What to pay attention to when waxing and polishing solid wood floors, and why should the floor be wa

1. The wooden floor of the basketball court should not be waxed.

There are strict requirements and regulations on the surface of the coefficient of friction of sports wood flooring, if the ground is raised, the newly installed floor should also be waxed, maintenance? Not really. The surface of the board is too smooth, and the athletes in the process of sports, due to the low friction coefficient, can easily lead to foot slippage, which affects the normal performance of the competitive level, and may also slip and fall accidents in serious cases, so the maintenance of the sports venue that has just ended can not be waxed.

2. Paint the wooden floor of the basketball court.

The wooden floor of the basketball court should not be waxed, but the wooden floor of the basketball court can be painted with anti-corrosion protective paint. Professional sports wood flooring manufacturers will not only purchase water-based paint with higher solubility, but also the paint process will not be stolen. According to the actual needs, brush a few times when you should brush it.

Basketball court wood floor painting can protect the wood surface layer and prolong the service life of sports wood flooring, so in order to slow down the rate of wear and tear of sports flooring, laminate flooring anti-slip and abrasion resistance, it is necessary to paint and maintain the wooden floor panels of basketball courts.

Through waxing, the floor itself is isolated from the air, reducing the damage to the material caused by oxidation or contact with harmful substances in the air, so as to prolong the service life of the floor and the purpose of beauty and cleaning.

b. Shake the container with floor wax and stir well. Before waxing the floor of the room as a whole, it is necessary to conduct a partial test in an inconspicuous place such as a corner of the room to confirm whether there is any abnormality. In order to prevent the floor wax from contaminating the wall baseboard and furniture, cover the above areas with adhesive tape, paper, etc.

Soak a clean cloth in floor wax so that it does not drip off. Do not pour floor wax directly onto the floor, as this will cause stains and circles. Apply carefully in the direction of the wood grain of the floor, and do not miss or unevenly thicken.

Applying too little can cause uneven shading, and too much application can lead to poor film formation. Keeping the thickness uniform is the key to waxing.

What to pay attention to when waxing wooden floors?

There are three forms of floor wax, solid, paste and liquid, among which the sales of solid wax are gradually decreasing due to the inconvenience of use, compared with the sales of paste and liquid wax. The main function of floor wax is to form a protective film on the floor, coat, prolong the service life of the floor, and make the floor more beautiful. Take a common floor wax as an example, the main components are carnauba wax, Marseille soap, oleic acid, sodium hydroxide and water.

Carnauba wax is processed from the leaves of the palm tree, which mainly plays a glazing effect; Both Marseille soap and sodium hydroxide are added to formulations as detergents; Oleic acid acts as a regulator to increase the degree of mixing of several substances. Such a set of seemingly simple formulas can protect the floor, prevent scratches, corrosion, and insects.

Before daily maintenance of the floor, the floor should be carefully cleaned, and then the primer wax should be used to dry and then evenly spread the non-wipe high-gloss floor wax all over the ground with a clean cotton soft cloth or wax machine, and after it is completely dry, apply 1 or 2 layers to dry thoroughly. Each wax must wait for the last layer of wax to dry thoroughly before the next layer of wax, and polish it after it is completely dry. If only part of the area is serviced, only the wax is required.

Over time, the wax surface of the frequently active area will be seriously worn out, and the wax layer of the floor needs to be cleaned, which can be done well with the help of wax surface cleaner, and it still needs to be waxed and polished again after the cleaning is completed.

<>1. Clean the surface of the floor. Before waxing the floor, it is necessary to clean up the dust and dirt on it, otherwise it will affect the overall appearance, if there is dust on the ground, you can clean it directly with a vacuum cleaner.

2. Choose good weather for waxing. The environmental factors of floor waxing are very important, generally we choose to do it when the weather is better, try not to choose a rainy day or a time when the temperature is low. If the environment is very humid, there will be white turbidity on the surface of its terrestrial source; If the temperature is very low, the wax is easy to become very hard, so that the floor wax adsorption is very poor.

