-
First, seal the balcony first.
For the sake of drainage, the ground of the balcony is generally high inside and low outside, but it must be installed horizontally when sealing the balcony, so many decoration masters will choose to seal the balcony first, so that the master of tiling can refer to the lower edge of the window to flatten the tiles.
Second, paste the tiles first.
The first tile must be leveled using a level, and then according to the horizontal line for tiling, in the process of tiling, not only to avoid the gap under the tile but also to pay attention to paste a waterproof slope.
So which of the two is better? According to the research of the old driver, the decoration of the balcony part is generally sealed first and then tiled, which has 5 advantages:
1.More beautiful: because the balcony needs to be expanded or slotted and other actions to damage the wall, so that it can be better repaired when tiling.
2.Waterproof is better: when the developer is constructing, the plane of the balcony cannot be horizontal, and the sealing balcony must be horizontal, otherwise when pushing and pulling in the future, there may be a bad situation, so there must be gaps in the window and balcony surface, so it is necessary to play silicone waterproofing, if it is a rear tile, it is possible to cover the large gap, so the waterproof will be better.
3.Safety issues: It is better to prevent such incidents from falling and injuring people during the renovation period, or causing danger to workers when working on ladders.
4.Material protection: In case of bad weather, construction materials or decorative surfaces need to have a dry environment.
5.Balcony paint, tiles, and carpentry seams are easier to size.
-
Seal the balcony first: During the construction, the developer takes into account the problem of balcony drainage, so the ground of the balcony cannot be horizontal, and there will generally be a gap of a few centimeters, and when sealing the balcony window, it is necessary to install the horizontal, otherwise the movable sash of the balcony window may not be closed tightly and pushed and pulled because the balcony window is not level.
Therefore, when sealing the balcony first, the door and window master first installs the frame of the balcony window according to the horizontal line, and the master of the tile can put the original non-level ground, according to the lower mouth of the balcony window, and then the master of the tile sticks the inside and outside tiles, and then installs the balcony window glass, so that the overall performance of the balcony window is good and more beautiful.
However, it is worth noting that the master who applied the tiles must be asked to fill the gap under the balcony window with high-grade mortar, otherwise it will be easier to seep water.
Paste the tile first: when pasting the tile first, you must use the level to find the horizontal line out, and then paste it according to the horizontal line, and it should be low on the outside and high on the inside, and a drainage slope should be pasted out, and the mortar under the tile must be high, and it should be solid, and there should be no gaps, so that the tile is not easy to seep water under it.
After the tile is pasted, you can seal the balcony, install the balcony frame, seal it with waterproof and weatherproof glue inside and outside, and finally install the glass, so that you can basically do it foolproof.
-
Many houses have balconies sealed in advance, and tiles are pasted when moving in and decorating.
Some old houses have been tiled earlier, and when changing the closed balcony, they often have to be greatly changed, which is very inconvenient.
It is best to seal the balcony first for the decoration of the house, and then paste the porcelain tiles according to the situation to achieve the whole.
-
1. If the owner wants to use the balcony as an indoor space or as a comprehensive space, and does not involve wind and rain that causes indoor water to damage the floor, you can paste tiles first and then seal the balcony; The premise is that the tiles of the railing and the ground should be set aside for about 10 cm, in order to seal the balcony at that time, install the profile frame.
2. Seal the balcony first, and then paste the bricks in the decoration process is more reasonable, considering the beauty, easy to operate, the waterproof effect will be better, and the later decoration will not be too troublesome.
-
In the long run, it is more appropriate to seal the balcony first, because sealing the balcony is actually a process of installing windows, if the window is not installed well, it will be troublesome to leak wind and rain when moving in later, which is very bad, if the balcony is sealed first, it can better ensure the horizontal and vertical of the window frame, if the window can not do the horizontal effect, it is easy to become more and more inclined in the later stage, not only the aesthetics are not good, but also people are very uncomfortable to look at.
There is also if the tile is paved first, because the tile itself has thickness, plus when the tile is paved, the bottom also needs cement for bonding, the worker's paving technique is different, it will cause the thickness of the ground to be uneven, when sealing the balcony, it is very likely to cause the size to grasp the size and waste, the window frame can not be installed in the very troublesome, if the gap is too large, it will leak air and not sound insulation, the impact is very large.
And seal the balcony also needs to punch and other steps, if the tile has been paved, then the dirt of the hole will cause damage to the ground tile, and there may be cracks and other conditions of the tile, the consequences outweigh the loss.
