How to replace a few pieces of solid wood flooring if it is damaged

1. Remove all items in the room, move furniture, household appliances and sofas to other areas for preservation; And find a crowbar to all the addresses.

2. Check the flatness of the cement mortar surface below the address after warping; The master bricklayer told me that if you find that the bricks are uneven under the original tiles, you have to re-level; Otherwise, after the follow-up floor is laid, there will still be a hollow drum phenomenon, and then the decoration will be very troublesome, please pay attention to friends; Be sure to carry out secondary treatment of the ground under the bricks;

3. Dry to ensure that the ground is dry to prevent the ground from returning to moisture in the future.

4. Clean the ground and sweep the ground clean, including every corner.

5. The ground is covered with a moisture-proof layer of pearl cotton, which can prevent the floor from getting damp in the future. The moisture-proof layer should be paved and the joints should be close together; Perform wood floor installation; The above work is handed over to a professional installation master, and the installation process of wood flooring is relatively simple.

The replacement method for a few damaged pieces of solid wood flooring is: first, remove the broken floor, be careful not to damage the edge of the adjacent floor, then lift the adjacent floors at a certain angle, and finally freeze the floor according to the seam edge bayonet, and flatten the floor.

Flooring is a building material used for the surface layer of the floor or floor of a house, and is made of wood or other materials. Flooring is used as a building material, and building materials can be divided into structural materials, decorative materials, and some special materials. A variety of styles such as Chinese style and European style will be used, and the use is becoming more and more extensive.

Hello, is it man-made or is it inherently bad. If it is man-made, it may not be compensated.

The surrounding floor needs to be raised in many pieces and replaced.

Clean the glue around the floor, the replaced floor is beautiful. Cut the bottom of the heel of the new floor to make room. Gluing should take up a certain amount of space.

Four. Finally, install a new floor in the location to be replaced. Apply glue around the floor.

Remember to install the same length. Paint refinishingPaint refinishing is the most common method of remodeling flooring, mainly for paint peeling off on some interior floors. Generally, paint repairs are carried out by professional structural adjustment instructors.

However, it should be noted that the brand name of the paint repair material must be chosen to ensure the repair effect.

Local defectsFor partially damaged solid wood floors, especially reinforced solid wood floors, if there is local damage, we need to replace partially damaged floors. For the decoration of second-hand houses, flooring is also a relatively old style. The partially replaced slab must be selected according to the old style.

The decoration can also be harmonized with an aesthetic global reorganization, and if the floor is damaged as a whole, it must be completely renovated. Comparatively speaking, it is much more problematic to restructure the floor as a whole. In terms of the volume of construction, this far outweighs the local structural adjustments.

It should be noted that the overall restructuring should choose some brand flooring or floor tiles, and also pay attention to some environmental protection services. The effect is relatively good.

To repair scratches on wooden floors, they must be treated according to the situation. If there are slight scratches, they can be treated directly with polishing wax. After the wooden floor is cleaned, apply a special polishing wax to the wooden floor to repair scratches and improve the flatness of the wooden floor.

If the scratch is severe, it is recommended to polish it locally, and then polish and repair it after filling, the effect is better.

Hardwood floors can be refurbished, sanded and leveled and then painted. Laminate flooring can not be renovated wood flooring renovation construction procedures.

1. Use a large-scale floor renovation machine to polish and remove the paint layer, surface layer, and wood layer for about millimeters, and then carefully sanding to make the floor surface delicate and smooth to reach a new state. The corners of the floor are sanded with a small angle grinder to achieve an overall smooth effect.

2. Remove the original transparent putty on the side seam and reseal the seam.

3. After the primer is dry, brush the topcoat for the first time and let it dry.

4. Carefully grind with water sandpaper, grind the surface layer until it feels slightly rough, remove the crumbs, and brush the second coat.

5. After the last topcoat is dry, apply floor wax. Find a professional installation floorer, they will install, of course, will also dismantle, only part of the blister is not a big problem, of course, to remove more so that some insurance. If you have a solid wood floor, you should be able to reinstall it as soon as its moisture content drops, and of course, you can also apply plain sand to paint a little better.!

If the floor is broken, only replace the floor, or go to the store to buy a piece of flooring, and then call the installer of the store to come to the door to replace the broken floor with the deduction method. Then you need to pay for the working hours you incur.

Summary. 1. If only one piece of the wooden floor is broken, this piece can also be replaced. Identify a gap on one side of the bad floor and use a saw to cut the floor from the surface.