3. The floor needs to be fully dried. Some floors have stains, you can use a rag dipped in neutral detergent to wipe them off, but you should wring them out. Wait until the water on the floor is completely dry before waxing, especially in the grooved parts of the floor.

If you don't wait for it to dry completely before waxing, then its adsorption will be poor, and the surface will be white, which will also affect the overall appearance.

4. Be cautious when waxing. When mixing the wax, it is necessary to stir it thoroughly, and do not pour the morning baking floor wax directly on the floor, otherwise there will be marks and circles. When applying wax, it should be carried out in the direction of the texture of the floor, and the thickness of the application should be consistent, otherwise it will be very unsightly.

When it comes to waxing wooden floors at home, there are time issues that need to be taken care of. It is best to wax wooden floors on a sunny day, because there is a lot of humidity in the room when it rains. At this time, waxing the wooden floor will produce white cloudiness, and the floor wax will harden if the room temperature is below 5 degrees.

First, remove trash and dust from the floor surface and wipe it with a vacuum cleaner or diluted neutral detergent. Stains that are difficult to remove can be wiped with acceptable water. Be careful not to use chemicals, as this will lead to poor adhesion of floor wax, carefully inspect the floor surface after cleaning, and wax after the water is completely dry.

1.When cleaning the floor, try to wring out a cloth soaked in detergent to prevent detergent from accumulating in the grooves. Before waxing the room as a whole, you can do a partial trial in an inconspicuous place to confirm that there is no abnormality before waxing the whole room.

Then use a clean rag or a special waxing mop to fully dip the floor wax and carefully apply it in the direction of the wood grain of the floor. Don't miss the coating or uneven thickness. Maintaining an even thickness is the key to waxing.

Wooden floors should be waxed at least three times. Wipe the floor with a cloth with no lint or crayons every time to let the wax oil soak into the wood.

2.Everything should be completely dry, especially in the grooves. If it is not dried sufficiently, the floor wax will not adhere tightly to the surface of the floor, which will cause whitening and affect the overall appearance of the wood floor.

Generally speaking, when it comes to waxing floors, you will choose sunny and dry weather to work with. When the humidity is too high on a rainy day, waxing will produce white cloudiness. Therefore, if you want to wax the floor in the rainy season in the south, you must open the window to keep the room dry, but also avoid sun and rain, and wipe it dry when there is water.

3.Waxing still requires a certain amount of technology, and of course, everyone can learn morePractice makes perfect. Good construction conditions must be present before waxing, otherwise the humidity is too high and it is easy to cause turbidity.

Also, don't do it when the temperature is too low. If the temperature is lower than 5 degrees, the floor wax is easy to become less auspicious and hard, and the difficulty of construction is greatly increased. The above is the answer to the question of what needs to be paid attention to when waxing the wooden floor at home.

When waxing the wooden floor at home, there are two points to pay attention to: 1. Try to choose sunny days to wax during the period of rotten work, because the humidity is too high in rainy days, and waxing will produce white turbidity. When the room temperature is below 5 degrees Celsius, the floor wax hardens.

2. Before waxing, you need to use a dry and clean rag to wipe the floor, if you use a rag containing chemicals to wipe the floor, it will lead to poor adhesion of floor wax.

Pay attention to whether the wooden floor at home is damaged and attack the shed, you should understand what kind of material the wooden floor at home is, choose the appropriate waxing material, Pai Kai should polish the floor flat, keep the floor dry after waxing, and also do a good job of polishing.

The problem that needs to be paid attention to is to pay attention to the way of waxing, pay attention to the area of waxing, pay attention to the treatment of cracks and imitation gaps, pay attention to the way of cleaning the floor, and pay attention to the thickness and thinness of waxing.

It is best to choose a rag to wipe it, be sure to remove the dust and dirty mascots on the floor in advance, and pay attention to choosing the right tools for waxing. Pay attention to the waxing technique.

Wood flooring should be second only to ceramic tile decoration materials in decoration, especially the comfortable texture plus the characteristics of warm in winter and cool in summer, favored by many people, but over time, wood flooring also needs to be maintained, which can make the wood floor look more beautiful and increase the service life.

