Gypsum board curtain box practice, a curtain box with several sheets of drywall

1 7 step by step reading.

Prepare the materials to make the curtain box. To make curtain boxes, gypsum board, large core board, putty powder, latex paint, adhesive glue, nails and so on are used. If you don't have a large core board, you can use high-density board; There is no putty powder, and quickash powder is also fine; There is no adhesive glue, and adhesive is fine.

Measure the size of the curtain box. The width of the curtain box is generally about 15 cm, the height is generally about 9 cm, and the length is generally directly through the left and right walls of the window. Of course, it can be set according to personal preference, but at least more than 35 cm of window width, otherwise it will not be beautiful.

Renderings of Alibaba curtains, good goods from the source, easy to purchase. Ad.

Nail the big core board. According to the previously measured size, cut the large core board. Fix the inner board of the curtain box with nails on the top of the window wall, then use nails to fix the boards on the left and right sides of the curtain box, and finally use nails to fix the curtain box baffle.

Self-taught painting from scratch, come to Xiaohongshu to read the introductory tutorial of painting, easy self-learning. Ad.

Apply adhesive glue to the top of the large core board. After all the panels of the entire curtain box are fixed, apply adhesive glue to the outer layer of the baffle. Sticking glue should also be applied to the board that fits snugly against the wall. If the curtain box is not close to the wall, the left and right boards should be coated with adhesive glue inside and out.

A set of interior design renderings A set of renderings of high-quality interior design of my picture network. Ad.

Glue the plasterboard on top of the large core board. Drywall is also cut to the previous dimensions. After the glue is applied, paste the gypsum board on the outside of the curtain box baffle and on the boards on the left and right sides of the curtain box.

Do not stick on the inside of the curtain box. If the curtain box is not close to the wall, the left and right boards should be pasted with gypsum board inside and out.

Plaster the plasterboard on top of it. First, mix the putty powder with water and puree, and pay attention to the putty powder mud should not be too thin. Then apply the putty powder to the top of the plasterboard, taking care to be sure to smooth it out. Note that all plasterboard should be plastered with putty and plastered, and it should be smoothed.

Brush latex paint. After the putty mud on the gypsum board is completely dry, brush latex paint on the putty powder. Latex paint should be brushed flat and evenly.

All plasterboard should be painted with latex paint. After the latex paint is dry, brush the latex paint a second time, this time more carefully, more evenly, and more flat.

The bottom board should be made of wood core board or solid wood board

Curtain boxes: Generally speaking, two plasterboards are enough, which is related to the size of the room. Some of the two can not be used up, some to two and a half, gypsum board to make curtain boxes is cheaper, there are more people to choose, the disadvantage is not moisture-proof, can not see the rain, otherwise the deformation is not negotiable, now the decoration is not marked a suite, tens of thousands can be decorated, hundreds of thousands of dollars are also used in the decoration of curtain boxes, aluminum alloy materials are also a lot.

Introduction to the curtain boxThe obvious function of the curtain box is actually to block the curtain track and bed curtain head that are not very good-looking, the curtain rail in the early years is an ordinary slide rail, and the bed curtain head is not as diverse as now, and the curtain box is used with the curtain rail, the purpose is to block the unsightly curtain rail. Concealed and aesthetically pleasing. The curtains at home are all made of rails and roman rods, we will obviously see that the rails and roman rods, no matter how high-quality roman rods you choose, we can always see this lever, which is actually very ugly.

The gypsum board curtain box must find the position of the keel, and the curtain box can be fixed on the keel in order to be forced, and the gypsum board can not bear the weight of the curtain.

First wood keel fixed, splint or paper gypsum board seal, curtain track can be directly fixed on the floor or floor slab with overtime to do the base, and then the track fixed on the plywood, the general curtain box width of 15 cm, the height according to the actual situation to conceal the track can be, the curtain practice is the same. 1 Liked The curtain box comes in two forms:

One is that the room has a suspended ceiling, and the curtain box should be hidden in the ceiling, and it will be completed together when the top ceiling is made.

The other is that the room is not ceilinged, and the curtain box is fixed to the wall, which becomes a whole with the window frame.

2.The specifications of the curtain box are about 100 mm high, the width of the single rod is 120 mm, the width of the double rod is more than 150 mm, the shortest length should exceed the width of the window 300 mm, and the two sides of the window exceed 150 mm, and the longest can be the length of the wall.

If the finish is painted with clear oil, the veneer should be pasted with the same material as the window frame, and the paste surface is the outer side and bottom surface of the curtain box.

The through curtain box can be directly fixed on the wall and the top surface on both sides, and the non-through curtain should use a metal bracket, in order to ensure that the curtain box is installed smoothly, the length of both sides from the window opening is equal, and the line should be played before installation. - 1Liked The construction process of the wooden curtain box.

1.There are two forms of curtain box for construction content: one is that the room has a suspended ceiling, and the curtain box should be hidden in the ceiling, and the other is that the room is not suspended when the ceiling is done, and the curtain box is fixed on the wall and the window frame is set as a whole.

2.The specifications of the curtain box are about 100 mm high, the width of the single rod is 120 mm, the width of the double rod is more than 150 mm, the shortest length should exceed the width of the window 300 mm, and the two sides of the window exceed 150 mm, and the longest can be the length of the wall. If the finish is painted with clear oil, the veneer should be pasted with the same material as the window frame, and the paste surface is the outer side and bottom surface of the curtain box.

The through curtain box can be directly fixed on the wall and the top surface on both sides, and the non-through curtain should use a metal bracket, in order to ensure that the curtain box is installed smoothly, the length of both sides from the window opening is equal, and the line should be played before installation.

1. Positioning and line drawing. When installing the gypsum line curtain box (rod), it is necessary to carry out the center positioning according to the requirements of the design drawing, and play the leveling line and structural relationship.

2. Check and process the embedded parts. After finding the line, check whether the position, specification and embedding method of the embedded fixing parts of the fixed gypsum line curtain box (rod) can meet the installation and fixing requirements, and if it is found that there is an error in the elevation, flatness, center position and distance out of the wall, treatment measures should be taken immediately.

3. Verify the processed products. Check the processed products that have entered the site, and check whether the variety, specification and assembly structure of the gypsum line curtain box meet the design and installation requirements.

4. Install the curtain box (rod).