What kind of floor is moisture proof, and how should the floor be moisture proof

1. Drying of sports wood floors.

In the production process of solid wood sports wood flooring, a professional drying process must be carried out. This art is very important. When the sports wood floor leaves the factory, the moisture content of the sports wood floor should be balanced. How much exactly? It should be adapted to the climate and environment where the stadium is located.

2. Install moisture-proof measures.

Before the installation of sports wood flooring, it is necessary to level the pavement floor of the stadium and do a good job of dehumidification; The sports wood floor installation system should be equipped with moisture-proof membranes, ventilation holes and other moisture-proof accessories; Expansion joints should also be reserved during the installation of sports wood flooring, which can prevent dampness and bulging of sports wood flooring.

3. The humidity in the gymnasium is guaranteed to be between 35% and 50%.

Good external conditions are the basis for the maintenance of sports wood flooring, especially the environment in the gymnasium, and it is best to keep the humidity in the gymnasium between 35%-50%. If the outside air is dry due to the influence of the northern monsoon during the dry winter season, the air humidity in the building will be reduced, so it is necessary to keep the museum closed and reduce air ventilation and convection.

Multi-layer parquet and laminate flooring are more moisture-resistant.

Multi-layer solid wood parquet is made of staggered lamination of boards of different tree species, which overcomes the shortcomings of wet expansion and dry contraction of solid wood flooring to a certain extent, has good dimensional stability, and has better waterproof and moisture-proof performance than ordinary solid wood flooring.

Laminate flooring is generally composed of four layers of materials, namely wear-resistant layer, decorative layer, high-density substrate layer, and balance layer. Laminate flooring is hot-pressed and strengthened to overcome the weakness of dry shrinkage and wet expansion of solid wood flooring, and has excellent moisture-proof performance.

Solid wood flooring is the least moisture-proof, and it is forbidden to use it in places that are too wet.

The laminate wood floor is relatively moisture-proof, and a moisture-proof mat can be laid between the floor and the screed, which can block moisture.

The 3G composite of David's flooring home, the weather in the south is relatively humid, the bottom layer of the board is a moisture-proof and deformation-proof balance layer, the surface is wear-resistant and stain-resistant, I also put a sample floor, put it in the basin and soaked it for a day, and there was no deformation.

1. Quicklime moisture-proof. It can absorb water vapor in the air and turn it into calcium hydroxide, which keeps the indoor air dry. Quicklime will melt after moisture absorption, and should be replaced in time.

2. Light a candle. In the bedroom or living room with flooring, light the aroma to save energy and effectively dry the air, and get out the musty smell in the room. Lighting candles prevents water vapor from condensing, thus reducing indoor humidity.

3. Dried chili peppers, cannonballs, braziers. Place dried chili peppers to absorb a certain amount of water, but be sure to replace them with new dried chili peppers frequently; Place a reliable quality cannonball, because there is sulfur in the cannonball, which can not only dehumidify but also remove insects. You can burn a stove in the room to raise the temperature in the room so that the water vapor cannot condense, thereby reducing the humidity in the room.

4. Enter the door to change shoes. Before entering the door, you should change into dry slippers or dry the moisture from the soles of your shoes to avoid bringing moisture into your home from the outside. At the same time, it is also necessary to develop good habits and pay attention to personal hygiene at home.

For example, do not pour the waste water in the cup on the tiles, step on the soles of your shoes after going to the bathroom and then enter the living room, etc., and keep the tiles dry at all times.

5. Spread waste newspapers at the door. When the damp "Huinantian" hits, in addition to closing the windows of the home, spread waste newspapers on the ground of the "wet entrance" such as the door, bathroom, and kitchen door, which can not only absorb the water on the ground, but also wipe the water on the shoes, killing two birds with one stone.

1. Raise the foundation.

If you live on the first floor adjacent to the ground, raise the foundation of the room above the level when building the house, otherwise the floor of the room will be flooded during the rainy season.

2. Do a good job in toilet water and electricity engineering.

During the renovation construction, workers may cut corners, or usually do not follow the floor drain at the lowest point, after the wall is grooved, the cement is not filled in the gap, which is easy to occur in the bathroom in the future, the phenomenon of water accumulation and leakage, resulting in the floor and wall of the adjacent room being damp and arching.

3. The internal and external walls are waterproof.

The waterproof of the bathroom should be at least 30 cm, and the shower side should be as high as the person; In floored rooms, it is recommended to do waterproofing of the floor and walls adjacent to the bathroom, which is more safe.

4. Test the moisture content before laying the floor.

Before laying the floor, the floor is usually leveled with cement; Cement wet, it takes 28 days to completely harden, when laying the floor, at least one month after leveling, and to measure the moisture content of the ground, generally in 8-10%, otherwise, the floor is easy to get damp and moldy in the future.

5. Spread an extra layer of moisture-proof film.

When the floor is damp, you can lay an extra layer of moisture-proof film, and ensure that the moisture-proof film completely covers the ground, and the gap between the moisture-proof films should be sealed to prevent moisture from rising and eroding the floor. The ground slab must be hit with the keel first, and the moisture content of the keel must also meet the laying requirements.