What s going on with the squeaky wheel of the washing machine

If it is a continuous squeak, it may be that the motor is short of oil, if it is an intermittent squeak, it may be a belt slippage (double barrel washing machine), or a lack of oil on the roller shaft (sleeve or automatic washing machine), if it is a squeak accompanied by the sound of "card, card", then it may be a foreign body under the wave wheel, which should be taken out in time.

1. Inspection method: The washing machine wave wheel rotates to make a "creaking" friction sound. During maintenance, you can put water in it and check it without clothes.

At this time, if there is still a "gurgling" friction sound when the wave wheel rotates, it means that it is caused by friction between the wave wheel and the bottom of the laundry bucket when it rotates.

2. Cause of failure and repair method: It may be that the wave wheel screw is loose, the wave wheel can be disassembled first, and then a washer of appropriate thickness can be added at the bottom of the shaft to increase the gap between the wave wheel and the bottom of the barrel. Eliminate collision or friction between the two.

If the outer ring of the wave wheel touches the laundry bucket, the wave wheel should be removed, repaired and reinstalled.

There are two situations, the first is that the bearing of the washing machine is worn or damaged, and the second is that there is a sound caused by the friction of foreign objects in the bearing.

Most of this situation is the lack of oil in the axle wheel, you drop a few drops of lubricating oil The sound will be no or much lighter, if the oil is still loud, it may be the bearing deformation, then you have to send the maintenance department to replace the bearing.

Generally, there is an abnormal noise, that is, the bearing is flooded, there is a lack of oil, it is the bearing ringing, like this, it will not take long, it is recommended to replace the bearing.

After a long period of use, let's do it, the lack of oil and wear of rotating shafts and gears causes abnormal noise, so let people repair it and replace the accessories.

There is pretticity of the spline of the shaft which may be the spline of the roller.

Isn't it the sound that comes out when it stops?

When using the washing machine, it is common to encounter some old washing machines that make all kinds of annoying noises. What should I do if the washing machine is noisy? The installation is uneven and noisy.

Regardless of product quality factors, some installation and use issues can cause the washing machine to be too noisy. For example, the installation of the washing machine is uneven, the drum belt is too tight, the wave wheel is deformed, the bottom of the laundry bucket is rubbed, etc.; In fact, with proper adjustments and simple repairs, vibrations and noises can be eliminated or reduced. For example, when washing, the machine makes a "pop" sound.

The fault is mostly due to the collision between the laundry bucket and the shell, or the uneven ground where the washing machine is placed, or the poor contact between the four feet and the ground. At this time, it is necessary to adjust the center of gravity of the washing machine, place it smoothly, or place a suitable mat on the four foot mats; "When washing, the wave wheel rotates, making a "gurgling" grinding sound. When overhauling, you can put water, and do not put clothes during inspection.

At this time, if there is a "gurgling" friction sound when the wave wheel rotates, it means that it is caused by the friction between the wave wheel and the bottom of the laundry bucket when it rotates, and the cause of the failure may be the loosening of the wave wheel screw, you can remove the wave wheel first, and then add a gasket of appropriate thickness to the bottom of the shaft to increase the gap between the impeller and the bottom of the barrel. If the outer ring of the impeller rubs against the washing barrel, the impeller should be removed and reinstalled before installation.

There are two situations caused by the first situation, the bearing of the washing machine wave wheel is worn, fierce or crushed, and there is an abnormal sound, and the first situation is that there is a foreign body contradiction on the surface of the bearing.

On the eighth day of the Lunar New Year, I hope that all of you: get rich and get rich without worrying, and send out wealth and poverty; The development of development does not get angry, and the cause has a good future; Be happy and wealthy, not angry, and smile happily. Best wishes to each and every one of you:

What you make is a lot of money, you enjoy a lot of blessings, you have no worries for a lifetime, and you have countless money in a lifetime!

Suspicion of a barrel rubbing the lid or outer barrel.

1. You can remove the barrel and check to see if there are any traces of scraping.

2. Boot check.

3. Put down the washing machine and check again, if you still don't find the problem, remove the lower part of the washing machine and have a plastic box.

4. When restoring, it was found that there was a sassafras mark on the inside of the frame, which may be that the previous master had reversed the frame, which caused the motor belt coil to tighten the screws of the motor shaft and the large frame frame, making a 'click' sound, because the outer barrel should shake when washing, and all the sound was emitted.

5. The pawl is not separated or the clutch is broken, and there is another situation that the lower part of the pawl rubs against the belt disc on the clutch, add more butter.

6. It may be that there is a foreign object in the washing machine, just take it out.

7. It may be caused by the aging of the clutch.

8. It may also be caused by belt wear. It is recommended to find a professional maintenance personnel to disassemble and check.

There is a possibility that the zipper or hard object on the clothes has touched the wall of the washing machine barrel; There is also a possibility that there is a problem with the power transmission system of the washing machine, and the landlord can call ** to ask customer service.

1. If the washing program also has this sound, there should be a foreign body falling into the interlayer between the inner barrel and the outer barrel, which requires the maintenance station to open the inner barrel to take out the foreign body.

2. If there is only a sound when the drying procedure is running, it may be caused by the wire fixing between the outer barrel and the casing, and the wire tapping on the barrel or casing. Open the back cover and check that it is secured.

