How is the Elysee 16v timing right?

Engine timing belts for Elysee cars.

The method is: the intake and exhaust camshaft is turned to a relatively horizontal position, and the crankshaft.

The pulley is fixed to the front cover to complete the Elysee car engine.

The timing belt.

In order to ensure the normal operation of the engine of the car, the engine timing belt of the Elysee car is made of rubber, and different degrees of wear and tear continue to occur with the operation of the car. Therefore, the car driver needs to regularly overhaul the timing system to ensure the normal operation of the engine.

The life of the timing belt is limited, coupled with the bare outside the engine, the surface of the belt begins to age after a long time, cracks, belt slippage and other problems also follow, and the aging and fracture of the belt will lead to the top valve of the engine, serious valves, pistons.

Before disassembling the belt, disc crankshaft, look at the round hole on the camshaft? and put him in line with the pit on the cap of the jar. Take the bolt through the fixation.

The close rows have to be crossed at the same time. Then you make a mark on the crankshaft yourself. (The crankshaft is marked at the gearbox and engine junction, but it is generally not visible.)

He had a 4mm hole in the cylinder, threaded a nail through it, and then disposed of the crankshaft in a small area, allowing the nail to pass through the flywheel disc. So the camshaft is fixed, the crankshaft is fixed. Next, loosen the tensioner and replace the belt.

After installing the new belt, coil the crankshaft and mark it again.

1. According to the BAI mark on the crankshaft timing pulley, the crankshaft is generally required to be at the top dead center of the DU piston of 1 cylinder;

2. The mark on the timing pulley of the installation of the camshaft is aligned with the camshaft, and the position of the two camshafts is aligned with the double camshaft;

3. Install the timing belt chain.

Only the camshaft gear of the engine timing gear is marked, and the rest of the gears are not marked. First, turn the engine so that the cylinder reaches the top dead center. Then assemble other gears except camshaft gears, and see that there is a mark on the machine body, so that the mark of the camshaft gear coincides with this mark.

After that, turn the engine to make it about 22 degrees before the top dead center, adjust the fuel injection pump to make it in a state of just out of the oil in a cylinder, and tighten the screws.

Citroen Elysee Automobile's engine timing belt method is: the intake and exhaust camshafts are turned to a horizontal position, and the crankshaft pulley is fixed to the front cover, and the timing belt can be completed.

Many car owners check their vehicles on a daily basis, and it is likely that they will ignore the timing belt. It is true that the position of the timing belt is not obvious, and even some owners think that the timing belt does not need to be replaced, if it is not replaced for a long time, the consequences of the timing belt breaking may affect the driving safety of the car, the timing belt belongs to the rubber parts, it is also a wear and tear, as the engine movement time is getting closer and closer, the timing belt will be in close contact with the tensioner, working wheel, tensioner and other components wear and age. If the timing belt is broken, the camshaft will not run according to the timing when the engine is running, which is very likely to cause the valve to collide with the piston and cause serious damage.

Tools Required: Wrench.

1. First, use a wrench to loosen the screws on the timing gear to facilitate timing calibration.

2. After that, use the clip to jam the timing roulette. Prevent the roulette wheel from jamming during timing calibration.

3. After that, find the colored chain teeth on the camshaft.

4. After that, align the blue chain teeth with the small round hole on the camshaft. In this way, the proofreading is completed.

5. After that, release the clip that is stuck in the timing wheel, so that the timing is proofread.

The new Elysée is on a timing belt and is replaced every three years with 60,000 kilometers.

The timing belt is an important part of the engine valve system, which ensures the accuracy of the intake and exhaust times by connecting with the crankshaft and cooperating with a certain transmission ratio. The belt is used instead of gears because the belt is quiet, has little variation and is easy to compensate. Obviously, the life of the belt is definitely shorter than that of metal gears, so it is necessary to replace the belt regularly.

The function of the timing belt is to connect the upper and lower, and the upper connection is the timing wheel of the engine cylinder head, and the lower connection is the crankshaft timing wheel; The timing wheel is connected to a camshaft, and there is a cam on this camshaft, and its contact point is a small rocker arm, and the rocker arm generates pressure through the power brought by the timing belt, which plays the role of jacking; The function of jacking the intake valve is to let the atomized gasoline enter the cylinder block, and when the exhaust valve is jacked, it is to let the exhaust gas discharge out of the cylinder block; When the camshaft is concave (note: not a bulging place) touches the small rocker arm at the same time, at this time, the intake valve and exhaust valve are closed, the compression ratio is generated, the distributor is ignited, and the internal combustion starts and generates power.

Hello, the new Elysee is on the right belt, every three years 60,000 kilometers to replace, if you are not sure, please log in to the Baichebao Q&A to find me.