The kitchen and bathroom are far away, how to solve the problem of hot water?

Many owners of the community will encounter the distance between the kitchen and the bathroom, which makes it impossible to use hot water immediately, and may have to carry out water and electricity renovation at this moment. Hydropower decoration has always been the top priority of house decoration, and it is a major decoration concealment project, so I will take a look at it below!

Before decorating the hydropower transformation, it is necessary to consider the location of the socket switch, the line of the sewer pipe, etc., and then the hydropower wiring can be based on the ceiling, ceiling or road surface. Whether a decoration team is reliable or not depends on the water and electricity installation project. The rails of the hydropower project done by the good decoration team are neat and effective, and they are generally concentrated on a route, and then radiated in the same part.

In that case, if there is any problem in the future, it can also be disassembled and replaced anytime and anywhere. In the use of pipe materials, PVC pipes are generally used, but copper pipes are also used in more high-end interior decoration.

The route of hydropower projects to take the ceiling or pavement needs to see the expected effect of the cost, and there is no clear provision in China. The length of the line of the hydropower project immediately determines the size of the expenditure for the renovation of the water and electricity renovation, especially the room type where the kitchen and bathroom are far away, and these aspects must be carefully grasped with a sense of proportion. Under normal circumstances, the route of hydropower projects is all horizontal, a line can not turn 2 times, and there are more than three lines in a pipe.

If the ordinary socket is good and the distance from the ground is short, then do the road route, but if it is a power socket with integrated bath bomb ** air conditioner, you can use the top wire. Waterways have always been more injurious, and if they are not done well, they will not only affect the surrounding decorative building materials and furniture, but also have a high probability of short-circuiting the circuit. If the kitchen and bathroom are too far apart, the availability of boiled water can be greatly affected and wasted.

So I've found a number of options for us:

First, the most immediate solution is to assemble the thermostatic faucet, the memory metal in the leader will be prepared in an instant according to the ambient temperature with cold water and hot water, unlike the thermostatic water heater that only gives the water output temperature control, the thermostatic faucet can ensure the temperature control of the tap water.

2. Water heater installation. However, the safety factor of water heaters has been criticized, and you must not choose three no products in the case of choosing water heaters, and it is better to buy them in reliable shopping malls. And install it in a relatively safe part of the home.

3. Or you can also integrate the gas stove with the household water heater, and you can install an electric water heater in the bathroom that is intermittent heating, but this can not meet the many hot water needs for showering**, so the hot water can be drawn from the restaurant kitchen. Or in the family kitchen to apply the small kitchen treasure, shower room water heater installation.

Fourth, only if natural gas is taken into account, then the method of modifying the circulating water pump to make the boiling water continue to flow in the pipeline, maintain the temperature, and prevent the cold water in the water storage pipeline is the method of using electricity, which is slightly more expensive. It should be noted that if the electric water heater of the intermittent heat through-pass shot blasting machine like Xiao Chubao is used, its power consumption is relatively large, and the electric switch cable needs to be replaced during assembly, otherwise it may cause a disaster due to excessive load.

Since the general family uses gas for cooking, it is safe and convenient to install a gas water heater in the kitchen to facilitate the use of daily gas switches. The actual problem is that the bathroom is far away from the kitchen, and users are worried about the long hot water pipes, and there will be more cold water every time they take a shower. If it is an ordinary family with three bedrooms and one living room, it is about 120 square meters.

The distance between the bathrooms is actually not too far, and the cold water is not much, so users don't have to worry about it. If it exceeds this actual distance, it is necessary to consider the problem of cold water, pay attention to the choice of zero cold water model when choosing a gas water heater, this kind of water heater due to the installation of a return water circulation device inside the machine, can be the first cold water in the pipeline, circulation heating, so that the water temperature in the pipeline is always kept in a constant temperature range.

In such a situation, if you want to effectively solve the hot water problem, you can install a gas water heater, and you can directly choose to cook with gas.

You can install another water heater, you can choose to plug in, it is more convenient to use, and many people now use it like this.