How do I install the newly arrived bottled water on the water dispenser?

Bottled water is generally picked up with the left hand first, and the bottle body with the right hand. Hold the bottle head in your left hand and lift it firmly with your right hand. Look at the water dispenser and put it in the water dispenser.

When drinking bottled water, you should also pay attention to the following issues.

1.Drink it within 7 days, and the shelf life is generally 3 months.

The shelf life of bottled water is the most easily overlooked.

Every time a water delivery worker comes to the door, few families pay attention to the production date and expiration date of the bottled water, and accidentally drink "expired water". Generally speaking, the shelf life of bottled water on the market is about 3 months, and the shelf life of some companies' products is 1 month, so bottled water can easily expire.

In addition, experts also recommend that bottled water should be drunk as soon as possible, preferably within a week. Some families have a small population, and it is no problem to drink it in 8-10 days. Bottled water has been left out for a long time, so it is best to boil it and drink it.

2.Clean once every 3 months, and it is best to boil drinking water in the office.

Water dispensers have vents that can bring in microorganisms and bacteria; At the same time, the water contains a small amount of mineral sediment, and the water dispenser is easy to form scale after a long time. Therefore, water dispensers need to be cleaned regularly to avoid microbial growth and scale deposition, and to keep the water clean and hygienic. Water dispensers are generally cleaned once every 3 months to 6 months.

Cleaning water dispensers not only has to be cleaned, but also must be professionally disinfected, cleaning with dish soap alone is not enough, you need a special cleaning agent (chlorine dioxide disinfectant) for cleaning the shop. It's best to call a water delivery shop and have a professional come to your home to clean it, and it's best to let go of some water before drinking it.

It should be noted that many office water dispensers are often not cleaned, and it is best to cook the water before drinking.

In addition, many people only pay attention to the internal health of the water dispenser, forgetting that the water outlet is also very important. The water outlet is the place where there is the most frequent contact with the outside world, and it is also the place where scale is most likely to form. It is recommended that the outlet has scale, and it is best to replace it again, which can be solved for a few dollars.

3.Water dispensers should be protected from the sun.

In addition to paying attention to cleanliness, the placement of water dispensers is also related to water quality. In addition to keeping the environment dry and clean, the place where the water dispenser is located must be cool and protected from light, and must not be exposed to direct sunlight. If it is really difficult, add a dark-proof bucket sleeve to the bottled water.

In direct sunlight for a long time, "moss" may appear in the bottled water. This "moss" is called green algae, the oldest single-celled plant, not a bacterium. Chlorella spores are mixed with the air into the water, and mineral water and mountain spring water have mineral nutrients, and when exposed to sunlight, photosynthesis is produced, and green algae will multiply in large numbers.

Therefore, water dispensers should be placed away from the sun, and cleaned and disinfected regularly.

All you need to do is peel off the label on the lid of the bucket and plug it into the water dispenser instead!

You only need to tear off the security sticker to install it, and you don't need to remove the blue cover. The method of putting bottled water into the water dispenser is as follows:

1. First prepare bottled water.

Second, then observe the top of the bucket, to align this seal with the sharp column of the water dispenser, the blue sleeve has no effect on the installation of bottled water.

3. Put the bottled water horizontally, and remember that the point of the seal should be on the top.

Fourth, then seal the position of the water dispenser and quickly put it up.

Fifth, this can be used to fill the bottled water dispenser.

Align the middle point of the bottled water with the small pillar of the water dispenser, and after alignment, pour the bottled water onto the water dispenser. The following describes the specific operation method, first prepare the materials: bottled water, water dispenser.

4. After alignment, put the bottled water on the water dispenser.

Use sticks, chopsticks, or pliers that are commonly used at home, and pry them out by holding one side of the handle of the pliers about 1 inch above the small opening of the lid.

1. Prepare bottled water for drinking.

2. There is a layer of plastic wrap and sealing paper at the mouth of the barrel.

4. Peel off the plastic cover and sealing paper to expose the lid of the barrel, and you can see a small hole inside.

5. Align the concave hole of the bottled water with the water inlet of the water dispenser and insert it.

6. Put the bottled water and the water dispenser in a straight line, and you can drink it.

Here's how to load bottled water onto a water dispenser:

1. Carry a bucket of water to the water dispenser and place it vertically, not horizontally.

2. First tear off the packaging film of the bottled water bottle, and then find the center point of the bottle mouth, and the recessed place in the middle of the bottle mouth.

3. Generally, there will be a small pillar where the water dispenser puts bottled water, find this small pillar.

4. Align the center point of the mouth of the bottled water bottle with the small column of the water dispenser.

5. After alignment, put the bottled water on the water dispenser. <>

No need to open it. Here's how:

1. First of all, there is a circle of plastic around the outlet of the bottled water, and there is a round plastic stuck at the outlet at the outlet, and this plastic has an arrow.

2. Use your hands or scissors and other tools to pull or cut the plastic outside where the arrow is located.

3. There is a place where you can pull it by hand, pull it apart with your hand. At this time, you can see that there is still a layer of unopened opening of the bottled water.

4. Lift the bucket and fill the bottled water into the water dispenser, and it will be opened.

5. If you need to remove the lid of the bucket after drinking, you can take a round wooden stick with a diameter of about 1cm or the handle of the pliers commonly used in the family to pass through the small opening in the middle of the lid about 2 3cm, and pry it up.

6. If it is a disposable barrel lid, it is a one-time molding integrated cover, the top is pasted with a heat sealing film (certificate), this style of cover can not be used repeatedly, after drinking water, the bucket needs to replace the lid, with a diameter of about 1cm round wooden stick directly in the small mouth of the barrel lid to pry it up.