How to quickly knock off the floor tiles, how to pry up the floor tiles

Some of the floor tiles are sticky firmly, some are sticky and loose, if they are sticky loose, you can know if there is a gap by gently tapping the sound with a small hammer, only loose, the method of cutting the groove can work, but if you still want to keep the floor tiles, it will be difficult, cut the groove, you can keep it, and if you can't keep it, destroy it, as long as the floor tiles are destroyed to create a similar level, because the interior needs to be leveled. Re-laying you want to lay wooden floors or plastic floors, the house floor height is not high, plastic is more suitable, a square plastic floor of 28 yuan is millimeters, a square of about 50 is millimeters thick, durable, and there are various flower shapes of imitation marble, our offices and shopping malls are used with this, now many families also choose plastic flooring, plastic flooring has no radiation, marble and radiation, wooden floors have smell, so, you look at the choice.

Use a hammer to break the corner of the tile first, and then use a chisel to make it much easier, if you have the conditions, you can rent an electric hammer, it will be very easy, a day will be a dozen yuan, go hehe.

Use a brick knife to start from the side and hit the brick knife with a hammer

It's better to find a worker to do the work outside that has a special knock on these things ! They have special tools, as long as the price is negotiated you don't have to worry about pulling!

With iron prying, it is impossible to think too quickly, and you still have to knock it piece by piece

Floor tiles can be smashed with a hammer or mechanically removed.

For example, using an electric hammer.

Or rhinestones, tile scrapers, etc., when dismantling, it is necessary to do a good job of protection, and remove the items that need to be kept in advance and store them.

After the floor tiles are removed, the ground needs to be cleaned before proceeding to the next step of construction. Destructive demolition is recommended to have a professional for construction. If it is badly damaged, replace the entire tile.

In the gap between the broken tile and the adjacent tile, the cutter cuts the strip seam, the depth is at least about one centimeter, in order not to destroy the tile that is not damaged, you can go a little into the gap. Shake with a hammer and the tile will leave the ground, and if it is firm, use the drill to remove it little by little along the edge.

Pry open with a chisel.

If the floor tiles are hollow, then you can use a rubber hammer to gently tap them, add water on one side until the edges are loose, and then use a rubber cone to pry them from all sides. If you need to replace the floor tiles with new ones, you should pay attention to knocking out a layer of concrete under the floor tiles after knocking out the old floor tiles, so that the new floor tiles will not be higher than the position of the old floor tiles.

How to pry up the floor tiles:

To first remove the white cement on the edge of the tile with a pen knife (or other blade), and then use a cutting machine to cut about 3 cm into a reduced square along the edge (need to cut the tile), and then use a hammer to carefully knock the cut edge open, remove, save the hammer to knock the whole surface loose, pay attention to the tiles next to it, be careful not to touch. Then use the chisel to slowly warp it.

Floor tiles, also known as floor tiles, are a kind of ground decoration materials. It is made of clay firing. A variety of specifications. The quality is firm, the bulk density is small, the pressure is wear-resistant, and it can be moisture-proof. Some are glazed and have a decorative effect. It is mostly used for the ground and floor of public buildings and civil buildings.

Floor tile cutter, cut the area to be smashed around the perimeter.

1) If it is only semi-loose, it cannot be removed, otherwise it will cause the brick to be damaged, and it will also affect the replacement of the brick. The tiles can be broken from the center of the tile, then removed one by one and the loose bricks removed before the spare bricks can be replaced.

2) By pouring the slurry to deal with, the mud mixed with glue penetrates into the bottom from the brick void, so that the loose brick is fixed, but this method can not completely solve the problem of loosening, and it will still be loose after a long time.

3) The situation of full loosening is relatively rare, and the disposal method is also relatively simple, only need to take out the loose brick body, do the corresponding cleaning work on the paving base floor, and also use auxiliary materials such as tile adhesive to prevent the floor tiles from loosening.

The first detail requirement is that we must sweep the dust off the ground before we lay the floor tiles. The most standard practice is to rinse the floor with water to ensure that no dust is present.

The second detail was to pour a layer of cement mortar on the ground before paving the cement mortar. The so-called cement slurry is a thin slurry material made by adding a large amount of water to the cement. The entire floor is then poured to the brim, which enhances the bond between the ground and the cement mortar and avoids hollowing.

The third detail requirement is that when we use cement mortar to pave floor tiles, we generally need to apply cement mortar on the back of the tile, or pour cement mortar on the surface of the cement mortar layer. Both of these methods are to enhance the adhesion between the tile and the bonding material, which must not be forgotten.

The fourth detail requirement is the treatment of the back of the tile. Whether we are sticking wall tiles or floor tiles, before the tiles are laid, the back must be rinsed with clean water and then set aside to dry. Otherwise, the back of the tile will be dusty or oily, resulting in tile falling off and hollowing.

Knock it off with a hammer.

It will be troublesome to knock out the original floor tiles and do it again. First of all, it will be very troublesome to do waterproofing work after the floor tiles are knocked off, and it must be brushed to the junction with the wall. Secondly, the re-knocked ** is more than twice as expensive as reinstalling a new house, and the water and electricity pipes under the original bricks will also be affected.

You can even consider the practice of directly laying new floor tiles on top of the old floor tiles, and brush tile adhesive on the surface of the original bricks, saving time and energy.

In addition, the house has been lived for a long time, and the floor tiles are prone to problems, so for this, it needs to be well maintained. Because the ** that is re-knocked out and then re-tiled is one and a half times more expensive than the ** of your new house, which is not cost-effective. And also be careful of the water and electricity pipes under the original bricks.

