How to disassemble the inner barrel of Hitachi automatic washing machine?

After the washing machine at home has been used for a long time, a certain amount of dust often accumulates in the inner barrel, but cleaning it needs to be completed by removing the inner barrel. But there are still a lot of users who don't know much about its removal method, now let me give you a detailed introduction to the removal method of the barrel in the washing machine!

How to disassemble the barrel in the washing machine.

1. Take down the drain pipe of the washing machine and put it on an empty bucket (to a certain height), close the water inlet valve and the front door;

2. Pour the amount of water used in the three-kettle into an empty container with descaler, prepare and stir evenly according to the ratio of descaler: water = 1:2;

3. Open the detergent addition box, pour the mixed descaler solution from the detergent addition box, and be careful not to splash on the detergent addition box;

4. Press the power switch of the washing machine, set the program to [Washing Program], and select the longest time to rotate the washing drum; After the descaling solution is discharged from the drain pipe into the barrel, the discharged descaling liquid is added from the detergent addition box, and so on many times until the program is finished, and the filter is opened to clean the filter.

Well, about the disassembly method of the inner drum of this Hitachi automatic washing machine, the screw with the screw on it can be removed.

The washing machine you are talking about, its inner cylinder system, needs to use reasonable tools to remove its buckles.

The inner drum of the automatic washing machine can be disassembled, and the screws inside can be removed by untying the screws with tools.

You can check the equipment manual, which has the installation and disassembly steps.

Fully automatic washing machine inner barrel disassembly tutorial.

1. If you want to disassemble and wash the inner cylinder of the washing machine, you must first cut off the power supply. 2. Then use a screwdriver.

Unscrew the set screws on the bottom of the inner barrel of the washing machine. 3. Grab the raised blade with both hands and lift the blade to remove the blade. 4. After removing the blade, clean the blade with detergent, then brush and dry.

5. Then use a tool to remove the inner barrel and clean the inner barrel with a brush. 6. After cleaning, put it back in its original position. Precautions for use:

1. If the dehydration is unbalanced, then it is a fully automatic washing machine, which can correct the dehydration imbalance, but if the problem of imbalance has not been solved after two corrections, then the washing machine will stop and alarm, and it needs to be adjusted manually. 2. If you wash with hot water, you need to pay attention not to use water above 50 degrees, and pay attention not to splash the water on the control board, so as to avoid the internal electrical parts.

Burn due to water contamination. 3. Before washing clothes, you should check whether there are matchsticks, hairpins or coins and other sundries in the washed clothes, and if so, you should take them out. 4. When the temperature is very low, the washing machine is prone to freezing, at this time, you can use warm water below 50 to soak for a period of time, wait for thawing before use.

1. Before disassembling the inner cylinder of the washing machine, be sure to unplug the power plug to prevent electric shock. Then open the lid of the washing machine, unscrew the screws on the bottom surface of the inner cylinder, and after unscrewing, pick up the raised blades with both hands and lift them up to remove them.

2. After taking out the blades, you can see that there are 4 screws at the bottom of the washing machine, unscrew them with a screwdriver, and place the screws in a designated position.

3. Then start to remove the cover, there are 1 screw on the left and right sides of the outside of the washing machine, open the shell, and unscrew the screws. There are also 2 screws in the back, which are also unscrewed together.

After unscrewing the 4 screws on the outside of the upper cover, you can lift the upper cover. Because the lid can't be completely removed, it's still connected to the wires, so be very careful, we have to turn it back and find a support for it.

4. At this time, you will find that there is a lid on the barrel, unscrew these 4 screws, and gently lift it upwards to remove it.

5. As long as you shake the inner bucket, you can take out the inner bucket of the washing machine.

The steps to remove the barrel in the washing machine are as follows:

1.First, disconnect the power to the washing machine and turn off the faucet to prevent accidents.

2.Open the door of the washing machine, remove all the laundry, and close the door.

3.Remove the top panel of the washing machine. This may require the use of a screwdriver or other tools, depending on the model and manufacturer of the washing machine.

4.Below the top panel of the washing machine, you will see the connection points between the inner and outer drums. Use a wrench or pliers to remove the attachment points.

5.Once the attachment points have been removed, you can remove the inner bucket from the washing machine. Please note that the inner bucket can be very heavy, so you may need to seek help.

6.If needed, you can further disassemble the inner drum for cleaning or repair. The exact steps may vary depending on the manufacturer, so check your washing machine's user manual for more information.

Remember to always disconnect the power from the washing machine and turn off the faucet before making any repairs or disassembling to ensure your safety. If you're not sure how to remove or repair the inner barrel of your washing machine, seek professional help.

1. Cut off the power supply and wipe off the water stains on the inner wall;

2. Use a screwdriver to loosen the screw in the center of the inner barrel counterclockwise;

3. Extract the raised blade upwards with both hands;

4. Use a screwdriver to unscrew the 4 screws under the blade;

5. Use a screwdriver to unscrew 1 screw on the left and right sides of the washing machine shell;

6. Unscrew the 2 screws inside in the same way;

7. Open the upper cover of the washing machine (it cannot be completely opened, there are water pipes and wires inside);

8. Unscrew the 4 screws on the cylinder with a screwdriver;

9. Remove the inner barrel of the automatic washing machine.

1.Unplug the power of the washing machine to ensure safety.

2.Open the door of the washing machine and remove the laundry from the inner bucket.

3.To remove the top cover of the washing machine, you usually need to use a screwdriver or wrench to remove the screws from the top cover.

4.To remove the control panel of a Privy washing machine, it is usually necessary to remove the screws from the panel and then remove the panel from the washing machine.

5.To remove the front panel of a washing machine, it is usually necessary to remove the screws on the front panel and then remove the front panel from the washing machine.

6.To remove the inner bucket of a washing machine, it is usually necessary to remove the screws on the inner bucket and then remove the inner bucket from the washing machine.

7.Install the new inner drum and assemble it according to the reverse steps.

Notes:1During the process of disassembling the washing machine, it is important to take care to avoid damaging other parts of the washing machine.

2.In the process of disassembling the washing machine, it is important to pay attention to safety to avoid electric shock or other accidents.

3.If you are not sure about your operating ability, it is recommended to find a professional maintenance personnel for repair.

1. Before disassembling the inner drum of the washing machine, be sure to unplug the power plug to prevent electric shock, then open the lid of the washing machine, unscrew the screws at the bottom of the inner cylinder, and after unscrewing the screws, pick up the raised blade with both hands and lift it up to remove it.

2. After taking out the blade, you can see that there are four screws at the bottom of the washing machine, unscrew them with a screw transport wire knife, and put the screws in the designated position, which is easy to find during installation.

3. Then start to remove the cover, there is one screw on the left and right sides of the outside of the washing machine, open the shell and tighten the screws, there are two screws in the back, which are also unscrewed.

After unscrewing the 4 screws on the outside of the upper cover, the upper cover can be lifted, because the top cover cannot be completely removed, it is still connected to the wire, so you must be very careful, you must turn it back and find someone who supports it.

4. At this time, you will find a lid on the barrel, unscrew these four screws and lift them slightly upwards to remove it.

5. Finally, as long as you shake the inner cylinder, you can take out the inner cylinder of the washing machine.