Jade carving theme design! Describe the process steps of making jade carvings

The first step is to phase the material. phase, that is, look. The so-called phase material is to carefully observe on a piece of rough stone of river mill jade, which is the jargon of designing and making river mill jade.

First, a piece of river grinding jade rough stone is rinsed with clean water, and during the rinsing process, it is repeatedly observed. One is to look at the color and thickness of its skin. The second is to see if there is a "flesh-exposed" part, that is, to look for jade that can expose the stone skin on the raw materials, so as to judge the color of the jade inside.

The third is to look at the shape of the original stone of the river mill jade, which is suitable for standing design and production or horizontal design and production.

The second step is to ask for information. Commonly known as "fenestration". That is, after the material is finished, a suitable part is selected on the original jade of the river mill, and a piece of stone skin is cut down here with a diamond circular saw blade to expose the jade inside.

The size of the area when cutting is determined by the thickness of the stone skin, and the principle of seeing the quality of jade. The color and texture of the jade are observed, so that they can be used as a topic for jade carving works.

The third step is to choose a topic. That is, to determine the theme of the work. Through the observation of the "windowing" of the rough stone of river mill jade, we basically grasped the jade color and texture form of river mill jade, and then selected jade carving works that express the theme according to the shape and color of this river mill jade.

If there is a piece of beautiful shape, excellent texture, pure color of the river jade, coupled with reasonable design, ingenious theme and exquisite carving technology, the value of this river jade will exceed its own value dozens of times, all said that the topic is very important, is a very critical step.

The fourth step is design. The design of the river mill jade must be taken into account both inside and outside, and complement each other. No matter what kind of subject matter, first consider how the colorful outer stone skin of Haohe Moyu is used in jade carving works.

Secondly, it is necessary to correct the proportional relationship between the main body and the stone skin foil in the design. If a river mill jade handicraft is completely stripped of its unique stone skin, it can only be regarded as an ordinary jade. The value of the river mill jade will be greatly reduced.

The fifth step is to draw and make. After determining the theme of jade carving on the original jade stone, he began to paint, that is, to draw the initial figure of the jade designed and made, and the carver carved the prototype of the work with a grinding tool according to the graphic lines. Then paint and re-carve.

In this way, several times, from the surface to the inside, the carving skills are displayed until they survive, that is, the successful carving of the Hemo jade works. However, this cannot be said to be completely completed, and there is still a jade glazing process at the end.

Upstairs: Are you being too irresponsible? How to carve the seal directly in the search, and then copy and paste?

Please, your netizen's question, be kind, responsible, and serious, okay? It's not that the netizen who asked the question doesn't know how to gram, but is just looking for a suitable subject!! Eliminate irresponsible !!

Hello, according to your chapter Pi, it is not good to judge the size of your chapter Pi.

There are a total of 20 words in Tianxingjian's self-improvement and terrain Kun gentleman with virtue, and these 20 words can be on 2 idle chapters, and the number of words is already too much! Under normal circumstances, the idle chapter will not exceed 8 words per piece.

Of course, not absolutely, if your chapter is large enough, if you want to play with some new tricks, art encourages innovation!

There are more than 4 characters in the idle chapter, and there are many 6 words, and the 8 characters are generally basically capped!

Suggestion: self-improvement, virtue and virtue 8 characters idle chapter, 2 pieces, a 4 words each, suitable.

I support a serious question and beg for it!

Describe the process steps of making jade carvings

Hello, the steps of the jade carving production process are as follows: 1. The first thing to choose is to select the round jade material that is resistant to digging up, and first cut the large block according to the texture and cut it to the point like Figure 1. 2. The second step of design is to design the composition according to the texture of the jade like Tusanzhou II, that is, to apply art according to the aptitude, which requires the carver's painting technology, imagination and design ability.

The design of jade is very crucial, the designer designs according to the color, texture and shape of the jade, can not waste the jade, and make good use of the color to achieve the best effect. 3. Rough carving will start carving next, and the basic shape of the design will be made first. Rough carving is very important, this process is the basis for the success of the whole jade carving, because the reduced part cannot be added.

4. After the overall wheel is carved out of the outline, the fine carving steps are carried out, and the jade carving shape is further finely processed to make the carved pattern clearer and clearer, and to achieve the carving effect required by each part. 5. Grinding and polishing No matter how carefully you carve it, the surface of jade is always rough, and only after polishing and polishing can it show the crystal clear, warm and smooth of jade, so as to make jade more noble. Grinding and polishing is also a very cumbersome step, from coarse sand to fine sand, after many times of careful polishing to present a treasure of jade.

6. Fine-tuning and trimmingAfter these steps, a beautiful and delicate jade handicraft will come out.

The success of the creation of an excellent jade carving work is by no means achieved overnight. Not only must you have superb technical skills, but also have a pair of eyes that are different from ordinary people and are good at discovering beauty. A good jade carving work, without clever design and conception, everything is in vain.

A piece of jade, like a stubborn stone, through the jade carver's careful carving, to create a work with vitality, so as to attract people's infinite reverie, give people a feeling of beauty, this is the charm of jade carving art.

The following piece of jade jade material itself has a piece of black, but after the ingenious conception of the jade carver, it is designed to be the body of an old man, and the whole picture has no sense of disobedience!

The rising sun is painted in the upper left corner, and the whole character and picture are repositioned, and the entire outline is roughly outlined, which is much more vivid!

Then there's the carving, and the focus is on the details to make it look more lifelike! In the end, the finished product came out, do you think it is high-end and atmospheric, and the Chinese model is full?

There is such a kind of exquisite jade Zen series of inlay works that once received the warm attention of Cui friends. We have seen a lot of these jade carvings, but we don't know that their founder is him.

Mr. Wang Kun is a representative of young independent designers in China, focusing on the creation of cultural jewelry, and has been greatly recognized by the domestic design industry. Let's take a look at some of the jade Zen works created by him and the jade carvers!

Mr. Wang Kun and jade carving master Wang Junyi collaborated on the work: "A Leaf Rulai".

Mr. Wang Kun and jade carving master Li Renping collaborated on the work: "Morning Dawn".

A Zen jadeite jointly produced by a jadeite brand and Mr. Wang Kun.

And this series of his jade Zen works is also a combination of the most oriental Buddha and the metallic beauty of the West to create a unique beauty!