Precautions. The first major effect is that when you walk on top of the tile, you will feel that there is shaking, and the tile is easy to break. Since the lower part of the tile can no longer be in close contact, it gives the impression that the tile is dangerous and prone to cracking.

The second major effect is that the tiles will be uneven. Due to the hollowing of the tiles, the tiles may be lifted after we step on them. After a long time, our entire floor tiles are uneven, and it is very easy to stumble.

The third major effect is that there will be dust in the gaps of the tile hollows. That is, if the tiles in our home are hollow, there will be dust rising when we walk on them. If we mop the floor at home, we will find that the gaps in these tiles are always not clean.

Do not smash, use an electric hammer and chainsaw. When decorating, when encountering a place that needs to be demolished, it is taboo to use the method of smashing. Because the vibration during smashing is not only the part of the damage, but also the parts that do not need to be smashed are shaken, resulting in cracks.

It will also loosen the tiles of the neighbor's house upstairs and downstairs due to the vibration when smashing. Smashing is destructive to the building. Therefore, it is necessary to remove it after cutting with an electric pickaxe or chainsaw.

First you have to find a hammer to get your hands on, then take a deep breath and play to your heart's content!!

Use a percussion drill,,, open a few openings, and then use a steel drill.

If you still want to use the tiles again, you need some patience and skill, if you don't use it anymore, then the hammer and shovel will play to your heart's content.

First, use the floor tile cutter to cut the area to be smashed around, and then use an electric hammer to knock off the area to be smashed!

It is recommended to lay another layer of tiles directly on top of the original tile, which may increase the thickness by 15mm and will not take up much space. However, it is best to knock the original tiles on the wall into patterns so that the cement can be pasted more firmly.

There are many details that need to be paid attention to when renovating an old house, and knocking out the floor tiles can be one of the most troublesome steps. In order to better decorate the house, today we will take a look at how to knock off the floor tiles in the decoration of the old house.

1.Prepare the tools.

Before knocking out the floor tiles, you need to prepare some necessary tools. First of all, you need a series of hammers such as a powerful hammer, hammer head, flat shovel, sledgehammer, etc. In addition, it is necessary to prepare protective tools such as gloves, goggles, and masks to ensure safety at work.

2.Check the ground conditions.

Before knocking out the floor tiles, you need to carefully check the condition of the floor. If the floor tile process is good, it needs to be checked extra carefully to avoid encountering some bricks that are difficult to knock off. Once you've determined the condition of the floor, it's time to start knocking out the floor tiles.

3.Knock off the floor tiles.

When you start to knock off the floor tiles, it is recommended to start from the corners of the floor and choose a loose location of the bricks to knock. When one brick is successfully knocked off, it can be pried up with a flat shovel and then further knocked out the other bricks.

4.Clear the ground.

After knocking out the floor tiles, the floor needs to be cleared to facilitate the next step of the renovation work. At this time, it is necessary to use brooms, mops and other tools to clean the ground in order to carry out the next step.

All in all, although it may be a troublesome task to knock out the floor tiles, it is relatively simple to knock out the floor tiles and clean the floor as long as you pay attention to safety, accurately check the ground conditions, and prepare the necessary tools. In the renovation process of an old house, paying attention to the details of each step and patiently carrying out each work can make the decoration process smoother and more efficient.

After living in the house for a long time, its style and layout do not meet the needs of the owner, so many owners will want to renovate the second-hand house. When renovating a second-hand house, it is usually necessary to remove the wall tiles and re-lay them, so how to knock off the wall tiles quickly? Next, I will briefly introduce it to you.

Traces of the Ombudsman. 1. When knocking on the wall tiles, we need to make relevant preparations in advance, such as preparing tools such as impact drills and ladders; And remove the electrical appliances and decorations on the wall in advance; Furniture near the wall should be removed. When you disassemble it, discuss whether to keep electrical appliances, bathroom appliances and other products in advance, and try not to damage them.

2. Next, you can dismantle the wall tiles, and the wall demolition family and bricks should be heavy down and start to dismantle, knocking from the edge of the tile to the middle. When knocking on the tiles near the switch socket and faucet, the force should be moderate, and it should be knocked down slowly to avoid destroying the water pipe and talking about the high wire. When knocking on the bathroom tiles, pay attention to the waterproof layer, and do not knock off the old waterproof layer; Unless the owner wants to redo the waterproofing layer.

3. When knocking on the wall tiles, we also need to do a good job of cleaning. For example, in the process of tapping, the fallen tiles should be cleaned up in time; Otherwise, it will affect the demolition of the tiles below. After the wall tiles are removed, the construction site needs to be cleaned.

4. Some owners want to directly paste new tiles on the old tiles in order to save trouble, if you use this method to renovate, you should pay attention to the new tiles to choose a thin one, but also will not occupy the indoor space. When pasting new tiles, it is necessary to check whether the old tiles are hollow and whether they are smooth and flat. If the old tiles are uneven and hollow, the old tiles should be pierced off and re-laid, etc.

Summary: About how to quickly knock off wall tiles, I will briefly introduce it to you here. I hope that after reading this article, I can provide you with reference and help when removing tiles in the future.

Hello, to first the porcelain spring brick edge of the white cement with a pen knife (or other blade) to clear, and then use a cutting machine along (need to cut off the old tile) inside about 3 cm into a reduced square, and then use a hammer to carefully knock the edge open, remove, save the hammer to knock the whole surface loose, pay attention to the tiles next to it, be careful not to touch. Then use the chisel to slowly warp it. If the cement mortar is not particularly firm, you can directly use a hammer to pry the flat pry to knock on the gap between the floor tile and the cement floor.

That will pry up the whole floor tile. Such a method is much easier than using a hammer to break the floor tiles from the front.