What s it like to work in an R D position?

At the beginning, novices did chores every day, weighing or washing instruments, and after a month, they began to learn to play boards, and then they played boards and stability tests every day.

You can't be too anxious about R&D, this needs to be done step by step; Understand why the ingredients are so important and the role of each ingredient in the product; Whether there are any shortcomings or risks in the use of raw materials, and whether there is room for improvement in the product, we must think about it. ‍‍

The professional requirements are not high, but it takes a long time to accumulate experience, even if you are not very strong in chemical knowledge, through a long time of study and accumulation, you can also become a good formulator, see if you are interested in this industry, otherwise it is difficult to persevere.

One person should be used by two people, and then the individual salary will be paid to you. The battery cell R&D post should be more tired, tired is tired, but the growth is still much faster than other places.

Basically, the work to be done in an ordinary laboratory is almost the same, every day is to do experiments, but the experiments are closely related to life.

I belong to the kind of small R&D staff, I can't decide what to do, I can only follow the manager's arrangement, and what I want to do is completely according to the given ingredient ratio. ‍‍

For cosmetics research and development, the company's tasks are not very many, most of the time I find relevant information, design experiments by myself, and finally make products, find people to evaluate the quality of the product, and then improve. ‍‍

Cosmetics researchers, like any other researcher, do experiments. You can design and develop your own direction, but the specific product development still needs to be based on the needs of the market.

After more than ten years of medical device research and development, I feel that there has been more innovation in recent years, but it is far from reaching the level of mass products.

If you major, you can major in chemistry, chemical engineering, polymer, biology, and medicine, and you can have a certain basic theory.

The R&D department has programmers, system analysts, hardware engineers, hardware test engineers, and software engineers. Programmer, as the name suggests, mainly writes programs, which is the basic skill that computer majors need to practice well, and the responsibility of programmers is how to achieve these small pieces better and faster. The skills of a systems analyst require him to know how to write a program, with a focus on how to cut a large project into small pieces that fit the individual, and then organize those small pieces together.

Responsibilities of the R&D DepartmentAssist the department head to undertake the statistical data and preparation of reports for the department's transactional management, and be responsible for the sorting, sending, receiving, classifying, archiving and control of the documents of the R&D department, such as electrical drawings, mechanical drawings, BOM sheets, etc., so that they can be available for reference at any time, and responsible for the management of R&D office supplies and fixed assets.

Responsible for R&D prototype management, including prototype registration, storage, maintenance and sample room management, responsible for sorting out project files, and classifying management, ensuring that the electronic file directory is consistent with the written file, and other daily work attendance, performance, reimbursement, and meeting notice.

The analysis of R&D posts and process posts is as follows:

1) Process Engineer.

It is a job title in an industrial enterprise, and the process engineer is mainly responsible for improving the process level and quality of the company's products. There are many types of process engineers, which are divided according to the direction of work, mainly mechanical process engineers, blind chemical process engineers, manufacturing process engineers, electrical process engineers, etc.

2) R&D engineer.

It refers to a professional worker who is engaged in a certain industry, conducts systematic research and development of something that does not exist and has a certain experience, or a professional worker who improves the existing thing to achieve the purpose of optimization. As an R&D engineer, you must first have a strong sense of curiosity, which is necessary to become a master.

I like new things, I like to get to the bottom of problems, and I have fun to delve into them.

The work content of R&D personnel:

1. Responsible for organizing relevant departments to prepare medium and long-term scientific research plans, new product development plans, and new product development plans according to new product development plans;

2. Organize and lead the research and design of various new products, tooling process design and process management, achieve a reasonable division of labor, fully complete the plans issued by the company, and propose the test and identification of new products to the manager in charge;

3. Participate in the acceptance, and be responsible for organizing the evaluation and recommendation of new product results reporting, conscientiously implementing the national technical policy, ensuring the technical level of new products, and improving the company's economic benefits.

Carry out the air test and experimental research of new products, open and develop and introduce technologies, and collect all kinds of information (new materials, processes, products, equipment, new products, market information, various conferences, exhibitions, and negotiation information);

4. Regularly report to the relevant leaders to evaluate the environment and safety of newly developed products to ensure that there are no problems with the pollution and safety of new products.

