-
will be suspended.
If you find these situations, please improve and replace them immediately.
1. The length of the hose should not exceed 2 meters.
The longer it is, the more likely it is to bend, which will affect the normal use of gas, and the greater the risk.
2. The hose should not be too close to the fire source.
Do not put the gas hose close to the stove surface, so as not to be aggravated by the flame grilling; Do not fold the gas hose to avoid blockage and affect the continuous gas supply.
3. The hose can not be damaged and deformed, and the hose can not be bent, stretched, cracked, damaged and aged, and the household gas hose should be used within the specified service period, and it must be replaced if it is aging, cracked, blistered or damaged.
4. The hose cannot penetrate walls, doors, windows and floors.
Under no circumstances should the gas hose pass through walls, floors, ceilings, doors and windows, mainly because the hose can be damaged within the wall, causing air leaks and not being easily detected.
5. Paper and other items cannot be wrapped outside the hose.
Many people wrap the hose with newspaper, plastic wrap, etc., in order to prevent the hose from getting stained with oil, which is extremely dangerous, and it is easy to ignite the hose if a spark appears.
6. The hose should not have the following conditions.
Marks of rat bites, presence of oil stains, burning, or cracks, bubbles, or damage to the outer rubber layer of the hose.
-
It is best to replace the gas hose once a year to about a year and a half. If the ignition hose is not replaced for a long time, it will deteriorate, produce fine cracks, and even fall off, causing gas accidents.
For safety reasons, the hose of natural gas can not exceed 2 meters, and the hose can not cross the doors and windows, after using the gas, the valve of the pipeline should be closed, and only the stove should be closed.
-
The following are the faults that can cause the hose of a natural gas lighter to fall off.
1. The two ends of the hose are not punched or the clamp is loose.
2. The hose has been used for a long time, and it is aging and cracking.
3. Use inferior hoses that are easy to corrode and age.
4. Failure to prevent the rubber hose from being bitten by rats and scratched by sharp objects.
Introduction to common faults.
If the valve in front of the stove is not opened, it will cause ignition failure, and check whether the valve in front of the stove is opened before ignition. Moving the cooktop will cause the cooktop connection pipe to twist and flatten, or because the gas contains more condensate.
If the air supply is blocked and the ignition fails due to a clogged hose, the fault can be corrected by checking whether the hose is compressed, bent, or replaced with a new hose.
After the gas stove has just been replaced with a connecting hose, due to the air mixed in the pipe, it will cause temporary ignition failure, and the ignition can be successfully achieved by discharging the air in the pipe by igniting it multiple times. If the hose connecting the cooker is old and broken for a long time or if it is not properly connected to the cooker, it will cause gas leakage, so the hose should be replaced or the end of the hose should be tightened with a hose clamp.
If the gas in the stove is not ignited, the gas will smell bad, so open the window for ventilation and wait for the gas to blow away before ignition. Sealing material is dry, depleted, or sealed.
Aging will cause the stove valve to be not tightly sealed and cause air leakage, the sealing material should be replaced until the valve body is replaced, and the valve body should be checked for air leakage after installation.
-
It will not be scalded pro 1, the pipelines connected to the gas stove by natural gas are rubber pipes, which will form aging after a long time, and the hose will become soft, sticking to the air inlet of the gas stove. It is necessary to cut the hose with a knife, disassemble it, and then cut the denatured hose and connect the normal hose to the gas stove. 2. The part of the hose connected to the gas stove should be kept hygienic, and the inspection should be done as much as possible, and the denatured state should be updated in time.
This phenomenon will not happen again. Generally, it is completely necessary to update it every six months or so.
-
There are safety hazards.
In normal times, it is necessary to check the air intake hose frequently for air leakage, and when you smell a peculiar smell, you should immediately close the gas main valve and open the doors and windows. In addition, the hose used to transport gas may crack over time and cause air leakage. If you find a crack in the hose, be sure to replace it immediately, and under normal circumstances, once a year.
Many people often smell a gas smell when cooking, and even hear the sound of "zez", which is caused by gas leakage caused by a hole in the hose of the gas stove. The quality of gas stove hoses on the market is uneven, and consumers accidentally choose hoses with questionable quality, which not only causes gas leakage, but also seriously causes carbon monoxide poisoning, and even **.
