What should I do if I get too much corn mequatin?

Spray brassin, gibberellin with some trace element foliar fertilizer, humic acid fertilizer, etc., to alleviate the inhibition of corn growth.

Spraying too much corn mequat will cause it to not grow normally, and in severe cases, it will stop growing, resulting in stalk breakage, which will seriously affect the yield of corn. The height of the stalks will be suppressed after spraying mequaticin, and if it is excessive, it is necessary to take timely treatment measures. It is advisable to spray plant regulators as well as foliar fertilizers to promote its rapid recovery.

Specifically, it is sprayed with brassinolide and zinc sulfate solution, and it is recommended to spray once a week, two or three times in a row.

The first time I heard that there was still chlorquatin, the chemical industry was really omnipotent, and the farmers did everything.

Immediately foliar spray some brassin, and then with amino acid foliar fertilizer spray again, mequat such a vigorous control agent, unless the corn is too crazy to use, in general, on the foliar spray of some powder potassium dihydrogen phosphate can achieve the effect of controlling the prosperity, but also for corn yield.

After the "big flare" of corn appears, the female spikelets and florets of corn begin to differentiate, and the timely re-application of bud fertilizer can promote the normal development of the ear and increase the grain, and the bud fertilizer is generally applied in a timely manner 14 days before heading. If the base fertilizer is insufficient and the growth of corn is weak, it is necessary to increase the amount of fertilizer, and the rotting farmhouse fertilizer and Yanwo microbial agent can be applied per mu, and at the same time, according to the soil moisture, appropriate watering to replenish the water.

Proper fertilization at the flowering stage can prolong the grain filling period of corn, promote grain filling, improve seed setting rate, and increase yield. If in the early management, the fertilization is insufficient and the soil nutrients are insufficient, it is best to apply an appropriate amount of tapping fertilizer. It can be used per mu with water-soluble fertilizer and high phosphorus fertilizer, mixed with an appropriate amount of fine soil, and applied near the roots of the plant, but do not directly contact with the root system.

If the soil moisture is insufficient, it can be used to irrigate the roots of the plants with fertilizer and water.

Yes, mequat is mainly to improve the lodging resistance of corn, as long as you use it correctly and the concentration is good, you can spray it twice. From the tasseling stage to the flowering stage, the plants basically stop growing, and the consumption of nitrogen accounts for about one-fifth of the whole growth period, phosphorus accounts for about one-fifth, and potassium accounts for about one-third. Once the filling begins, the amount of fertilizer required for the corn increases rapidly, forming proteins, starches, and fats in the grain until the grain is ripe.

It should be noted that in order to prevent the seedlings from burning during fertilization, holes or strips should be made at a depth of 6-8 cm from the plant at a depth of 7-10 cm. Most of the areas with general fertilizer retention can be divided into two and three applications. In principle, phosphorus and potassium fertilizers are fully applied, and nitrogen fertilizers are generally not higher than 20% and 30% of the total nitrogen rate.

40 kg of fertilizer per mu, applied in ditches or holes, with an application depth of 5-7 cm. Conditionally, organic fertilizer can be added, organic fertilizer is about 10 cm deep, corn plants can be removed 15-20 cm in the ditch, apply organic fertilizer, chemical fertilizer, etc. once, conditional can be combined with "Yanwo microbial agent" 2 billion live bacteria, containing Trichoderma harzianum, so that crops can better absorb nutrients and improve the effect of fertilizer.

The purpose of corn is to control the internode length of corn jointing, make the corn plant height shorter and stronger, enhance the resistance of corn to wind, lodging and other stresses, and at the same time, it can also promote the growth of corn ears and increase yield.

The principle of action of mequat is to achieve the purpose of plant dwarfing by inhibiting the rate of gibberellin synthesis in corn plants. Chlorquat is a plant growth inhibitor, and it is not beneficial to use this type of product throughout the growth period of the plant. When the amount of nitrogen fertilizer is too large, the plant grows and can be used in small amounts.

However, after use, it also has a detrimental effect on the growth of the later stage. It can be said that there are pros and cons. Crop growth is itself a pathology, and this sickness is caused by a problem in the management of the growth process.