3. If there is a problem with the 4 hanging springs between the outer barrel and the casing, they will also vibrate abnormally when spinning dry, open the upper cover of the machine for inspection. To identify where the sound is coming from, if it is under the wave wheel, you should first unscrew the wave wheel screw and take out the wave wheel to see if there is any foreign object underneath. If not, it should be that the spring on the bearing is broken.

4. Try whether the operation of the clothes will be loud, if the clothes will not squeak, it is caused by the clothes not being flat.

The drum washing machine originated in Europe, and the washing method is designed to imitate the principle of beating clothes with a stick hammer. The drum washing machine is made of stainless steel inner barrel, mechanical program controller, phosphating, electrophoresis, spraying triple protection of the shell, and a number of bulky cement blocks to balance the huge centrifugal force generated when the drum rotates to do repetitive motion, plus the joint action of washing powder and water to make the clothes clean.

Because the materials are mainly made of steel, the life span is generally about 15-20 years.

There may be the following reasons why a drum washing machine clicks when it rolls:

The base of the washing machine is unbalanced. If the installation of the washing machine is unbalanced, or the ground is uneven, it is easy to cause the washing machine to make a clicking sound when stirring.

Pulley bearings are damaged. Drum bearings are one of the important components inside drum washing machines, and if the bearings are damaged or rusted, it often causes the drum to rattle when it turns.

Birdcage drum beating. Some front-loading washing machines use a birdcage drum, which makes a knocking sound when the clothes inside are stirred.

There is a foreign object inside the drum. If some hard objects, such as coins, cufflinks, zipper pulls, etc., get into the drum by mistake during laundry washing, it will also cause the drum to click when rolling.

Transmission failure. There are some transmission devices inside the drum washing machine, such as belts, motors, etc., and if these devices fail, it may also cause the washing machine to make a clicking sound when rolling.

If this is the case, you can first check whether the base is balanced and check whether the roller bearings are damaged or rusted. If necessary, it is best to contact a professional for overhauling.

When using a front-loading washing machine, there is a possibility that there will be a clicking sound when rolling, what is the reason for this?

First of all, we need to know how a front-loading washing machine works. The main components of a front-loading washing machine are the drum and the motor. During use, the motor drives the drum to rotate, and the washing liquid and laundry are mixed together to achieve the function of laundry.

If there is a clicking sound when the drum is rotating, it may be caused by the following reasons:

1.Drum bearing damage: The drum bearing is the support point for the drum to rotate, if the bearing is damaged, it will cause the friction to increase when the drum rotates, which will cause a clicking sound.

2.Drum tire wear: The drum tire is the medium between the drum and the motor, and if the tire is worn and causes it to malfunction, it will cause the drum to spin out of balance, resulting in a clicking sound.

3.Overloading of the drum: If the drum is loaded with more laundry than the washing machine can handle, it can cause the drum to lose its balance, resulting in a clicking sound.

In response to the above reasons, we can take the following measures:

1.Replacement of roller bearings: If the roller bearings are found to be damaged, they need to be replaced in time.

2.Replace the roller tires: When you find that the roller tires are worn out, you need to replace them with new tires to ensure the drum is balanced.

3.Control the amount of laundry: When using a drum washing machine, load the laundry according to the number of clothes specified in the manual to avoid overloading and causing the drum to lose balance.

In short, the mold clicking sound of the drum washing machine is not a big problem, but it is necessary to find out the cause in time and take corresponding measures to solve it. If there is a clicking sound caused by other problems, it is recommended to consult a professional or seek repair service in time.

The semi-automatic double cylinder wave wheel of the washing machine is generally a reducer failure. The sound of the fully automatic wave wheel washing machine is a clutch failure.

Summary. Hello, if the drum washing machine has an abnormal sound, first of all, you have to exclude it, whether the position you place is balanced, and if the washing machine is not balanced, there will also be abnormal noise.

Hello, if the drum washing machine has an abnormal sound, first of all, you have to exclude him, whether the position you place in the morning is balanced, if the washing machine is not balanced, there will also be land sleepiness and abnormal noise.

The second one in the brief tour may be. If the washing machine itself fails, it may be that the motor is faulty, or it may be that the individual parts of the washing machine and the grinding belt shell of the washing machine collide and cause the barrage.

The above are the causes and solutions of abnormal noise.

It may be due to a loose screw at the bottom or a sound caused by poor contact. If the V-belt slips or falls off, the distance between the electroosmotic machine and the clutch will be increased, and the problem of creaking will occur during use. It may be due to the fact that the amount of laundry is too much, and it has exceeded the load-bearing range of the washing machine, and this situation does not move.

Suggested solutions: 1. In view of the loose screws, you can first turn off the power of the washing machine, clean up the water and clothes inside, and then put the washing machine down to fix the loose screws or nuts, and then restart after fixing to see if there is such a sound. 2. The washing machine that has been used for a long time may be due to the long-term use of the V-belt, resulting in the belt slipping or aging problems.

3. In fact, in the process of washing clothes, it is recommended not to put too much clothes, because the load-bearing range of the washing machine is limited, and the weight beyond the scope of use is likely to have a certain impact on the motor of the washing machine during the use process.