How to prune the monstera is too high, how to prune the monstera

Due to the fast growth rate of this plant, the leaves grow too dense or the branches are too tall. In fact, the best thing to do is to prune off some useless branches. Here's how to trim it.

1. Trimming Notes:

1.Since the average plant has only one growth point, it is not suitable for pruning. But if the branch with one main stem on the plant has grown to 3 cm thick, and there is already a bud pack on the stem, then we can prune it.

2.Do not use scissors for pruning tools, if you use scissors to trim, its wound will be difficult to heal.

2. Method: 1Prune the whole tree. If the cultivated plant is already densely grown, then we can prepare a relatively fast knife to cut off its leaves and branches at a distance of 2 to 3 cm from the base of the plant.

2.Truncation. Use a knife to cut off the branch that is too high at the top.

If this pruning method is used, the nutrients will be dispersed from the top to the bottom, so that the leaves will grow denser than before, and the plant will be more beautiful, but at the same time, it will be necessary to pay attention to the problem of long stems and leaves.

3.Plastic. Sometimes the plant will grow crooked, and after it grows crooked, it will lose its original beauty, and then we need to shape it.

You can take a sharp blade and cut off the excess load-bearing side buds of the plant, and tie the main stem with a little strip of cloth for a while to let it return to its upright state.

4.Prune useless leaves. Some plants that have been growing for a long time will have withered leaves and diseased leaves.

These leaves left here will only consume nutrients and cannot bring visual enjoyment, so we need to cut these leaves in time. Just cut off these leaves with a knife.

5.When repotting, you can cut the taproot a little short and replant it so that it will not grow as tall.

In winter, you should prune the branches of the monstera frequently, so that it can continue to sprout new shoots and make its posture more beautiful.

Whole plant pruning: Cut the leaves and branches 2-3 cm at the base of the rhizome of the monstera. Topping Processing:

Use a sharp knife to cut off the branches that are too high at the top to promote the germination of new leaves. Pruning: Cut off the excess side buds on the monstera and straighten the main stem with a strip of cloth.

Precautions: Pay attention to apply disinfectant to the wound after cutting to avoid breeding germs.

1. Prune the whole plant

When the growth of domesticated monstera becomes very lush, it is necessary to prepare a pair of clean, sharp gardening scissors, and cut the leaves and branches 2-3 cm from the base of the rhizome of the plant, so as to facilitate the formation of thick rhizomes of the monstera, and the cut branches and leaves can be propagated by cuttings.

2. Truncation treatment

During the maintenance period, you can also use a sharp knife to cut off the branches that are too high at the top, and when this pruning method is adopted, because the nutrients will be dispersed from the top to the base, the plant can be prompted to germinate too many tender green branches and leaves, and keep the plant round and beautiful.

3. Pruning and shaping

In the case of uneven light, the plant will lose its original aesthetics, and it needs to be pruned and shaped immediately, you can use a clean knife to cut off the excess side buds on the monstera, and use a strip of cloth to straighten the main stem to restore its upright posture.

4. Precautions

If there is only one growth point, it is not suitable for excessive pruning, otherwise the growth of the plant will become weak, and even die, the appropriate state of pruning is that the main stem grows to 3 cm thick, and the branch has grown bud packets, pay attention to apply disinfectant to the wound after cutting.

Monstera pruning steps:

Tools: Fruit shears.

1. Prune the whole plant, when the monstera grows too densely, use a sharp blade to cut off the leaves or branches at the base 2-3 cm.

2. The top of the monstera can make the leaves of the plant grow more densely, and the plant shape is beautiful and symmetrical, but attention should be paid to prevent steep growth.

3. In order to make the monstera plant stand upright, it is necessary to subtract the excess side buds.

4. Control the height of the monstera, do not let it grow arbitrarily, and often prune the top buds of the stems or branches.

5. Cut off the aging monstera leaves in time, and cut off the dead and diseased leaves of jujube yards in time to avoid consuming nutrients.

6. When changing pots, you can cut the taproot short, and the plant will grow relatively low after replanting, so that you don't have to worry about the monstera growing too tall.

