How to fix the car seat cover is easy to slip, and how to fix the car seat cover?

Many cars have reinstalled car seat cushions on the seats to protect the leather of the car seats, which can increase the aesthetics of the car and extend the life of the seats. But there is also a problem, many car seat cushions are always running and easy to slip, so how should we fix them in this situation?

Car seat cushions are always the cause of slippage.

1. It may be because the quality of the silicone under the car seat cushion is not good, there is no anti-slip function, or the effect is not very good.

2. It may be that when installing the car seat cushion, it is not installed and fixed, resulting in always running and slipping.

3. Or because the car seat cushion has been used for too long, it has been aging and hardening, and the car seat cushion needs to be replaced.

4. It may be that the fixed plum buckle of the car seat cushion falls off, resulting in the car seat cushion not being fixed, and this situation will also occur.

Car seat cushions are always a slip fixation method.

1. The normal car seat cushion is fixed in three places, one at the head, one at the connection between the back of the seat and the seat, and the last one under the seat. Some of the seat cushions are on the left and right sides of the seat, depending on the situation.

2. First of all, we need to find the hidden groove under the seat, and clamp the fixed seat cushion plum buckle into the hidden groove.

3. Then put the plum buckle at the connection between the back of the seat and the seat, and stuff the plum buckle into the back seat of the car from the connection of the car seat. Generally, there are two plum buckles, one on the left and right sides, and the two plum buckles are fastened together from the back seat of the car.

4. The fixation of the head is the simplest, generally using the telescopic belt to cover the headrest.

Method steps.

1. Before installation, first of all, check the quality of the purchased car cushion and the strength and length of the suture thread, so as to lay a good foundation for the installation behind the back. Usually a set of car cushions includes: two front seats, two rear seats and one long cushion, a total of five pieces.

2. The installation method of the front driver's seat cushion of the car: the front driver's seat cushion of the car has a hood, and the car seat cushion is directly put on the lower cover, and then there are one or two buckles at the car seat cushion body, you can directly insert the car seat cushion buckle into the gap of the seat by hand, so that the car seat cushion will not move forward. At this point, you hook two small hooks and loops in front of the paved car cushion into the iron bar under the seat.

Some of them do not have a tongue hook but an elastic band, so you need to pass the buckle through the middle gap of the seat through one end of the buckle and pass under the seat and lock it with the buckle at the other end. The front passenger seat is then installed, as is the other passenger seat.

The car seat is composed of a backrest and a seat, and the front seat and the rear seat are installed differently, so the car seat cover installation is divided into four parts: the front backrest, the front seat, the back backrest, and the rear seat.

1. Install the [front backrest cover]:

First take off the headrest of the front backrest (sometimes you need to press and hold the headrest activity bolt), then carefully cover the [front backrest cover] (pay attention to the left and right sides and the front and back), and then wear the front of the [front backrest cover] from the gap between the seat back and the seat to the back side, and finally glue the front and back of the [front backrest cover] with the hook and loop (it will be firmer if you stick it hard).

2. Install [front seat cover]:

First, lay the [front seat cover] on the seat surface, put the edge down after inserting the seat, pass the hook and loop on the [front seat cover] under the seat and pass through the black buckle, and then fold back and stick it with the hook and loop (it will be firmer if you stick it hard). Finally, the elastic bands on both sides of the edge and the two elastic bands on the seat surface can be tied together separately (pay attention to carefully tidy up the flat seat cover).

3. Install [back back cover]:

First take off the backrest headrest on both sides (sometimes you need to press and hold the headrest movable bolt), then carefully put the [backrest cover] carefully (pay attention to see the left and right sides and the front and back), and then wear the front of the backrest cover from the gap between the seat back and the seat to the backside, and finally tie the elastic bands around it together.

4. Install [rear seat cover]:

First of all, spread the [rear seat cover] on the seat surface, put the edge down after putting it into the seat, turn the seat over, and tie the elastic bands around it tightly together (pay attention to carefully arrange the flat seat cover).

Be sure to buy it according to the model matching, and fix it with the fixing strap and buckle that comes with the seat sleeve.

When you wash your car, find a car wash master to help you set it, it's still quite troublesome to do it yourself.

Car seat cover: A cover for a car seat.