2. The floor that has just been dismantled, the surrounding mortar must be cleaned, and some should be removed if it is coated with tile adhesive. It is also necessary to clean the tenon groove, otherwise the flatness will be affected when laying in the later stage. 3. Choose a piece of wooden floor with the same pattern and the same model, remove the lower part of the notch of the core floor, reserve a part of the space, and then apply tile glue, install it to the position that needs to be replaced, and at the same time, the floor tenon around it needs to be coated with tile glue, and gently beat it with a rubber hammer until it is completely flat.

After that, you can't step on this wooden floor for a day or so, and after a day, you can walk normally.

1. If only one piece of the wooden floor is broken, this piece can also be replaced. Identify a gap on one side of the bad floor and use a saw to cut the floor from the surface. 2. The floor that has just been dismantled, the surrounding mortar must be cleaned, and some should be removed if it is coated with tile adhesive.

It is also necessary to clean the tenon groove, otherwise the later laying of the lifting will affect the flatness. 3. Choose a piece of wooden floor with the same pattern and the same model, remove the lower part of the notch of the core floor, reserve a part of the space, and then apply tile glue, install it to the position that needs to be replaced, and at the same time, the floor tenon around it needs to be coated with tile glue, and gently beat it with a rubber hammer until it is completely flat. For a day or so, you can't step on the wooden floor, and after a day, the bench will be able to walk normally.

It is regrettable to replace a broken piece of the wooden floor, but it is still very difficult to replace, because the wooden branch attack floor is put together piece by piece, and it must be taken down from the wooden floor of the bad brother.

1. Surface phenomenon: small cracks appear on the paint surface of the wood floor, which will cause the paint surface to peel off in serious cases.

2. Cause analysis.

1) When the climate is changing, the moisture content of the wooden floor is too large or too low, and the wooden floor will shrink or swell, causing the paint film to crack.

2) Exposure to the sun or long-term wind blows, resulting in dry shrinkage of wooden floors. to crack.

3) The wooden floor expands by moisture, the moisture content increases, and the phenomenon of wet expansion occurs, resulting in cracking.

3. Precautionary measures.

The adhesion, elasticity and wear resistance of the paint film can be guaranteed for the wood flooring of the first-class manufacturer.

4. Solution: A small amount of paint film cracking, can be repaired with paint. If the cracked area is large, it can be smoothed and repainted. If the paint film crack of a single wooden floor is long, the wooden floor can be replaced with a single piece.

1. In general, there are a few spare pieces at home, just find out and replace them;

2. If there is no spare floor at home, it can only be replaced.

Take the floor to the material city with the floor, and then let the construction master go over to replace the pavement You can let a professional wood floor maintenance company match the floor, but let the owner provide the floor specifications (length, width, thickness) and floor color.

Wood floor burn repair method:

1. If the burn is not very serious, you can replace the burn to an inconspicuous place, such as under the bed or under the cabinet.

2. If it is burned to almost unusable, it can only be replaced with a similar color, but the color will not be 100% similar, the floor will be divided into old and new, and it will become dull after a long time.

If it is a more serious burn, it is the kind that has injured the solid wood layer, no matter what kind of wood floor you are, go directly to the place where you bought the floor and ask the boss if there is a floor of the same style and specification, and then buy it back and replace the broken floor at home.

Generally speaking, different batches of solid wood flooring will have color difference, directly with the new floor and the original floor to replace it is easy to see the poor with the naked eye, for students with heavy color requirements, you can find some corners of the intact floor, such as under the bed, with the floor under the bed to replace the burned floor, and then buy the new floor under the bed. This not only repairs the burned area, but also does not look abrupt in color.

On the other hand, the surface paint is burned, and the solid wood layer is only stained by the burnt paint. In this case, just clean the floor and reapply the paint and wax.

If your wood burns out a little and you are reluctant to buy a new wooden floor to replace it, there is actually a way, but this is just my personal idea and I have not practiced it. That is, you can go to the same wood, grind it into powder, as for what to grind, then use your imagination, mix the wood powder with varnish, apply it to the floor, fill in the damaged area, and wait for the fixed word, and then polish it a little until the floor is completely flat.

OK.

1. If the solid wood floor is not removed, the floor should be cut out with a cutting machine, and then a new piece should be put down, but the effect is not as good as the original one, and the seam will be larger.

2. Laminate flooring can also be replaced, to be removed from the corner of the wall or the position of the door, until the damaged position, replaced with a new one, and then installed one by one, but there will be some damage in the process of demolition, and a few more good floors can be prepared.