First, the waxing method of wooden floor

First of all, the floor wax should be fully stirred evenly to ensure the quality of the floor wax, you can first use the wood floor wax to test, check the effect, and cover the baseboard and furniture with adhesive tape, which can prevent the pollution caused by the floor wax to them.

Then we use a clean rag to fully soak the floor wax, do not pour the floor wax directly on the floor to talk about the liquid, so that there will be stains and circles.

Then, we apply carefully in the direction of the wood grain of the reed circle on the floor, and be sure not to miss the coating or apply it unevenly. Floor wax can not be diluted with water, waxing tools we can use mop and other convenient operation and very good effect.

2. Precautions for floor waxing

1. Clean up the debris on the wooden floor.

Before waxing the wooden floor, it is necessary to ensure that the wooden floor is clean, and the stains on the floor can be wiped clean by diluting it with a professional floor cleaner.

2. The wooden floor is dry.

Waxing on wooden floors is done only after the moisture on the surface of the floor and the grooves is dry. Depending on the climate, the time it takes varies from one day to another, but generally half a day is enough. If you don't wax the floor, the surface of the floor will be white.

3. Wood floor waxing weather.

When waxing wooden floors, it is necessary to pay attention to the weather, and the humidity of the space is very high when it rains, so that the waxing will produce white turbidity. If the temperature of the indoor space is below five degrees Celsius, the floor wax will harden. So it's best to choose a time when the weather is good for waxing.

4. Waxing and maintenance of wooden floors.

It takes twenty minutes to an hour for the floor to dry. If there is a leak, we must reapply. When using the waxing method twice, we wait for the second application to be completely dry for the first time.

Remember that the floor should be waxed every six months or so, so that the beauty of the floor can be maintained for a long time.

Anyone who has experience in home improvement should know that the wooden flooring at home needs to be repaired and maintained regularly, and floor waxing is the most common and indispensable method, which can extend the service life of the wooden floor. So, what are the steps and precautions for floor waxing? Let's find out together.

Analysis of floor waxing steps.

1. Waxing environment preparation.

If you want to wax the floor, it is best to choose the time when the weather is better, and autumn is the most suitable, and the autumn season is very advantageous for floor waxing. Be sure to avoid construction in the weather with high humidity or low temperature, because too high humidity is easy to have white turbidity, and too low temperature will make the floor wax hard, which is not conducive to construction.

2. Preparation of construction tools and floor wax.

If you are waxing in a large area, you can use a waxing machine, and if you are in a small area, you can use a dust push or soft cloth. In addition, the appropriate floor wax needs to be prepared.

3. Clean the ground.

Before starting waxing, be sure to tidy up the furniture in the area that needs to be waxed and determine the waxing area; It is also necessary to clean the floor area to ensure that there is no dust or other dirt before waxing to prevent the finish of waxing. When cleaning, you can wipe the floor with a wrung out mop or a soft cloth. It should be noted that after cleaning, the moisture on the floor should be completely dry before starting waxing.

4. Waxing. Stir the floor wax thoroughly, dip the floor wax fully with a clean rag or sponge, take no dripping as the standard, carefully apply it in the direction of the wood grain of the wooden floor, do not be too fast, do not miss the coating or uneven thickness, and keep the thickness even.

5. Polishing. Generally, the floor waxing will be done twice, and after the first time, it will be waxed again. Each wax must wait for the last layer of wax to dry thoroughly before the next layer of wax, and polish the surface with fine sandpaper or soft cloth after it is completely dry.

Precautions for floor waxing.

1. The floor should be waxed at least twice, and each time the floor should be rubbed with a cloth or waxer without fluff to let the wax water penetrate into the wood.

2. If you want to make your floor bright enough, then you must use a soft cloth to gently wipe and polish it when you make every floor wax.

3. You can also choose polyesteramine floor wax, brush it three times with a clean brush, and pay special attention to the floor joints.

4. After each floor wax, wait for the spicy to dry completely, polish the appearance with very fine sandpaper, wipe it clean, and then beat the wax a second or third time.