There is a suspended ceiling on the balcony how to install a drying rack

Many people have always thought that the balcony ceiling is installed first, and then the lifting clothes pole and curtain slide rails are installed, so they have made an appointment for the ceiling installation without installing the lifting drying rack. But the later installation made me feel wrong, in fact, the order of the balcony ceiling and the outdoor lifting drying rack should be installed first clothes pole and then the balcony ceiling. When installing a lifting drying rack, if you want a balcony ceiling, you must first fix it to the ceiling with steel bars to ensure that the length of the steel bars can expose the ceiling by about 1-2 cm.

When the ceiling is finished, the drying rack will be installed on the steel bar, so as to facilitate future maintenance and repair. Suspended ceilings cannot be load-bearing, no matter what method you use, you must use structural load-bearing.

1. The ceiling cannot bear weight, and the drying rack and clothes are very heavy, and must be fixed on the top of the wall (floor, beam and other structures), which is safe.

2. Install first and then hang the ceiling, the wire rope and ceiling parts of the drying rack can be hidden in the ceiling, which is beautiful. If the ceiling is already suspended, it is more troublesome to install a drying rack.

The method of installing a lifting drying rack after the balcony ceiling is installed.

If the ceiling has been suspended, it is more troublesome to install the drying rack, and the method of installing the lifting drying rack after the balcony ceiling is as follows: 1. Remove part of the ceiling, perforate, install, and then restore the ceiling. 2. Reserve steel screws when hanging ceilings, and the drying rack can be fixed on the reserved parts.

Installation sequence of suspended ceilings and drying racks.

1. The plate surface layer in the aluminum gusset ceiling and the original top aluminum gusset ceiling can be disassembled and assembled at any time, so no matter which kind of drying rack is not affected by the installation;

The original top surface also does not affect the installation of the drying rack, but it is recommended to install it after the painting work of the whole room, so as to avoid the paint contaminating the drying rack.

2. The two ceilings of gypsum board and sauna board ceiling cannot be disassembled, but the installation expansion screws need to be fixed on the original top surface, and the installation sequence of intelligent and hand-cranked drying racks is different.

Intelligent lifting drying rack - a hole can be made in the ceiling to install the drying rack needs to be made in the ceiling so that the worker can fix the expansion screw on the original top surface. Because the intelligent lifting drying rack has a very large base, the base can completely cover the hole, so it is not affected.

Hand type drying rack - the base of the manual lifting drying rack is very small before the ceiling is installed, not enough to cover the hole, gypsum board and sauna board ceiling repair is more troublesome, it is recommended to install the drying rack before the ceiling, and when the top gypsum board is latex painted, only the drying rack needs to be protected. Clothes bars – are installed in the same order as manual drying racks.

1. Find the installation position of the hand crank and punch holes.

2. Install the expansion screws on the pulley frame: a total of 4, 2 single pulley frames, 2 double pulley frames, and similarly, install 2 expansion screws on the corner frame.

3. Fix the hand crank with the expansion screw, then tighten the expansion screw with a tool, and tighten the screws on the handle after installing the handle.

4. Thread the steel wire into one of the corners, pass the two ends of the wire rope through one of the double pulley frames, the two wire ropes are parallel and do not be entangled, and pull one end of the wire rope that is worn out from under the double pulley frame to a position close to the hand crank.

Nowadays, many people will install drying racks on the balcony, so can you still install a drying rack on the balcony ceiling, today I will explain it to you.

Since the ceiling cannot bear weight, the drying rack and the clothes are very heavy, and must be fixed on the top of the wall (floor, beam and other structures) to be safe. Therefore, it is generally installed first and then suspended, and the wire rope and ceiling pieces of the drying rack can be hidden in the ceiling, which is beautiful. If the ceiling has been suspended, it can still be installed with a drying rack, but it is more troublesome to disassemble it after installing the ceiling and then installing the drying rack.

The method of installing the balcony ceiling after the lifting judgment is such as the drying rack: 1. Remove part of the ceiling, perforate, install, and then restore the ceiling. 2. Reserve steel screws when hanging ceilings, and the drying rack can be fixed on the reserved parts.

Therefore, there is no need to worry about the problem that the drying rack cannot be installed after the installation of the ceiling, as long as you pay attention to some problems when installing in the later stage. Of course, if you're worried that you're not doing it well, you can also ask a professional teacher to help!

Usually most families in the decoration of the house, will install some ceilings on the balcony, for the aesthetic effect of the balcony, but also for the convenience of drying clothes, will also install some drying racks on the balcony, in such a design, many people will be more entangled, balcony ceiling can also be installed drying racks? Next, let's find out with me!

1. What we want to see is the part of the balcony, the balcony itself does not have any load-bearing problems, but if the drying rack is installed on the balcony, the drying rack has a certain weight, so the drying rack must be installed on the top surface of the original balcony, which will improve safety, and the load-bearing capacity of the floor slab is also relatively strong.

2. The clothes dryer is on the ceiling and below, and the expansion screw is fixed on the balcony ceiling, and the main body of the clothes dryer is hidden in the ceiling, which is more beautiful and tidy, and is suitable for users with low building height, but the later maintenance is more troublesome and the ceiling needs to be disassembled.

3. The clothes dryer is on the lower ceiling, fix the boom cargo bracket through the expansion screws, and then hang the clothes dryer on the bracket, so that the clothes dryer can be installed firmly. This installation method is convenient for later maintenance, and most of the sun rooms are installed in this way.

4. Install the automatic lifting drying rack, the automatic lifting drying rack is fixed on the top of the ceiling by expansion screws, and the balcony ceiling itself does not have a great load-bearing capacity. Therefore, if it is after the balcony ceiling, the automatic lifting drying rack can not be directly installed on the ceiling keel, the best installation method is to pass through the ceiling ceiling decorations, and directly fix the steel wire on the ceiling floor.