What should I do if the floor is rotten a lot? How to remedy a rotten floor

What to do with your rotten floor, I because if the floor is rotten, we can smash the floor to the ground, or re-apply a good wooden board to grease it and brush it all over again, so that the floor will not become one.

If the damaged area of the floor is not very large, you can use the way of grinding and painting to solve, wipe it with a dry rag after polishing, if the floor is damaged in a large area, the part of the local damage needs to be re-paved, the process is more complicated, it is recommended to ask professional renovation workers to come to deal with it.

The brick surface is partially uneven, hollow, cracked, etc., and generally needs to be replaced. There are two ways to replace it: one is to carefully knock the tile to be replaced (note that the force should not be too large), and then pry the brick around, remove the brick that needs to be replaced, and repair it again.

If the brick is not pasted for a long time, the cement on the wall is not completely dry, you can carefully pry the cement off, paste it with cement slurry, if it is used for a long time, the cement is completely solidified, you can use special tile adhesive paste (tile adhesive is available in the major building materials market).

Another way is to use a marble machine (a tool specially used to cut tiles) along the diagonal line of the tile, be careful not to scratch the four corners of the tile, from the corner of ten centimeters, and then use a hammer to break the diagonal intersection point (in the middle of the tile), with a chisel from the middle to the surrounding pry, so that the surrounding tiles will not be damaged. After taking out the bricks, you can re-paste them.

Tips: The replacement of tiles needs to pay attention to their color number is consistent, otherwise there will be color difference, so it is recommended to leave a small amount of tiles when tiling for future repair. If you don't keep it, it's best to take the pry off tile fragments to the point of sale as they are**.

For the scratches on the tiles, the glazed tiles can be sanded with fine sandpaper and carefully sanded on the brick surface, which can get some effects. Be sure to do it with water. This method can get a good effect on small scratches on the brick surface.

Vitrified tiles can also be carried out using the above-mentioned glazed tile method. The force should not be too strong; You can also use a polishing machine to add water to polish to keep the strength even, which requires professional operation.

The surface of the solid wood floor is easy to be scratched, especially if some heavy objects or sharp objects fall on the wooden floor, the floor will be scratched, and there will be many fine cracks when the fine sand particles walk on the floor. To prevent scratching the floor, it is recommended that you place a rug at the door to prevent sand from being brought inside. The remediation of solid wood flooring depends on the degree of scratches, if the surface paint film is scratched, it can be treated with polishing and waxing, and it can be wiped clean.

In addition, if the scar is deep, it is filled with solid repair wax, then painted with a touch-up pen, and finally polished. If you find it cumbersome, you can buy a bottle of floor wax and wipe it like a normal mop, and some scratches that are not particularly deep can be dealt with.

The floor is rotten a lot, what to do with the rotten floor? It may be that the floor is rotten due to the wet floor, and the cause should be found and the rotten floor should be replaced.

If most of the floors are rotten, you can only replace them and buy a new batch to put them on.

The floor is so good, how to deal with it, then you just have to warp the floor all over again, and the floor can be better.

If the floor is rotten, it is better to re-specialize if there are conditions.

After a period of use, the surface gloss will fade, and even the traces of damage will appear, affecting the aesthetics of the home environment. How to maintain wooden flooring? Let's take a look!

1. How to remedy a rotten floor.

If the damaged area of the floor is not very large, you can use the way of grinding and painting to solve, wipe it with a dry rag after polishing, if the floor is damaged in a large area, the part of the local damage needs to be re-paved, the process is more complicated, it is recommended to ask professional renovation workers to come to deal with it.

Second, how to maintain the wooden floor.

1. When using the wooden floor daily, it is necessary to keep the wooden floor dry, so in the process of cleaning the wooden floor, a wrung out mop should be used, if the wooden floor is stained with stubborn stains, you can use a neutral detergent to scrub it, and then wipe it dry with a dry mop, and the subject ink and oil stains can be cleaned with a special stain removal oil.

2. When cleaning the wooden floor daily, it is necessary to clean up the residual sandpaper on the ground, so as not to scratch the floor with sand, and when moving the furniture, the shirt god can not directly push and pull the furniture, but to lift the furniture and put it gently.

3. In order to ensure the smoothness of the floor, you can wax the floor every once in a while, preferably twice a year, but the ground should be cleaned before waxing, and then the floor wax should be evenly applied to the surface of the floor, and then a layer of wax should be applied after the first layer of wax is dry, and finally wiped with a soft cloth.

Summary: The relevant content of how to remedy the rotten floor is introduced here, hoping to help friends in need. If the eighth damage area is large and the damage problem is more serious, do not deal with it yourself, and immediately contact the renovation worker to deal with it, so as not to cause the problem to deepen.