Hello, R&D is tired! And the benefits of the high-pressure R&D post are very considerable, but at the same time, it must create benefits for the enterprise, otherwise it will be eliminated, so the pressure is very high, and you must work overtime in order to work, and there must be R&D results! Doing experiments is very tiring, there are no rest days and no working days, only arrange the experimental time by yourself and squeeze out a little rest time.

Each has its own strengths, excellent knowledge, rich experience, good at thinking and solving problems, R & D positions are not tired, and there are many people who are not competent to be tired, a harvest, a pay Description: 1. Responsible for the target market research and development suggestions of the company's first chain of new product development; 2. Collect product information and screen target products or product lines from them; 3. Responsible for sorting out and planning the category structure and strategic planning of product portfolio; 4. Write product planning plans; 5. Cooperate with relevant departments to budget and control product costs; 6. Complete other tasks assigned by Lingyunfeng;

The positions in the R&D department are: programmer, system analyst, hardware engineer, hardwareTest EngineerSoftware engineer.

R&D departmentJob ResponsibilitiesYes:

1. Responsible for completing the company's new production and hunger product development plan.

2. Responsible for the preparation of technical and process documents and inspection standards related to the balance of new products.

3. Responsible for collecting technical data at home and abroad, paying attention to product trends, and providing technical reference for the general manager's decision-making.

4. Responsible for technical process training and technical guidance for the production line.

5. Responsible for the development of new products, adopting new processes, new technologies and new materials to improve the quality of product returns. Programmers are grassroots workers engaged in program development and program maintenance.

Hello, R&D technology positions mainly include hardware engineers, software engineers, algorithm engineers, structural engineering guessers, circuit design engineers, FPGA engineers, test engineers, micro assembly engineers and other positions; If my answer is helpful to you, please give a thumbs up (rate in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. Finally, I wish you good health and a good mood!

Summary. Hello, the positions in the R&D department are: programmer, system analyst, hardware engineer, hardware test engineer, software engineer.

The R&D department is mainly responsible for the development of the company's new products, which requires supporting professional and technical personnel. Of course, the R&D department needs to manage talent and logistics** as well as support staff. Therefore, most of the people in the R&D department are engaged in scientific research occupations, and a few people are engaged in supporting trial production, testing, information services and management and other professional positions.

Hello, the above is the answer I have compiled for you, if my answer is helpful to you, I hope you can give my service a thumbs up Your praise is the driving force for me to move forward, thank you for your support, I wish you a happy life

Hello, the positions in the R&D department are: programmer, system analyst, hardware engineer, hardware test engineer, software engineer. The R&D department is mainly responsible for the development of the company's new products, which requires supporting professional and technical personnel.

Of course, the R&D department needs to manage talent and logistics** as well as support staff. Therefore, most of the people in the R&D department are engaged in scientific research occupations, and a few people are engaged in supporting trial production, testing, information services and management and other professional positions. Hello, the above is the answer I have compiled for you, if my answer is helpful to you, I hope you can praise my service Your praise is the driving force for me to move forward, thank you for your support, hail I wish you a happy life

R&D is how R&D.

The R&D of each company is different, that is, it is mainly the company's development department.

1. Responsible for the company's technical management and market research and product tracking, organize the preparation, revision and improvement of enterprise inspection standards, process drawings, inspections, operating procedures and other technical documents for product technology, incoming materials, processed products and finished products, and issue them to relevant departments to supervise and implement;

2. According to the company's development and market needs, improve existing products and processes, find new raw materials, develop and design new products;

3. According to the needs of the company's development, study the potential requirements of the market and users, and formulate the medium and long-term planning and capital budget of the technology research and development center; Propose research and development directions and research topics in a timely manner, and be responsible for organizing and reviewing the proposed research and development directions or topics to ensure that the topics are forward-looking, operable and realistic;

4. Responsible for the verification of technology, process and quality of new products developed and developed after they are put into production;

5. Responsible for the collection, sorting, analysis, research and summary, archiving and storage of all kinds of technical information and materials, and providing reliable guidance for the gradual realization of the company's sales goals;

6. Assist the production department in the training and assessment of employees;

7. Provide the required technical information to the relevant departments;

8. Responsible for the company's patent declaration, achievement appraisal, publication and other work;

9. The R&D center laboratory is responsible for inspecting the products produced in the workshop and feeding back the inspection results within the specified range;

10. The R&D center laboratory is responsible for the daily maintenance and maintenance of the test equipment;

11. Complete other tasks assigned by the company.

Improve technology, optimize products, and test performance.