How to install solid wood floor strips? What to glue with the strip of wood flooring

Flooring is the most commonly used decoration material in our home decoration, and it is often used as the floor decoration of our private space. In the process of laying the floor, it is necessary to use the strip to fix or divide the area. We don't know much about decoration, so today we will introduce the relevant content of the floor strip below, let's take a look!

What is floor stripping.

Floor strip is also called floor buckle, in the process of laying the floor, a piece of the floor spliced together, or different indoor spaces to pave tiles and floors need to divide the area, such as bedrooms and corridor space, etc., need to reserve a certain gap, for the overall appearance, cover the gap, floor and tile splicing of the closure.

Types of floor strips.

Flattened strips. Flat strips are used to cover the same height of the ground in different spaces, to decorate the gaps caused by laying floors, and can also be used to lay the joint joints between floor tiles and floors, using the most common type of stripping.

7 notes. 7 slips are generally used when the indoor floor is laid to the end, the floor gap and the production of the closure. It can be used on floors, steps, and areas where baseboards are not laid.

High deduction flat strip.

If there is a difference between the tiled area and the floor laying height, the opening is remedied by using the high and low buckles.

Stair buckle. Staircase buckle is less used in home space, generally suitable for villas or duplex buildings, when the floor is laid to the staircase area, it is necessary to use the staircase buckle to connect, the staircase buckle has metal and solid wood materials, which can be selected according to the overall decoration style.

Footboards. Footboards are generally used in interior rooms, where the gap between the floor and the wall is remedied and the wall is protected from damage.

Solid wood floor strip installation.

Step 1: Before installation, you need to check the water circuit wiring in the installation area to prevent mistakes. Check that there is no error, start drilling, and keep an appropriate distance between the orifices so that the bead does not press down on the wall. Holes need to be punched with special utensils.

The general length of the strip is two meters, so that the strip is closer and stable and firm, the hole spacing should be roughly kept at 40 cm, the spacing of the bead interface should be set smaller, and then the wooden strip is nailed into the hole in turn.

Step 2: Nail the nail that needs to be fixed into the previous eyelet wood strip and drive it into the wall to prevent the strip from being too loose.

Step 3, because some household water circuit pipes go to the wall, the general socket area below the laying of water circuit pipelines, we need to calculate the spacing when punching, so as not to damage the water and electricity layout.

As for the floor strip, I will introduce it here, I hope it will be helpful to you. If you need to know more about the decoration information of the floor, or need to know other decoration knowledge, you can **** Qijia.com, more exciting content, waiting for you.

Baseboards: Many PVC ones, as well as the so-called "wood plastic" ones, are similar. If there is a PVC or WPC base, then buckle the baseboard.

The floor needs to be pressed on all four sides, so this kind of baseboard is not advisable. This is also the reason why it seems to be advanced and scientific, but it cannot be popularized together.

Door strip and 7-figure buckle:

The door strip is metallic, not PVC. There is usually an inverted triangle card slot underneath to snap the nail cap. The nail is also first made on the ground, the nail cap can be adjusted position, and then aligned with the light knock over the door surface, knock on the installation.

The strips of the wooden floor are bonded with glass glue, which can be bought in the building materials market, because it is very inconvenient to buy an extrusion gun, which saves time and effort, and the amount of glue is not large.

Advantages of wood flooring: Wood usually floats on the water, with a few exceptions. In this way, the use of wood as a building material is easier to transport and lay than metal building materials and stones, according to the experimental results, the tensile strength of pine is 3 times that of steel, 25 times that of concrete, 50 times that of Dali, and the pressure resistance is 4 times that of marble.

Wood can be sawed, planed, shaved, cut and even nailed at will, so it can be used more flexibly in building materials to play its potential role, while metal concrete, stone, etc., due to hardness, do not have this function.

In fact, whether it is a PVC strip, a metal strip or a wooden strip, it can't be glued with woodworking glue, so it is recommended that you use a little glass glue to glue, which can be glued for a long time.

Floor strips, also known as buckles, are generally used for the gaps between floors or doors, because wooden floors are composed of blocks and blocks, in some cases there must be a large gap is, for the sake of aesthetics, so a wooden strip is laid on it.