Turtle back bamboo introduction

It is a plant of the genus Monstera in the family Araceae, climbing shrub. The stems are green, stout, with pale half-moon-shaped leaf traces, circumferentially ring-shaped, smooth, 3-6 m long, 6 cm thick. petioles green, often up to 1 m long, ventral flattened; Leaves large, contoured heart-ovate, 40-60 cm wide; midrib and lateral veins green; There are 8-10 pairs of secondary lateral fighting shirt veins, gradually moving upward, and the leaf veins of grade II, III, and IV are reticulated.

Not obvious. The inflorescence stalk is 15-30 cm long and 1-3 cm thick. The bracts are thick leathery, broadly ovate, scapholid, nearly erect. The berries are pale yellow, with bluish-purple spots around the stigma, 1 cm long and mm thick. The flowering period is from August to September, and the fruit matures after the flowering period of different years.

The methods of pruning of monstera basa include topping, controlling high and promoting clumps, pruning side buds to reduce consumption, pruning taproot shortening, repairing old withering, re-pruning overwintering new branches, and pruning branches and leaves with poor growth to save nutrients.

1. Topping control is high and promotes clustering.

In the early stage of the growth of monstera, it is necessary to set up a frame in time to tie and set the shape. When the plant grows to a height of 20-30 cm, topping is carried out. Promote the branching of the monstera, so that its leaves grow densely, and the plant shape is beautiful and symmetrical.

The indoor space is limited, and when the growth of the monstera is too high, which affects the overall aesthetic effect of the base, it is also necessary to carry out topping to make it unable to grow tall wantonly.

2. Prune the side buds to reduce consumption.

As the monstera grows, many side buds will grow, and the whole plant appears bloated and scattered. At this time, it is necessary to remove the excess side buds to ensure that the monstera plant can grow upright. Monstera grows very fast, and if the branches are too dense, Lu Hui not only consumes too many nutrients, which affects the development of the plant, but also hinders the appearance.

3. The taproot is cut short and repaired.

If you are always worried that the growth of monstera is too high and affect the appearance, you can properly cut the taproot short when changing pots. After replanting in this way, the growth of the monstera plant will be relatively low. At the same time of changing the pot, it is also necessary to remove the old roots, excessively long stem nodes and yellow leaves in time, so as not to affect the normal growth of the plant.

4. Re-prune new branches for wintering.

In fact, monstera can also bloom. If you want to bloom more often, you can re-cut it before the winter dormancy period. This not only helps the plant to reduce nutrient consumption and safely survive the dormant period, but also helps to germinate new shoots, enrich the branches, and increase the amount of flowering in the next flowering period.

5. Prune the branches and leaves with poor growth to save nutrients.

When pruning the monstera, you can cut off the branches and leaves that cannot grow normally and grow poorly to help the plant save nutrients, and you can also cut off the branches and leaves that grow too densely to improve the ventilation between the plants.

Monstera is not a plant suitable for more pruning, but usually when it grows densely, the whole plant can be pruned, the stems and leaves above the root of 2 3cm are all removed, and the side buds should be pruned off if there are too many side buds.

When you find that the growth of monstera is too vigorous, you can choose to prune the whole plant, and use a sharp knife to cut off all the stems and leaves above 2 3cm at the root of monstera, so that monstera can re-accumulate nutrients and grow new branches and leaves.

There are too many side buds on the monstera, which will make it look bloated and unsightly, and the excessive side buds can be directly removed to avoid the consumption of excess nutrients, and can make the monstera more upright, and the plant shape will be more beautiful.

How to prune the monstera that grows too tall, you can top it and pluck it, remove the top bud on its top, and prune the branches and leaves that are too tall and too long, so that its growth height can be kept within the appropriate range.

Every time you repot the monstera, you can also prune its taproot, cut the taproot short to make it dwarf and cute, and the overall growth height can also be effectively controlled, which can prevent its growth from being too tall and unsightly.

Usually, after finding that there are diseased leaves and yellow leaves on the monstera, it is necessary to use a knife to cut off these damaged and unhealthy leaves in time, which can reduce the consumption of nutrients by the branches and leaves, and can also effectively prevent the breeding and infection of pathogens, so that the monstera can grow healthily.