Which step is the best step to do and how to do it?

Hello, different areas have different best times for construction.

In general,Living room, balcony, bedroomAfter the completion of the dust-prone processes such as wall tile painting latex paint or wallpaper, clean and then make tile seams. In this way, the beauty sewing construction is completed, and the home will be basically clean.

Kitchen, bathroomIt is recommended that it is best to use a sewing agent before the ceiling is applied. This is because if the ceiling is suspended first, and then the tile joint is made, there will be a situation where the construction of the joint joint is not complete.

AbsolutelyCabinetsIt must be installed last, otherwise it will be even more difficult to construct after installing the cabinets.

Hope mine can be helpful to you.

First, the floor tiles are better or not.

1.First of all, perfect joints and aesthetically pleasing grout can make tiles more useful. After solidification, the surface is lubricated like porcelain, which has the advantages of high strength and wear resistance.

And it does not stick to stains, the tile joints themselves have good self-cleaning, easy to clean and wipe clean, and it is not easy to hide stains after scrubbing with tiles, which can avoid mold caused by cracks. The beautiful joints are waterproof, moisture-proof, and impermeable, and the gaps in the tiles will never be blackened.

2.Tile grout has a decorative effect, and the new tile grout is composed of high-tech new polymer materials, advanced materials and special additives. Unlike white cement, colored caulk and dry powder cement materials are made up of low-grade pigments, so most tile joints are smooth.

If different tile grouts are paired with different tiles, your home can become more three-dimensional.

3.Sewing agents are more suitable for kitchens and halls. In some markets, tile materials tend to be much better than ordinary colored sealing materials.

Real porcelain glue works well in the kitchen and bathroom, because the kitchen and bathroom are damp and have a lot of oil stains. If you don't want beautiful sewing, the walls and floors will turn yellow after a long time, and the deeper the immersion in oil, the darker they will become, which will seriously affect the beauty of the house and produce a large number of bacteria that affect human health.

Second, the four major construction processes of ceramic tile joints.

1.First of all, it is necessary to prepare sewing agent, silicone rubber gun, fine-grained paper, and building materials and tools such as brushes, first clean the surface of the tile, then treat the gaps of the tile, and then use the American sewing cone to dig out the gaps of the tiles at a depth of about 2 mm to ensure that the sewing agent has enough adhesive area, if the groove is too shallow, it is easy to fall off the sewing agent after fixing.

2.Open the sewing agent first, then load the scrap on the glue gun and extrude it, then put it on the rubber nozzle, and then make the corresponding size cut on the upper part of the rubber nozzle according to the size of the filling gap, and then paste the grain paper at the construction site, and then squeeze the sewing agent into the seam, but pay attention to the size of the control, wait for the air to dry, and then use a knife to clean up the remaining sewing agent.

After the overall decoration is done, you can choose to do beautiful sewing, just do it before entering the furniture.

1.Caulk, also known as caulk, is mainly composed of white cement, trace polymers, and trace antibacterial agents. There are three main types of common caulks: black, white, and gray.

Pressure-resistant and wear-resistant, simple construction withering, and inexpensive. By mixing high-grade pigments with epoxy liquids in proportion, different colors can be prepared as needed to better match the tiles. The self-leveling construction is convenient, the finished product is crystal clear, the color is full, and the sequins effect is particularly prominent, which is suitable for mosaic-shaped tiles, which is unique.

However, because it is a liquid, it can only be used for semi-filled floors, and corners and walls cannot be constructed, so it can be used with other joints.

2.It is recommended that caulking is better one week after tiling. The cement glue underneath the tile has cured and dried, and will no longer shrink.

But bricklayers are generally not willing to wait and will caulk you on the spot. If you can't do it, don't force it. It is best to wipe one meter at a time, the oiliness is an epoxy resin reinforcing agent, and the curing time is about 3-4 hours in summer.

It is suitable for water-based video walls or living room walls, and the waterproof and weather resistance is far less than that of oil. Floor heating has no effect on the sewing agent, and the sewing agent has good resistance to high and low temperatures. Excessive humidity, exposure to water, or excessive humidity can cause discoloration or decreased adhesion, blistering, etc.

3.Too much dust can lead to reduced adhesion or blistering; Oil contamination can lead to a decrease in adhesion. Tile paving is a construction project with high technical content, it is impossible for workers to pave each tile intact in the whole process of paving, and the joints can maintain the overall uniformity, which is conducive to the coherence of tile paving.

After choosing the right color, put the glue into the special material tube, then install the special glue gun, squeeze it first, squeeze out the 30g glue in front, and let the glue fully mix and evenly bridge the spike.

4.Caulking should be as perpendicular to the tile surface as possible. When walking forward, the speed should be even.

At the same time, it is necessary to control the strength and frequency so that the glue flows out evenly. Generally, the suitable temperature for construction is 5-38 degrees. Epoxy sand is very similar to ceramic caulk, both are made of epoxy resin, except that it adds quartz sand on the basis of tile agent.

