What do you need to pay attention to when decorating the bathroom?

The bathroom should be separated as much as possible. The benefit of functional area separation is that each function can be used separately without being disturbed, and the use efficiency of the entire bathroom is improved.

Pink, a large amount of use is easy to make people upset. The heavy pink color will keep people in a state of high spirits, and after a while, the people who live in it will have an inexplicable heart fire in their hearts, causing irritability.

It is necessary to pay attention to the problem of floor drainage, if the drainage hole is not large enough, the water flow can not be discharged in time, then the bathroom will become flooded.

The bathroom uses a lot of electricity, and it is best to route the wiring separately when the circuit is transformed, otherwise there will be electricity safety problems. Electrical appliances with more than 3000W power need to be controlled by a separate circuit, which is easy to overhaul and can improve safety.

The most important thing is waterproofing, not only the ground waterproofing should be done, but the wall waterproofing should not be ignored, at least the meter waterproofing. Then there are the toilets, which are particularly easy to clog with poor quality, and almost never clog with good ones. Otherwise, depending on the individual situation.

Don't do toilet shifts and floor drain shifts, which are the most problematic; A series of problems such as leakage under the toilet, clogged toilet, blocked floor drain, and floor drain smell are all caused by this. ‍‍

First of all, pay attention to waterproofing, you must do a good job, you must find a professional construction personnel to do it for you, and the floor should choose the kind of non-slip, so that you will not fall.

ventilation and drainage measures, which are very necessary. A good bathroom is free of odor and water stains.

There will be a lot of circuit renovation projects for the second decoration of the bathroom, and there will be more places to pay attention to. The most important thing is to adjust the wiring, the wiring should be horizontal and vertical, and the circuit goes from the ceiling, so that although the cost of the pipeline is increased, the safety factor is greatly improved. ‍‍

Test the water after the porcelain tiles on the bathroom floor are pasted, and rework immediately if the water is slow. The flow of water in my house is relatively slow, and my heart softened a little at that time, and now there is always a little stagnant water when taking a bath, so that our main bathroom's shower head of hundreds of silver is idle, and now I am always thinking about how to remedy it.

There are two major problems that need to be paid attention to, one is the leakage prevention treatment of the ground. In one is the socket put a few more.

We have to use water heaters every day, so we must buy some good ones when choosing, and we really can't ignore the leakage hazards of water heaters; Exhaust fan, many friends should have this feeling, after taking a bath, the bathroom is full of steam, and the exhaust fan can't be discharged, so I suggest that everyone should also buy a good exhaust fan, not just decorations.

After completing the basic work of the renovation, the overall partition of the bathroom can consider the design of dry and wet separation. Dry and wet separation is a popular design concept in modern bathroom design, which divides the bathroom into two, dry and wet separation, which can keep the venue outside the bath dry and hygienic, maintain the overall environment of the bathroom clean and beautiful, and also avoid the conflict between bathing and going to the toilet.

The bathroom is a place where multiple water and electricity converge, and special attention should be paid to it in the stage of hydropower transformation. Nowadays, there are more and more electrical appliances in the bathroom, such as the installation of hair dryers, electric water heaters, smart toilets, jacuzzi and other sanitary appliances and household appliances, water and electricity renovation should be reserved for water circuit to avoid the trouble of rewiring in the future. In addition, the bathroom is relatively humid, it is best to use lamps and switches with safety protection functions, and install waterproof sockets to avoid leakage and electric shock caused by moisture.

Bathroom waterproofing, construction materials must be selected from the regular manufacturer of polymer cement waterproof mortar, the construction process in strict accordance with the requirements of waterproof materials step by step, two closed water tests can not be sloppy.

When there is no bathroom at home for decoration, you need to consider more details such as waterproofing, ventilation, etc. So what exactly should you pay attention to? Let's take a look.

1. The bathroom is an area with more water, and waterproofing should be put in the first place in the bathroom decoration. When decorating the bathroom, it is necessary to determine the waterproof height of each area of the bathroom, choose a good waterproof material, and pay attention not to destroy the original waterproof layer when carrying out hydropower transformation. When the waterproof project is completed, the closed water test should be carried out on the toilet to check whether the waterproof project of the toilet is qualified to avoid affecting the normal use in the future.

