What problems should I pay attention to when cleaning wood floors? What kind of cleaning solution is

Problems to pay attention to when cleaning wooden floors, the cleaning solution used: if the home is dry, the mop can be wet, a basin of water on the radiator or humidified with an air humidifier, after the paving is completed, it is best to polish and wax immediately. In normal use, polishing and waxing every 3 months is sufficient.

In fact, it is okay not to beat, but frequent polishing and waxing can maintain the smoothness of the floor and increase the service life of pure solid wood flooring. Minimize the contact of wooden floors with large amounts of water; Prevent scrubbing with acid, alkaline and alkaline liquids to prevent the smoothness of the surface paint of the wooden floor. To prevent sharp utensils from scratching the road surface, there is no need to throw cigarette butts on the floor or directly place things that are too hot, to avoid dragging heavy furniture, wooden floors are heavy in daily use, and it is easy to produce germs, so daily life should often use vacuum cleaners to clean wooden floors.

Also, try not to forget to use a vacuum cleaner with a filter. This type of vacuum cleaner can be used to remove the waste that can be seen to be too harmful for micro-split-headed larvae. It can make the back wooden floor very clean, which is good for health.

What is the common way to clean wooden floors: Scrub wooden floors with a dry towel or rag. This method is the way we clean the wooden floors the most in our daily life. In order for the wooden floor to reach a certain level of cleaning, the wooden floor must be waxed first.

However, the number of waxing of the wooden floor should not be too frequent, and the waxing of the wooden floor should be appropriate. The purpose of wax is to avoid moisture in the body, avoid damage, improve surface brightness, and make it easy to clean. Waxing too often will cause damage to the wooden floor, often waxing will also lead to the overlap of the waxing layer, and dust will also be produced in the middle of the waxing layer, which will endanger the actual effect of waxing.

In fact, if we accidentally touch the oil stain, we should not rush to mop the floor. Since the oil stains may be dragged to various places, they cannot be obtained after drying. When oiling, you can add salt to the wall.

Until the grease melts in the salt, scrubs with a paper towel, and finally mops the floor with a brush, it is very clean, and the maintenance method of the wooden floor has been learned for more than ten years, and the wooden floor is as shiny as new.

Precautions for cleaning solid wood floors:

After opening the window for ventilation, pay attention to cleaning the floor, if you find dust or gravel, you should vacuum and clean it immediately.

The ash on the floor should not be treated with a damp rag and a mop, and the ash and gravel wrapped in it are easy to cause scratches on the surface of the floor paint film; Do not expose the floor to an open flame or place a high-power electric heater directly on the floor, nor do you place a hot object such as a boiling kettle or stove directly.

In case of stubborn stains, you should use a neutral cleaning solvent to wipe and then wipe with a wrung out cotton mop, and be sure not to use organic solvents such as alkaline solvents to scrub.

Use a semi-dry mop and disinfect it promptly. A mop with a lot of moisture can damage the floor. If there are bacteria on the floor, clean them up promptly. Bilk Franc cleaner. This cleaner can effectively protect the floor.

When it comes to choosing the right cleaner for the floor, I personally like Velux very much, the cleaning effect is still very good, and the main point is that it does not hurt the wooden floor.

Cleaning liquid can be used to clean wooden floors, reason: because wooden floors are particularly afraid of moisture, so every time the floor is cleaned, first sweep the indoor dust with a soft broom, and then change the dry towel or squeezed mop to wipe and mop. It is best to spin a towel or mop dry before drying it, and it is best to mop the floor when it is air-dried.

If there is dirt or stains on the wooden floor, wipe off the area where the dirt is about to be touched with a towel dipped in detergent or rice washing water, and then replace it with a semi-dry mop to mop the total area.

In order to avoid the growth of bacteria on wooden floors, it is best to vacuum the vacuum cleaner on time, and it is best to choose a vacuum cleaner with a filter, so that the dust and germs of the floor can be managed very cleanly and completely. In the end, in order to better maintain the cleanliness of the wooden floor, it is best to wax the floor every once in a while, which can not only maintain the wooden floor, but also have the effect of saving effort, time and effort during ordinary management. In fact, the wooden floor is very simple to remove and clean the service method, what is the sandal, the sole is a soft toothbrush cloth sandal, you can also manage the wooden floor by the way, so that you usually only need to manage the place that has not been moved for a long time.

Usually vacuum cleaner or broom to clean the surface dust, and wipe the surface of the wooden floor with a towel or mop that is drenched and dried until it does not permeate. After mopping the floor, try to open the window door to let the gas flow smoothly and dry the wooden floor quickly.

Floors must be washed regularly to avoid scratches. Do not use a stiff brush when cleaning the floor, as toothbrush bristles can damage the surface of the wooden floor. Do not let all the liquid stay on the floor for too long, so as to prevent the environment from polluting the road surface and destroying the wear layer of the wooden floor.

Every once in a while, the wooden floor should be completely cleaned. If the wooden floor looks dirty and has mud stains, it should be cleaned with a mixture of water and vinegar. However, do not use vinegar as a cleaning agent as it is corrosive and can damage the surface of the wooden floor.

If bubble gum dirt occurs on the ground, it must not be forcibly removed by a means of corners, which can make the ice hard bottom and then gently scrape it off.

OK; Because if you use cleaning liquid, you can clean the wooden floor very well, and you can also maintain the floor with cleaning liquid.

You can use it, but don't use alkaline cleaners, as alkaline cleaners are harmful to the floor. Due to the chemical reaction of certain components in the wood with alkaline substances, the deterioration of solid wood flooring.

If you use floor cleaners, you need to know how to use them correctly. Do you need clean water to mop the floor after floor cleaner? Let's take a look.

First of all, you need to mop the floor with clean water after using a floor cleaner. Although the surface of the floor looks very clean after the application of detergent, there are still many chemicals left on it, so it must be mopped with clean water again. After using detergent products to mop the floor, you also need to do a lifting chain to mop the floor with clean water, which can remove the chemical residues in the detergent.

Before mopping the floor, you can use brooms, vacuum cleaners and other tools to clean up the dust and hair on the ground, so that the mopping floor is cleaner. In addition to using floor cleaner to clean the floor, you can also use rice washing water, laundry detergent + water, white vinegar + water, salt + water to mop the floor.

The floor is easy to be stained with various stains, and some stubborn stains are difficult to mop clean; If the milk is expired at home, you can pour the milk on the stain and wipe it clean with a rag after a while. If the floor is stained with noisy oil, we can also use table salt to clean it; Everyone also pours salt on the stain, and after a while, wipe the shirt with a cloth repeatedly.

1. If it is a copper faucet, if you want to clean the electroplating surface, you can use boiling water and dish soap to scrub, or you can directly use some strong detergent to remove oil and stain.

2. For scale and rust on the faucet, you only need to wipe the surface with a damp cloth or sponge dipped in a little special detergent, and then dry it with a clean rag or rinse it with water.

3. Dip a soft-bristled toothbrush in toothpaste or wipe gently with a scouring pad dipped in toothpaste to remove scale and oil, and make the surface of the faucet clean and bright.

4. Many people only pay attention to the surface of the faucet when cleaning the faucet, but in fact, the inside of the faucet is more important.

If the water output from the faucet decreases or the water outlet forks, it may be caused by a clogged aerator.

The aerator can be removed, soaked in vinegar, cleaned with a small brush or other tools, and then reinstalled.