Tips for safe gas use
When installing a cabinet-type cooktop, pay attention to the cabinets under the stove to maintain good ventilation, and the cabinets without grille doors should be opened when in use.
Always check whether the hose joints are well fixed, whether the hose is aged or cracked, and remember to close the valve before the indoor stove after use.
When you find a peculiar smell, you should close the indoor gas main valve in time, open the doors and windows for ventilation, and call Hanas customer service **96517 to call the police.
In the event of a serious leak, an alarm should be called outside** to avoid sparks**.
-
It is very important to install and use gas hob hoses correctly, as any negligence can lead to serious safety issues. If you find that the gas stove hose is not plugged deeply, here are some countermeasures:
1. Stop using the gas stove. If you find that the gas stove hose is not plugged deeply, stop using the gas stove immediately and turn off the gas outlet to ensure safety.
2. Check the gas stove hose. Carefully inspect the gas stove hose for rust, deformation, or breakage. If you notice a problem with the gas stove hose, replace it right away from the hood.
3. Make sure the plug is on. When plugging the gas stove hose plug into the gas stove and gas pipe, make sure the plug is not loose. To secure the plug, you can use pliers to gently push the plug inward.
4. Refuse DIY maintenance. If you're not sure how to properly install a gas stove hose, don't try DIY repairs. It is best to use the help of a professional technician to ensure proper installation. Thing oak.
5. Comply with safety regulations. When using a gas stove, please follow all safety regulations, such as not stacking flammable materials around the gas stove, cleaning the gas stove in a timely manner, ensuring that the gas stove is ventilated, etc.
In conclusion, proper installation and use of gas stove hoses is key to ensuring safety. If you find that the plug is not inserted deeply, please take steps to clear the banquet in time to ensure safety. In addition, regular inspection and maintenance of gas stove hoses can extend their service life and ensure safety for long-term use.
-
The hose of natural gas is too long to have no effect on the cooker, of course, it should not exceed ten meters.
-
There is no effect, but it is recommended not to exceed 2 meters.
Natural gas is a flammable, explosive and toxic gas, and the long coal hose greatly increases the probability of cracking and leakage, which affects the safe use of gas.
Article 5 of the General Provisions on the Use of Hoses for Indoor Gas Pipelines in the Design of Urban Gas stipulates that when the gas hose is connected to household gas appliances, its length shall not exceed 2m, and there shall be no interface.
-
The gas hose under the natural gas stove is too long and unsafe, and it is generally required to be no more than two meters, which is unsafe, because the length of the gas hose is generally not more than two meters. It is understood that if the gas hose is too long, it will have a certain impact on the resistance of the intake pipe, which will affect the heat flow of the item. If it is too short, it will pull and eventually the hose will fall off.
2. What should I pay attention to when using gas? 1. Pay attention to indoor ventilation when using gasIn the process of using gas, you must remember to open the doors and windows at home, the main purpose of which is to prevent dangerous accidents. If the door or window in the room is not opened immediately, the oxygen content in the gas will not be sufficient when it is burned, and the gas will not be able to burn completely.
Eventually, when the gas is burned, it will also produce some toxic gases, which can cause poisoning to the occupants.
The brands of gas stoves I know are Boss, Siemens, and Fotile
Be sure to choose a gas stove with stainless steel panels, and at the same time know the thickness of stainless steel, and the thicker the better. The burner must be made of pure copper, and only this material is the best. The higher the heat flow rate on the manual, the better, generally in between. >>>More
Not good. Top 10 brands of cooktops.
1 Vantage (China Famous Trademark, China Famous Brand, Top 10 Cooker Brands, Leading Brand, Zhongshan) 2 Siemens (Top 10 Cooker Brands, World Brand, China Headquarters Beijing) 3 Fotile. China Famous Brand, China Famous Trademark, Top 10 Brands of Cooker, Ningbo) 4 Boss (China Famous Brand, Top 10 Brands of Cooker, Famous Brand, Yuhang, Zhejiang. >>>More
Common sense of gas stove purchase, safety and environmental protection are the selection criteria. >>>More
Gas stove battery replacement is generally replaced at the bottom of the gas stove, a total of three steps can be completed. >>>More