2. The toilet is a multi-functional area, which needs to be reasonably planned and spaced to ensure the normal use of various functions of the toilet. When planning and layout, soft partitions and hard partitions can be used to divide them. The use of soft partitions can increase the aesthetics of the bathroom, but it is not practical for small hygiene.

The rigid partition can effectively divide the space and is suitable for all kinds of toilets.

3. Commonly used sanitary partition materials are glass, plexiglass, aluminum alloy, plastic steel, rusty steel, etc., and commonly used partition tools are shower curtains. The toilet has heavy water vapor, so it is best to choose a glass material that can be waterproof for waterproofing considerations. This material not only has a good waterproof effect, but also can be convenient and beautiful in use.

4. In the precautions for bathroom decoration, safety is also a problem that cannot be ignored in bathroom decoration. There is a lot of water in the bathroom, so you should choose a floor tile with anti-slip function to avoid falling during use. Lamps and sockets should be equipped with protective covers to avoid potential safety hazards caused by water vapor.

Secondly, the bathroom cabinet of the bathroom should also choose arc-shaped furniture to avoid hitting the bathroom cabinet when falling.

1. Sanitary appliances The installation position of sanitary appliances should be correct, and the upper edge of the appliances should be horizontal. Bathroom appliances should choose branded products with good waterproof performance, such as bath warmers or bath bombs used in a humid environment for a long time, the shell should be made of stainless steel, with good anti-corrosion performance, and with waterproof power switches, cables and plugs. 2. The installation of the pipes in the bathroom should be avoided as much as possible to change the original upper and lower open pipes, and the decoration must be horizontal and vertical, firmly laid, and the slope meets the requirements.

The floor drain design is still based on the upper sewer pipeline, and the surface should be slightly lower than the ground.

As the washing space at home, the status of the bathroom in the home is naturally very important, 100 square meters of space to carry out bathroom decoration, can play a relatively large space, in fact, we all hope to have a clean and refreshing bathroom, so there are many people will also ask how to decorate the bathroom, in fact, the bathroom decoration must first determine the style, and then according to the size of the actual space to determine the color and various functional settings, decorating a beautiful bathroom is not a difficult thing, So what problems should be paid attention to in the decoration of 100 square meters of bathroom?

The toilet will be planned to the bath bomb heating, the route of the lamp, and the water pipe into the wall, etc., in order to be fast, and will be more convenient to achieve the consequences of growth space, some hydropower reforms are also indispensable, in the decoration process, the toilet can be carefully planned. What needs to be grasped is that the more hydropower renovation the better, it is enough to be convenient, and the hidden location can be considered not to stop entering the wall for disposal, and saving money does not affect the elegance.

The water heater is best installed on the load-bearing wall and is robust. It is better to leave a satisfactory open space between the two ends of the water heater and the wall to facilitate maintenance; The washbasin countertop should be of moderate size and height (h75-85cm depending on height), and the undercounter basin is easy to clean.

100 square meters bathroom decoration washbasin:

1. Waterproofing of the bathroom.

The first thing to pay attention to in the bathroom is waterproofing, because this is a place where water is handled. The bathroom is waterproof, and the surrounding walls need to be painted at a height of not less than 30 cm; If there is a shower, the height of the waterproof paint applied on the installation of the shower faucet and the adjacent wall should not be less than 150 cm, preferably about 180 cm. After the waterproofing is done, a closed water test should be done.

After the bathroom waterproof paint is brushed, it is necessary to put tiles on it, so it should be painted with cement-based waterproof materials. The advantage of cement-based waterproof material is that it can be bonded with the cement base layer, its adhesion is very good, and it will not shell after pasting the tile. Other (non-cementitious) waterproofing materials are prone to shelling, which can cause wall tiles to fall off.

2. The color of the bathroom.

In terms of color matching, the color effect of the bathroom is composed of walls, floor materials, lighting, etc. The color of the bathroom is preferably a cool color with a sense of cleanliness, and it is advisable to match the same color and similar colors, such as light gray tiles, white bathtubs, cream-white washbasins, and light yellow walls. You can also use clear and simple warm colors, such as milky white, ivory yellow or rose red walls, supplemented by similar colors and simple patterns of flooring, under the soft and diffuse lighting, not only to make the space have a wide field of vision, double the warmth, but also to become more elegant and clean, pleasant and refreshing.

