop using it immediately. 8.The maximum immersion depth of the pump into the water is 0 4 meters.
Oxygen Pump: 1It is recommended to open it 24 hours a day.
2. Be sure to place it above the water surface.
-
Yes, it's up to you how you use it. Make a water pipe connected to the outlet of the water pump, so that the water flowing out has a difference of more than 10 cm from the water surface, and the effect is good.
-
<> circulating pump for fish tank also needs to use an oxygen pump. The circulating pump can increase the contact between air and water by generating a flow of water, which can have a certain aeration effect, but for large fish, the aeration effect is not excellent, so an additional aeration pump is still needed to provide oxygen. It is worth mentioning that the oxygen pump does not inject oxygen into the water, but into the air, which can avoid oxygen saturation and prevent bubble disease.
-
It can't be changed.
Generally, the pump is driven by the motor to drive the fan blade to pump water and generate centrifugal force, which is the so-called centrifugal pump. The air pump is driven by electromagnetic vibration, and the piston leather bowl is driven by high-speed vibration, and cannot be used to pump water. The fish tank aerator, also known as aeration pump, air pump, oxygen pump, etc., is a facility to increase the amount of dissolved oxygen in the water body.
-
You can change to find a water pipe that is larger than the air pipe, not too big, insert the air pipe into the water pipe 10 cm, and use the air pump to drive the water flow, it will become a water pump, but the pressure is limited, but it is enough to do filtration and sewage to ensure the water quality. It is best to use a large displacement air pump, my home is my own pondering, after the change I found some stones and sand to put a few holes in the storage box, pad the wet wipes and start filtering, the effect can be, the most important thing is that I am lazy and basically do not change the water, the water quality is ok, the special disinfectant for fish farming is added to the homemade filter (storage box full of sand) The storage box is heavy with water-based plants, the plants grow ruthlessly, they all hang down, the fish eat these grasses, occasionally the children will feed some bread crumbs and the like, and they don't need to clean up after feeding, The self-modified water pump sucks the poop residue into the wet wipes of the storage box, and the wet wipes are replaced every half a month. I've been raising it for more than a year, and the fish are all fat and I plan to change to a big fish tank...
-
There is a relationship between the water level and the flow of the air pump, which is just changed to play or fish tank landscaping to play with circulating sand blasting, and the actual flow rate of 5 watts of air pump is not as good as that of a tile submersible pump.
-
。。。The submersible pump is to suck out the water in the tank and then filter it and circulate it back to the fish tank. When the water breaks through the water surface, it is beneficial for dissolved oxygen. Just turn on the pump and run it, and you don't need to operate anything
-
The submersible pump pumps out the water to the surface of the water and falls, which can increase oxygen.
-
The function of the submersible pump is to pump water, and the three-in-one pump has the function of increasing oxygen, while some others, such as the pure submersible pump of AT Ihan, do not have the function of oxygenation. Submersible pumps can generally be used with different filtration forms, such as upper filtration, bottom filtration, back filtration, side filtration, etc., but in the final analysis, it is the role of pumping.
-
The main thing is filtration, so that the debris in the water is filtered clean, and most of it can be oxygenated!
-
The following is for reference.
1. How big is the oxygen pump for the --- fish tank, depending on the size of the fish tank volume, and the 3W oxygen pump is suitable for the fish tank below 50 cm long.
50-100 cm long fish tank suitable for 5W oxygen pump.
The 100-200 cm long fish tank is suitable for 8W oxygen pump 2--- how big the fish tank water pump is, it also depends on the size of the fish tank volume, and the water pump generally adapts to the flow rate of 5 times the water capacity of the fish tank.
For example, the water capacity of the fish tank is 200 liters of water, and it is suitable for a 1000L h water pump, which is about 20-25W water pump.
No, you just put the filter pump in the water and connect the plastic pipe to the filter box with the filter cotton and activated carbon.
Hang, do not let the pump touch the glass tank. To give you a reference, my tank.
What do you want to know?
Insulation resistance of submersible pumps: including the resistance to the ground of each phase of three phases, the normal is 300 megaohms to infinity. The phase-to-phase resistance of two pairs of three phases is normally 300 megaohms to infinity. Detect with a shake table. >>>More
The most important thing is the flow rate and head. First of all, we need to figure out the flow rate, that is, how long it takes to pump and how much water, for example, the pool is 1 cubic meter, we hope to pump it in 10 minutes, then the flow rate should be 6m3 h, and combined with the water output speed of the well water stock, don't pump empty. Then there is the pressure or head, 8+8+17 (per layer) = 33m is necessary.
The difference between sewage pump and submersible pump is mainly reflected in the following three aspects: >>>More