Its presence, which turns the bright light into a matte finish, has more texture, satisfying the needs of veterans who prefer simplicity and low profile. With better quality caulk, cost-effectiveness and durability can be guaranteed. In places where there is water and are prone to dirt (kitchen, bathroom, living balcony), choose a beauty agent.

1. Do beautiful sewing when decorating the bathroom.

It is generally recommended to finish the sanitary seams when decorating, and about a week after the bathroom tiles are pasted, at this time the tiles have been dry, and the gaps are clean and dust-free, which is the most suitable for beautiful seams. The curing time of the oil-based sewing agent is faster, and it can be used normally after curing, and there is no need to fall off and turn white under the shadow of the moisture vapor of the fiber. Big things.

2. After the bathroom is used normally, it is sewn.

If the bathroom has been in use for a long time before you want to make a beautiful seam, you should first test the moisture level of the tile gap and use a dryer or heat gun to dry the seam. At the same time, avoid using the toilet during construction, do not step on the tiles before the seam is cured, do not wash the floor with water, and keep the toilet dry and ventilated until the seam is completely cured.

With the improvement of people's living standards, everyone has higher and higher requirements for the delicacy of the house. Most people will caulk the tiles after the tiles are laid in the house. Therefore, the beauty sewing industry is gradually emerging, and the beauty sewing agent not only sets off the appearance of the ceramic tile, but also adds a sense of delicacy to the overall design, and is also more stable and easy to clean, mildew and black.

Before the sewing, it is very important to choose a color that is suitable for the color of the tiles in your home, and a good color matching can greatly enhance the beauty of the interior, so how to choose the color of the tile in your home? Today we're going to talk about that.

Light-colored tiles are of the same color.

The overall effect of light-colored tiles is relatively simple, so try to choose the same color beauty sewing agent to match, so as not to destroy the overall beauty, give people a refreshing and elegant beauty, and the overall paving effect is more coordinated.

Applicable decoration style: modern style; Pastoral style; Jane European style.

Bright tiles with close colors.

If the same color of the tile is selected, it will cause a large area of discomfort of bright color. The beauty sewing agent with the opposite color will be too jumpy visually, destroying the subjectivity of the bright tile. Therefore, the near-color beauty sewing agent is the best choice, which not only increases the color harmony, but is not too high-key.

Applicable decoration style: European style; Mediterranean style; Urban style.

Dark colors must be reversed.

Dark tiles should try to choose "reverse color matching", because the dark color itself is relatively dull, if you choose the same color or near color, it will make the love home lack of vitality and more old-fashioned. Therefore, dark-colored tiles are generally matched with the opposite color of the seam, and the light-colored seam is used to decorate the dark color, which is suitable for the shade and full of beauty.

Applicable decoration style: new Chinese style; European classical style; Industrial style.

Versatile tri-colour grey**.

If you have difficulty choosing, the all-purpose gray, white and silver three-color beauty sewing agent is your best choice, and these three colors have high adaptability. Whether it is paired with light, bright or dark colors, it does not contradict the harmony.

Applicable decoration style: all.

Did you get the beauty sewing skills shared today?

The color matching of ceramic tile seams is very important, and good seam products are also very important.

Dajiang beauty sewing series products, formaldehyde-free, non-toxic, water-resistant and mildew-proof

Make your beautiful home safer and more comfortable, and make your life and your family's life healthier!

Put the sewing agent mixture on the tube and cut it into a sharp flat shape with a knife. Press the handle of the extruder against the gap in the tile. Retreat at a constant speed.

Apply the sewing agent evenly to the gaps. 2. Press evenly with a seam ball. Completely separate the excess sewing agent from the sewing agent in the gap so that it can be better separated after drying.

3. When the surface is dry and the hardness is hard, use a shovel to remove the excess sewing agent on the edge.

Grouts can not only fill the gaps in the tiles, but also increase the aesthetics of the interior. So, how to sew beautifully? Next, let pchouse introduce it to you.

1. First of all, we will put the sewing agent into the glue gun, and then slowly and forcefully beat the material into the fine seam, usually lay a road between meters, and then use a wooden wedge to block the tool mouth, and then immediately use the fingers to scrape the sewing agent flat to complete. However, be sure to pay more attention to the overflow on both sides of the brick joint, and be sure to use a moist sponge to scrub it.

2. When the above process is completed, a gap of one millimeter deep can be directly reserved. But before construction, be sure to use a brush or rag to clean up the dust or other stains in the gap, and then paste masking paper on both sides of the gap, the distance of the masking paper is about millimeters, and then it is completed by punching it along the gap.

3. Another step is that after the above operation is completed, if the construction is already about one meter, it is necessary to immediately use your fingers to apply evenly. In addition, it should be noted that when the masking is not completely solidified, that is to say, when the construction is about one meter, the masking paper must be torn off immediately, and if it is not torn off in time, it will bring a lot of trouble.