Another advantage of sealing the balcony first is that after the balcony is sealed with sealant, after the tiles are paved, it can also be sealed twice, so that the sealing is stronger, and the problem of water leakage in the later room is not easy to occur, and the sound insulation effect will be better, so that cooking kills two birds with one stone.
-
The decoration of the house should first seal the balcony, and then put tiles, which is the correct decoration process.
-
The decoration of the house must be put on the balcony first, so that the balcony can be sealed to do a lot of basic decoration in the interior, such as tiles, including some walls, some decoration, if the balcony is not sealed, it will lead to a certain amount of chaos in the interior decoration, which will be damaged.
-
The decoration of the house must be sealed first, because the order of decoration is the outside first and then the inside. After the balcony is treated first, then the interior tiles are pasted.
-
Generally, it is necessary to paste the tiles first and then seal the balcony, because the tiles need to be dried when the balcony is not sealed, the wind can come in, which can make the indoor tiles better.
-
The installation of windows and tiles during the decoration of the house belong to some of the construction projects, but because the tiles and windows have mutual influence, it is necessary to achieve the order of successive implementation during the decoration, so as to ensure that both can be completed in order, and do not affect each other, and can achieve the integrity required for decoration.
Tile or window first?
For the construction sequence of tiles and windows, it is necessary to install the windows first and then lay the tiles, only in this way can the decoration construction process requirements of the two and the integrity of the finished product construction, so the construction sequence has certain reasons and advantages.
The reason why the windows are installed first and then the tiles are laid.
Safety: The window must be fixed to the wall part of the hole, and for the current window, many of them use the installation parts, the fixing point is on the inside of the window, if the tile can not be fixed first, then only rely on foam glue and other auxiliary fixation, its firmness can not be guaranteed, then there are potential safety hazards, so we must first install the window, fix it firmly, and then pave the tile to fix and hide it in the tile, so that the window can be safe, and it is also a requirement for safe use.
Aesthetics: One of the points of replacing the window is aesthetics, since aesthetics are required, then it is necessary to make the handover part of the window and the tile more beautiful, so in this case, you must install the window first, and then lay the tiles, as long as this can show the most beautiful integrity of the finished product of the window and the tile.
-
The decoration of the house should first seal the balcony, and when the balcony is closed, many of them are dirty work, and then paste the tiles after finishing it first to avoid getting dirty.
-
Of course, it is better to paste the tiles first, and then seal the balcony after the tiles are pasted. And it is more convenient to disassemble when the time comes.
-
1. Seal the balcony first, and the level must be required when it is closed, so some masters will choose to seal the balcony first;
2. Paste tiles first, and must be leveled according to the horizontal line to paste tiles;
3. From the point of view of waterproofing, the balcony can be covered with large gaps when tiling in the later stage, so it is recommended to seal the balcony first.
See the detailed answer.
-
The balcony is decorated and sealed after the wall tiles are pasted. Generally, aluminum alloy is used to seal the balcony, and the gap between the aluminum alloy and the wall can be sealed with sealant after the installation is completed, so the tiles are pasted first, and then the balcony is sealed.
-
Seal the balcony first, and then put tiles. In this way, it can cover the gaps caused by sealing the balcony and will be more beautiful.
-
When decorating the house, it is necessary to seal the balcony first, and then paste the interior tiles.
-
Seal the balcony first and then paste the tiles, it has two major advantages:
1. It is more beautiful. Because sealing the balcony requires expansion screws or slotting and other actions to damage the wall, so that it can be better repaired when tiling.
2. Waterproof is better. When the developer is constructing, the plane of the balcony cannot be horizontal, and the sealing balcony must be horizontal, otherwise when pushing and pulling in the future, there may be a situation where it is not easy to push, so there must be gaps in the window and balcony surface, so it is necessary to play silicone waterproofing, if it is a rear tile, it is possible to cover the place with a large gap, so the waterproof will be better.
-
Seal the balcony first, do it behind the tiles.
The waterproofing of the walls and the waterproofing of the gaps of the steel windows must be done well, otherwise, they will collapse. It is also very important that the exterior window sill should be angled downwards so that dust does not accumulate easily, and water will not be deposited in the rain.
It is best to open the upper and lower windows so that the room is ventilated.
Otherwise, many people look at the entire wall of window glass, but the upper half is sealed, and the lower half can only be opened on one side, which is really chicken ribs. It is not breathable and ventilated, it is hot in the summer, and the air is terrible in the winter.
-
Under normal circumstances, the decoration of the house is to seal the balcony first, and then tile the indoor ground after sealing the balcony.
-
Decorating a house must be done first with a large category of projects around the split-screen balcony and then start to paste porcelain tiles and cut tiles, which is a relatively complete process and sequence.