Black with gold, representing mystery and nobility, plus glass, marble, mirrors, through the light to scatter a little starlight, even more golden, extraordinary. In addition, the bathroom boldly uses black and white super large elements, which appear clear, simple and clean, and is decorated with green plants, which can add a lot of vitality.

3. Anti-slip of the bathroom.

Bathroom attention is the ground non-slip, for everyone's safety, we must choose the protruding pattern of non-slip floor tiles when we buy bathroom tiles, this kind of floor tiles not only have a good waterproof function, and even in the case of water, after decoration will not be too slippery.

4. Toilet circuit safety.

The bathroom is a place with heavy humidity, and it is quite dangerous if the circuit is not safe. Lamps and switches are best equipped with safety features. Joints and latches must also not be exposed. It is best to set up the switching power supply outside the bathroom to avoid leakage due to moisture.

5. The ceiling of the bathroom.

Bathroom ceilings can be based on different shapes, a variety of materials can be selected, such as flat tops can be PVC gusset plate, aluminum gusset plate, plastic aluminum plate, with light steel keel. The dome and other artistic ceilings can be used to choose a softer waterproof board, soft board, plastic aluminum plate, or decorated with a variety of colored glass.

Although the bathroom area is small, but the function is very powerful, not only to provide people with the function of washing, but also to provide people with the function of shower, high-quality bathroom environment will improve people's quality of life, make people happy, then, how to decorate the bathroom design.

The bathroom will use a lot of water, so the bathroom decoration must be waterproof, so that there will be no wall seepage, which not only affects the daily life of the owner and his family, but also brings trouble to the neighbors, the bathroom should not only do a good job of waterproofing the ground, but also do a good job of waterproofing the wall, so as to have a better waterproof effect.

The bathroom environment is relatively humid, so it is necessary to do a good job of ventilation in the bathroom, which is conducive to keeping the bathroom dry and healthy, because good ventilation can not only dehumidify, but also avoid problems such as mold in the bathroom.

There will be water splashing on the ground when the bathroom is in use, so the waterproof tile is the ideal decoration material for the bathroom floor, and at the same time, for the safety of the owner and his family, the tile also needs to have non-slip performance.

Bathroom floor drain is used for drainage, there are many types of floor drain on the market, the owners should carefully select, in order to prevent the floor drain from emitting peculiar smell, you can choose a water-sealed floor drain, and at the same time, in order to smooth drainage, the bathroom floor should be designed with a certain slope as the center of the floor drain, but the owners should pay attention to grasp this degree.

BathroomWhen decorating, it is necessary to pay attention to the closure of the pipe to be soundproof, there are some complex pipelines such as sewer pipes in the bathroom, among which the main sewer pipeline is connected to all the outlets of the bathroom, and the sound of "whooshing" sewer will affect life and sleep. Therefore, when wrapping the riser, it is necessary to insulate the riser and reduce noise.

When decorating the bathroom, we should pay attention to the treatment of the sunny part of the brick, in the final analysis, it depends on the level of the worker. If the plasterer has a good level and the tools for grinding tiles are better, you should not hesitate to choose the practice of grinding at a 45-degree angle.

If you choose to use a bathtub in the bathroom, you need to determine the type of product in advance, because for example, a jacuzzi or a steam bathtub needs a power supply and a reserved circuit. And the power of the bathtub is different, the type requirements for the wire are also different, and some must use 4 square millimeters of wire.

I think it should be a socket, the bathroom is a place where water is often used, and the environment of the bathroom is also relatively humid, so the socket switch of the bathroom should be installed with a waterproof cover, and a socket should be reserved in advance next to the toilet. ‍‍

I think we should pay attention to the water heater, and pay attention to several details when installing the water heater in the bathroom, first of all, the location of the water heater, choose a certain height on the beam, and secondly, the position of the water heater installation should not affect the door of the bathroom. ‍‍

The bathroom needs to be installed with a water heater and a four-piece set, and it is recommended to install the water heater independently from others, using a 4 square line, so that it is safe to use in the future. So be sure to pay attention to the wires. ‍‍