Waiting until the problem arises, and then artificially forcing it to suppress it is a double harm.

The correct approach is to manage scientifically according to the growth characteristics of crops, rather than taking the way of treating headaches and feet.

In corn fields, it is recommended to use our photoattractant or other similar products to increase the ability of photosynthesis by activating the plant's own vitality, so that the plant can return to normal growth. Then the excessive use of dwarf will inhibit the plant height of corn, the ears are small, the grain is less, and the yield will be affected, so the principle of using mequat is that the corn is vigorous and fertile fields, it is recommended to use, and vice versa.

Use of overdose mitigations:

1.Chlormequat uses excessive foliar sprays of gibberellin on corn to counteract homogeneous properties. (Because it is antagonistic to the external gibberellin, it can cancel each other). The specific dosage is based on your reference for the dosage of chlorquatin.

2.The subject means that chlorquat is used in excess, I don't know how much you use? What manufacturers of products?

Have you seen any precautions? Generally, the manufacturer's products will have these, and if there is a problem, contact the manufacturer and the seller in time, and under normal circumstances, they will provide you with an antidote (you can contact the manufacturer).

Corn beating too much mequat will affect the yield, the growth is slow, and it is difficult to grow taller, so you can't beat too much, and you can do it in moderation.

Beating too much will lead to stones on the corn body, and it will also lead to soil damage, which will lead to a decrease in the yield of corn. Generally, after this hormone is injected, corn basically does not grow tall.

There may be a situation of being relatively short, and the yield will be seriously affected, and the specific length and height should be determined according to the amount used.

Corn mequat is used to control the growth of corn, long and long, after beating, corn growth will not only grow branches, branches, will be headed, you have played too much in this situation, you can use plant growth regulators and nutrient amino acid foliar fertilizer to remedy.

In order to prevent the seedlings from burning when fertilizing corn, holes or strips should be made at a depth of 7-10 cm at a depth of 6-8 cm from the plant. Most of the areas with general fertilizer retention can be divided into two and three applications. In principle, phosphorus and potassium fertilizers are fully applied, and nitrogen fertilizers are generally not higher than 20% and 30% of the total nitrogen rate.

In the application according to the soil fertility situation, generally apply about 2 tons of organic fertilizer per mu, and with 10 kg of ammonium fertilizer, 20 kg of phosphate fertilizer, and 6 kg of potassium fertilizer. If the plot is insufficient in zinc fertilizer, it should also be appropriately increased by about 2 kg of zinc fertilizer. The basal fertilizer is generally applied in combination with the ground before sowing, which can be applied in holes or strips, and after application, the fertilizer is covered with about 4 cm thick fine soil to avoid direct contact between the seeds and the fertilizer to burn.

Corn jointing stage, that is, 8-10 leaves The use of mequat in the early stage of corn jointing is effective in preventing lodging, and when the corn height is 1 meter, it has exceeded the initial stage of jointing, and the prevention effect is poor at this time.

In order to prevent the corn plant height is too high, resulting in lodging, inconvenient harvesting and other problems, most farmers take the method of spraying chlormequatin, but due to the incorrect spraying method or time, the effect is not obvious

Chlorquat is a synthetic growth inhibitor that can inhibit the elongation and growth of crop cells, making crop internodes shorter, thicker, and dark green leaves. The application of appropriate concentrations of mequat preparations to maize production can improve the population structure, reduce plant height and increase maize yield. Usually in the jointing period according to the growth of corn in the field to decide whether to spray, do not spray on those plants that are already weak, low plants, yellow leaves, so as not to affect the normal growth of corn.

Wangchang field can generally be mixed with 20 ml of water per mu for 30-40 kg to make an aqueous solution of corn mequat with a concentration of 600-800ppm, and spray the top leaves of corn plants. In addition, at the 11-14 leaf stage of corn, the upper leaves of corn are evenly sprayed with 40 ml of corn mequat or 50 ml of ethephon per mu, which can control plant height, promote ear differentiation, and improve ear setting and seed setting rate. It is recommended to choose the weather with clear weather and no wind for application, and the dosage must be controlled.

You need to play separately, not all of them, and then grow a little shorter, and you can play this one a little more alone.