Installing timber floor edging is an important step in the laying of floors, which ensures the beauty and stability of the floor. Here's a more general installation method:

1.Preparation.

Buy wood floor trim strips to make sure the length and width match the size of the room and the thickness of the floor. It is also necessary to purchase suitable steel nails, wax paper and joinery glue.

2.Installation location.

After the floor is fixed, place the wooden floor with a neutralized edge strip, usually placed in the gap between the wall and the floor, which should be slightly wider than the thickness of the floor and the same height as the floor.

3.Fixed edge strips.

Place the edge strip in the gap between the floor, make sure it is flush with the floor, and secure it to the floor with wooden and steel nails. Every 10-12 inches is secured with a nail, and the edge strip must be pressed against the nail.

4.Caulking. After the edge strip is installed, caulk with wax paper or a wax block similar to the color of the floor. Wipe clean immediately after filling to avoid wax stains damaging the edging strip.

5.Gluing. Use joinery glue to carefully glue the head and edge strips to the floor. Before applying the glue to the presser edge with a brush, make sure that its surface is clean. If there are irregularities when gluing the floor, you can fix it with clips for a while.

In conclusion, it is important to read the installation instructions carefully and ensure the quality of the individual tools and equipment before installing the timber floor edging. Through careful preparation and meticulous operation, the beauty and stability of the floor laying can be ensured.

Wood flooring is a very popular flooring material that can bring warmth and coziness to a room. However, if it is not installed properly, it can affect its aesthetics and longevity. Among them, the installation of edge strips is an important step that can increase the stability and durability of the floor.

The following is how to install the non-pressed edge strip of the wood floor::

1.Prepare tools and materials: Installing edge strips requires different tools and materials, including drills, screws, gap fillers, nail plates, and edge strips. Make sure all tools and materials are of high quality to ensure a smooth installation process.

2.Check the floor: Before installing the edge strip, it is necessary to check that the floor is flat, dry and clean.

If the ground is uneven, it needs to be leveled first; If the ground is not dry, you need to wait for the surface of the ground to dry before installation; If the floor is not cleaned, it needs to be cleaned before installation.

3.Determine the location of the edge strip: Before you install the edge strip, you need to decide the position of the edge strip. Typically, the edge strip should be mounted on the edge of a plank perpendicular to the ground to create a neat-looking edge.

4.Installing the Nail Board: Since the edge strip is installed directly on the edge of the board on the ground, a nail board needs to be installed first to ensure that the edge is flat and stable. The nail board should be arranged along the entire wall or edge.

5.Installing the edge strips: Once the nail plate is installed, you can start installing the edge strips. Mounting the edge strip requires the use of screws to fix it to the board. The length of the edge strip should be cut according to the length of the border to ensure a neat appearance.

6.Fill the gaps: Once the edge strips are installed, the gap between the edges and the floor needs to be filled with a gap filler. This will ensure that the gap between the edge and the floor is flawless and will increase the stability and durability of the floor.

In short, the installation of non-pressed edge strips for wood flooring requires careful planning and patient implementation. If you follow the steps above, you can ensure the quality and aesthetics of your flooring installation, while the noise increases the stability and durability of your flooring.

The floor pressing line is used to decorate the junction of the floor and the wall, which can not only beautify the environment of the room, but also effectively solve the gap between the floor and the wall. Let's introduce the installation method of the floor pressing line:

1.Clean walls and floors.

Before installing the floor line, the walls and floors need to be cleaned to remove dust and other debris.

2.Measure the installation position.

First determine the installation position of the floor line, you can use the corner of the wall or a ruler to measure the distance from the corner of the wall to the floor, and purchase the appropriate size of the floor line according to the measurement results.

3.Cutting and pressing lines.

Depending on the measurement results and the size of the floor line purchased, the floor line is cut using a sawtooth saw or hand saw. After cutting the floor line, use a steel ruler to polish along both sides of the line to ensure that the surface of the line is flat.

4.Install floor lines.

First of all, apply the glue to the inside of the floor line, and align the floor line with the installation position and press it to fix. Note that for floor lines mounted on curved wall edges, you need to mark the area to be cut with a line pen.