Yes, if it is a solid wood floor, use a cutting machine to cut out the floor, and it cannot be dismantled, and then put a new piece down, but the effect is not as good as the original one, and the seam will be relatively large.

If it is laminate flooring, it can also be replaced, to remove it from the corner of the wall or the position of the door, until the damaged position, replace it with a new one, and then install it piece by piece, but there will be some damage in the process of demolition, you can prepare a few more good floors.

How to replace the floor:

1. Use a tool to chisel a gap on the short side of the floor to be replaced, and then use a saw to cut the surface of the floor to be replaced.

2. Then take out the floor that is divided into small pieces, but be sure not to damage the surrounding floor.

3. Then clean up the glue around the removed floor, and ensure that the cleaned tenon groove is easy to install, if the cleaning is not thorough, the joints will be uneven or not strict.

4. You can use a small piece of floor with a new tenon to slide back and forth on the interface to find out the residual glue and remove it to ensure the beauty of the repaired floor, and it is also necessary to pay attention not to damage the surrounding tenon and groove.

5. Next, deal with the new floor, saw off the lower part of the new floor notch and clean the entire tenon and groove, pay attention to reserve some space, because it will occupy a certain space after applying glue outside.

6. Finally, install the new floor to the position that needs to be replaced, coat the original floor tenon with glue, and apply glue at the tenon and groove of the new floor, and then put it in the gap of the waste plate. Pay attention to whether the length is consistent before installation, if the new date board is long, you can repair it a little shorter, and if it is short, you can only disassemble and assemble the entire floor.

Preparation tools: solid wood flooring, wood files, sanders, wood nails, wood glue, parquet strips, files, wood product pressing plates, wood chip rags, hammers, tape, etc. 2.

Preparation materials: new wood flooring, parquet strips, wooden nails, wood product glue, etc. 3.

Demolition of the old floor: first cut out the parquet strips and wooden nails on the old floor with a wooden file, then use a sander to smooth it, remove the glue of the wood products remaining on the floor, and finally pry the whole floor open with a hammer. 4.

Install the new floor: first put the new floor on the ground, file the parquet strips with a file, then splice the new floor and the old floor, fix the parquet strips with wooden nails, then compact the splicing with a wood product pressing plate, and finally smooth the adhesive on the whole floor with a sawdust rag, and finally fix the ground and floor with tape.

Solid wood flooring, wood files, sanders, wood nails, wood glue, parquet strips, files, wood product pressing plates, sawdust rags, hammers, tapes, etc. 2.Prepare the materials:

New wood flooring, parquet strips, wooden nails, glue for wood products, etc. 3.Demolition of the old floor:

First, the pre-fight strips and wooden nails on the old floor are cut out with a wooden file, and then smoothed with a sanding machine, the glue of the wood products remaining on the floor is removed, and finally the whole floor is pried open with a hammer. 4.Installation of new flooring:

First, put the new floor on the ground, file the parquet strips with a file, then splice the new floor and the old floor, fix the parquet strips with wooden nails, then compact the splicing with a wood product pressing plate, and finally use a sawdust smart touch rag to smooth the adhesive on the whole floor, and finally fix the ground and row of large floors with tape.

I have heating pipes in my house that need to be replaced, but I want to protect the hardwood floor, so I will install the floor after the pipes are replaced.

Dear, replacing the heating ducts requires removing the floor.

The floor is made of wooden keel, can it be removed and reused?

If the floor is said to be intact when removed, it is basically fine.

However, in demolition, there is no guarantee that every piece of floor will be intact.

The pipes are laid out along the root of the wall, is it okay to remove them partially?

In general, when replacing the heating pipes, the wooden flooring does not need to be completely removed, but it needs to be determined on a case-by-case basis. If you think that the heating pipe needs to go through the wooden floor, then the wooden floor needs to be partially removed, and then the pipe should be passed through, and then the wooden floor should be reinstalled. If the heating duct does not need to pass through the wooden floor, it is not necessary to remove the wooden floor, but it needs to be constructed next to the wooden floor.

Do you understand that?

Locally, it needs to be crossed, for fear of damaging the floor.

That can't be helped, that's what you need to do to replace the heating pipes.

Is it not possible to clean the heating pipes directly?

It turned out to be a copper pipe, but it was accidentally broken when digging the potential, and it was difficult to repair, so I wanted to replace it completely.

Smashing the wall broke.

So that's what you just said, partial replacement.

Partial replacement of flooring.

This is also more cost-effective, time-saving and labor-saving.