-
To decorate the house, you should first seal the balcony, and then put tiles, so that the tiles will be more regular.
-
It must be the balcony first. Because the balcony is not sealed. It has an impact on the overall decoration. First of all, the balcony should be sealed first. The interior needs to be decorated little by little to maintain the basic common sense of this decoration.
-
To decorate the house, you should seal the balcony first, and then paste the tiles, so that the bricks and tiles will be more regular.
-
The decoration of the house is still sealed first, and the balcony is tiled after sealing, which will look better and the decoration effect will be better. And it looks more comfortable, and the effect of sealing the balcony is also good. It will not cause damage to the tiles in the later stage.
-
Seal the balcony first, and then paste tiles synchronously with the interior, which is easier to level and more conducive to forming a whole.
-
If you choose to paste the bricks first, then you must use the relevant appliances to level, and then follow the horizontal line to paste the bricks, and at the same time should ensure that the outside is low and the inside is high, paste a drainage slope, and the mortar under the tiles must be high, and there must be no gaps, so that the tiles are not easy to seep down, and the balcony can be sealed after the tiles are pasted.
Generally speaking, many construction personnel take into account drainage matters when operating, and the surface of this area cannot be horizontal, and must be placed horizontally when closed, otherwise there may be a situation where the balcony windows are not closed tightly due to imbalance, so some masters will choose to seal the balcony first, and the door and window master will first install the frame of the balcony window, and the tile master can flatten the original non-level Dubai according to the lower mouth of the balcony window.
-
House decoration is a big thing, before the decoration should be considered how to do each step, many people will first learn about it online, rather than blind decoration, which not only has obvious results, but also can save money. In the southern city, most of the house balcony is open, many people will choose not to seal the balcony, so that the line of sight is better, but there are potential safety hazards, then, the balcony decoration first tile or seal the balcony first, what is the particular?
1. When the balcony is decorated, the balcony should be sealed first, so as to save money.
In fact, I still have more say in the steps of balcony decoration, because I have renovated two houses, and I have worked in a decoration company and have a lot of experience in decoration. First of all, I think the balcony must be sealed so as to avoid mosquitoes from running into the room, and families with children are not prone to accidents. The balcony also needs to be tiled, so that the long-term rain will not have an effect, and it is very good, take care of it, and live for many years, it is like a new year.
After sealing the balcony, you can glue as many tiles as you need, so you can save money. After all, we have to be careful in the decoration of each house, otherwise, this is a few hundred yuan more, that thousands of dollars, which is a lot of expenses.
Second, sealing the balcony first will also make the wall more tidy and will not damage the tiles.
Sealing the balcony is a big project, not just talking, there may be hidden dangers if you don't do it well, such as the size of the guardrail, the size of the glass must be measured, if the tile is installed first, then the expansion screw should be played in the later stage, there are many small workers who punch the technology are not so good, if you play on the original wall, you can use the tile to make up for it in the later stage, but if you have pasted the tile, and then play, it may make the tile damaged, there are many cracks that are very ugly, and it may also be when it rains, let the rainwater penetrate in, In many cities in the south, the weather is relatively humid and rains more frequently, so it will not take long for the house to become moldy.
When carrying out interior decoration, we usually carry out the construction of the ceiling first, and then the tiling is laid. This sequence is mainly based on the convenience of construction and the consideration of the overall effect. >>>More
The normal situation is to paste the tile first, because now basically the door needs to be customized, if the tile does not have a store sticker, its size can not be determined, so it needs to be tiled first. If the size of the door is measured without the tiles being paved, there will be a gap after waiting for the door to be installed, and it is easy to make mistakes in the size, which will affect the construction schedule. >>>More
It doesn't matter who has the first and who can do the following, but, the footline and the wallpaper have the order, one to do the foot sweeping is the baseboard you are talking about, and then paste the wallpaper, because the size from top to bottom is fixed by the baseboard, so as to determine the length of the wallpaper.
In the process of home decoration, the sequence of processes is very important. It is actually incorrect for workers to put tiles first and then thread wires. Because in the decoration process, the laying of wires needs to be carried out in the wall, if the tiles are pasted first, then when the wires are worn in the later stage, it is necessary to destroy the tiles that have been pasted, which will not only increase the difficulty of decoration, but also increase the cost of decoration. >>>More
Bathroom decoration is good with tiles first; If the toilet is installed first, it will affect the laying of tiles, which will also cause waste of materials, if the tiles are then laid, so that the tiles can be cut according to the size of the toilet, and it will not affect the appearance and will not cause waste.