How do you install a bucket of water on top of a water dispenser?

The hollow cone service dispenser is the most critical core technology for bottled water. The invention of the hollow cone servant dispenser has an intriguing story of "necessity in chance". In order to seek a practical and reliable technical solution for flexible packaging liquid extraction, the relevant technical personnel have paid unimaginable blood, tears, bitterness and tenacious perseverance.

Fifteen years ago (1995), someone began to study the technology of taking liquid from bottled water, and in the desperate situation where various plans were difficult to work, the pencil in his hand rushed to the water bag that had been attacked for a long time! However, with this venting slap, a miracle happened! The water bag in the slab turned out to be:

Stand still and not leaking"!In order to verify the inevitability of accidental action, several pencils were plunged into the water packet one after another.

The verification shows that the technical scheme of "hollow cone direct liquid extraction" is established! Its mechanism:

When the cone is inserted into the ductile membrane, the insertion point of the membrane is expanded into a circle by the penetrating body, and the combination of the contraction force and the reaction force of the ductile membrane material tightens the penetrating body and makes it leak-proof. Discovery and invention are a kind of necessity in chance, and it is the result of perseverance in the pursuit of science. The simple technique of "hollow cone direct extraction" can no longer be simple, and the case of getting rid of the shackles of habitual thinking and standing out has verified the scientific phenomenon of "necessity in chance".

Tips: Water is the source of life, and the amount of water you drink in hot days in summer has also increased a lot, so do you know how many days the shelf life of bottled water is? In the reporter's investigation, it was found that the shelf life of bottled water given by the water station was 5; However, under normal circumstances, 5 days can not be drunk, experts suggest that bottled water after opening is easy to cause secondary pollution, and it is recommended that drinking bottled water should not exceed a week.

Just pull down the tab with your hand, and open it with scissors if you can't pull it off.

You only need to tear off the security sticker to install it, and you don't need to remove the blue cover. The method of putting bottled water into the water dispenser is as follows:

1. First prepare bottled water.

Second, then observe the top of the bucket, to align this seal with the sharp column of the water dispenser, the blue sleeve has no effect on the installation of bottled water.

3. Put the bottled water horizontally, and remember that the point of the seal should be on the top.

Fourth, then seal the position of the water dispenser and quickly put it up.

Fifth, this can be used to fill the bottled water dispenser.

Align the middle point of the bottled water with the small pillar of the water dispenser, and after alignment, pour the bottled water onto the water dispenser. The following describes the specific operation method, first prepare the materials: bottled water, water dispenser.

4. After alignment, put the bottled water on the water dispenser.

Use sticks, chopsticks, or pliers that are commonly used at home, and pry them out by holding one side of the handle of the pliers about 1 inch above the small opening of the lid.

1. Prepare bottled water for drinking.

2. There is a layer of plastic wrap and sealing paper at the mouth of the barrel.

4. Peel off the plastic cover and sealing paper to expose the lid of the barrel, and you can see a small hole inside.

5. Align the concave hole of the bottled water with the water inlet of the water dispenser and insert it.

6. Put the bottled water and the water dispenser in a straight line, and you can drink it.

No need to open it. Here's how:

1. First of all, there is a circle of plastic around the outlet of the bottled water, and there is a round plastic stuck at the outlet at the outlet, and this plastic has an arrow.

2. Use your hands or scissors and other tools to pull or cut the plastic outside where the arrow is located.

3. There is a place where you can pull it by hand, pull it apart with your hand. At this time, you can see that the mouth of the bottled water is still open.

4. Lift the bucket and fill the bottled water into the water dispenser, and it will be opened.

5. If you need to remove the lid of the bucket after drinking, you can take a round wooden stick with a diameter of about 1cm or the handle of the pliers commonly used in the family to pass through the small opening in the middle of the lid about 2 3cm, and pry it up.

6. If it is a disposable barrel lid, it is a one-time molding integrated cover, the top is pasted with a heat sealing film (certificate), this style of cover can not be used repeatedly, after drinking water, the bucket needs to replace the lid, with a diameter of about 1cm round wooden stick directly in the small mouth of the barrel lid to pry it up.

Here's how to load bottled water onto a water dispenser:

1. Carry a bucket of water to the water dispenser and place it vertically, not horizontally.

2. First tear off the packaging film of the bottled water bottle, and then find the center point of the bottle mouth, and the recessed place in the middle of the bottle mouth.

3. Generally, there will be a small pillar where the water dispenser puts bottled water, find this small pillar.

4. Align the center point of the mouth of the bottled water bottle with the small column of the water dispenser.

5. After alignment, put the bottled water on the water dispenser. <>