Finally, connect the pressure lines at the corners of the wall and fix them with wooden nails or nail guns. During the installation of floor lines, special attention needs to be paid to measurement and alignment to ensure that the installation position is accurate.

Now in home decoration, most people like to install the strip, it is not only decorative, but also can play a stabilizing role in the installation of the floor, strengthen its firmness, thenWooden floor door stripHow? Is it necessary to install beads? Let's take a look.

1.How to make a strip at the door of the wooden floor.

Wooden floor door stripHow? The decoration process of the strip is mainly used between the floor and the floor or between the floor and the tile, or it is the gap filling material between the bottom plate and the door, which can enhance the aesthetics while covering the gap, and the strip of the wooden floor door is divided into two situations: between the floor and the floor and between the floor and the tile.

Wooden floor door stripThat is, we often say flat pressure strip, it is mainly to cover the room and the outside of the room two at the same level of the ground connection defects, can also be 7 notes, it can be a good deal with the gap and the closure of the unsightly problem, if the connection between the wooden floor and the floor tile has a high and low error, then it is necessary to choose the high and low buckle strip installation method.

That's specificWooden floor door stripHow? Before that, it is necessary to know the direction of the hydropower wiring to avoid being damaged, and then the spacing of the drilling holes should not be too large, so as to avoid the unevenness of the strip, and then nail the small wooden strip into the drilled hole, and nail the nail of the strip to the wooden strip.

2.Is it necessary to install beads?

a. If it is between the same floor, it is not necessary.

If the wooden floor in the room and living room are the same style, thenWooden floor door stripThere is no need to do it, but it is necessary to pay attention to the order of laying the wooden floor, not because you want to save the board to choose an area for the laying of an area, to lay the same floor as a whole area, so as to avoid the gap between the door and the floor.

If you don't want to install the strip, it is best to radiate outward from the position of the door frame to both sides, so as to ensure the integrity of the wooden floor doorway area.

b. If it is between the floor and the tile, it is recommended to install it.

Even if the height between the floor and the floor tile is at the same level, there will definitely be gaps in the connection between them, and it is still necessary to install a strip, especially for the kitchen and bathroom space, which is an area with more water, which can effectively prevent the floor from swelling and shrinking.

c. If it is between the floor and the wall, it is necessary to install the trouble.

The strip installation in this area is actually the baseboard, which is very necessary for this construction to protect the cleanliness of the wall and excellent decoration.

How to do and is it necessary to install the strip introduction, whether it is necessary for the installation of the strip, it mainly depends on the specific area and what material to choose to install the situation to decide, I hope my sharing will be helpful to everyone.

Summary. It is good to have a strip on the wooden floor, and the solid wood floor does not have to use a strip, and it is okay not to use it, but it is more troublesome to build a solid wood floor without a strip, and more boards are also needed, and the floor may be deformed, so it is mostly recommended to use a strip; Between the floor and the wall, the edge strip is needed, and the edge strip here is the skirting board that we can often see, which can better connect the wall and protect the wall from being dirty.

Before paving, the Youfeng wood floor is good for pressure Hui Zhi, the solid wood floor does not have to use the pressure strip, it is also possible not to use it, but the solid wood floor is not equipped with pressure strip construction is more troublesome, and more boards are also needed, and the floor may also be deformed, so most of them are still recommended to use the pressure strip; Between the floor and the wall, the edge strip is needed, and the edge strip here is the skirting board that we can often see after grinding, which can better connect the wall and protect the wall from being dirty.

Good. The main use of the strip is to cover the ugliness, and most of the plates are not neatly cut between the plates; The non-pressing strip and baseboard are very unsightly; And it is very difficult to ask the master Qinglao to cut the incision into a straight line of excavation; Joints, the wooden floor must be left with seams to cope with the deformation of heat expansion and cold contraction; If you don't leave a seam on the floor, you will arch your back; It is easy to sound when stepped on, and it cannot guarantee the service life; And the seam is relatively large, which is not beautiful. 3. The paint surface and the incision of the wooden floor are easy to grind.