1. If it is not serious, please use paint film repair paste to repair;

2. Partial replacement of damaged floors can be replaced with new floors or hidden floors. (Ask the master to chisel up the broken floor tiles and re-lay them, but be sure to pay attention to the color difference and flatness.) ）

3. Repaint after sanding off the paint (the thickness of the surface layer of the floor should be greater than 2mm).

<> if it is a wooden floor, you can repair it with lime powder, pour water into the lime powder, knead it into a ball, remove the broken floor with a tool, measure the size, cut the new floor according to the size, and then put the cut template into the place of the meta template, and finally use a tool to apply the kneaded lime mass around the gap. If it is in line with the floor, you can directly use the paint film repair paste to repair, first apply the paint film repair paste to the damaged place of the floor, and then use a scraper to rub off the excess paste applied outside the gap, and finally polish the paint off the wooden board, repaint it, and wipe it clean with a clean rag after the paint is dry.

If the damage is not serious, it can be repaired with a paint film repair paste. Partially replace the damaged floor, which can be replaced with a new floor or a hidden floor. Sand the paint off and repaint.

It is generally recommended to choose parquet, which has a stable structure and is not easy to be damaged, and its substrate is made of multi-layer veneer, and the wood fibers crisscross into a network of laminated combinations, which ensures the flatness and stability of the wood floor, and can also retain the aesthetics of the solid wood floor. <

1. If the damage is not serious, it can be repaired with paint film repair paste. Partially replace the damaged floor, which can be replaced with a new floor or a hidden floor.

2. Repaint after sanding off the paint. It is generally recommended to choose parquet, which has a stable structure and is not easy to be damaged, and its substrate is made of multi-layer veneer, and the wood fibers crisscross into a network of laminated combinations, which ensures the flatness and stability of the wood floor, and can also retain the aesthetics of the solid wood floor. The substrate of parquet has less requirements for wood, and the economic forest is generally chosen to make full use of wood, which is more cost-effective than solid wood flooring.

Ground decoration is mainly divided into three kinds, namely tile floor, floor floor, floor floor, the performance of each decoration material is different, among which the floor material integrity is strong, the construction is simple, and it is easier to repair if it is damaged. The flooring material itself is wood, with natural textures, and the foot feeling is relatively comfortable, which is spliced piece by piece, so how to deal with a broken piece of the floor? Let's take a look with Qeeka Home experts.

1. How to deal with a broken floor.

There are two types of treatment: repair and replacement. If it is repaired, it is suitable for not serious damage, and it can be repaired with paint film repair paste; If the damage to this floor is serious and cannot be repaired, it can only be replaced, and the bad floor needs to be pried up, and then a new one is laid back, paying attention to the color difference and flatness.

Second, how to maintain the laminate floor.

1. Avoid damage.

In daily life, it is necessary to avoid some metal parts, glass and other relatively hard items from hurting the floor, these items should be properly kept, and at the same time, when using open flames and high-power electric heaters, it is also necessary to avoid direct contact with the floor.

2. Dust removal regularly.

Flooring needs to be vacuumed regularly, because there is a lot of sediment and particles carried from the outside, and if the floor is not cleaned, it will scratch the floor after rubbing.

3. Keep dry.

Laminate flooring has a certain degree of water absorption, if the humidity in the room is high, it is easy to deform, so it is not only necessary to keep the interior dry, but also to maintain a certain degree of dryness.

4. Waxing maintenance.

If you want to ensure the brightness and cleanliness of the laminate floor and the long service life for a long time, you must wax it, and you need to wax it twice a year to ensure that the floor is in a smooth and bright state.

Summary: The above is about how to deal with a broken floor, and how to maintain the composite floor, I hope the content shared can give you some reference, if you want to know more about high tremor, you can **** Qijia information.

The floor at home is a very important part of the home environment, and once the floor is found to be damaged, it needs to be dealt with in time to prevent further damage. In the case of a sudden breakdown of the floor in your home, the following measures should be taken:

1.Determine the damage first: you should first confirm the degree of damage, location and cause of the damage to the floor, so that you can take appropriate treatment methods.

If it is a small area of damage, you can consider dealing with it yourself, such as simple repairs; If the area is relatively large, you need to seek professional help.

2.Do a good job of safety protection: Before the treatment, it is necessary to do a good job of safety measures to avoid secondary damage, such as installing fences or other protective measures.

3.Clean the floor: Clean the floor from debris, dust, and dirt, and be careful not to use excessively sharp props to avoid damage to other floors.

4.Make simple repairs: If the damage to the floor is relatively small, you can do a simple repair yourself. The specific method is to use a wooden pile against the floor, and then use wood screws to fix the floor in contact with the pile on the ground, or use a glued wood chip to splic.

5.Replace the floor: If the damage to the floor is severe, it is best to replace it urgently. Choose the same brand and model of floor stuffing panels, then cut the broken floor, remove it and install a new one.

If the floor at home suddenly breaks, you need to take quick measures to ensure the safety and beauty of the home environment. If you can't solve it yourself, you can seek help from a professional.