How to choose the quality of floor tiles, how to choose the quality of floor tiles

The method of choosing a floor tile *** bad is as follows:

1.Look at the surface:

The pattern is clear and the texture is unified.

1. Smooth and smooth, and the special pattern is consistent with the concave and convex. The color tone is harmonious and unified, and the observation feels full of color without chromatic aberration.

2.Look at the size:

The size is regular, there is no big head, the angle of the chamfer is accurate, the four sides are straight and square, and it should be placed at any corner on the same horizontal plane, and there should be no warping and warping angle.

3.Look at the embryonic color:

The embryo color feels white and natural, the raw material impurities are very few, the thickness and material are uniform, and there is no obvious unevenness in thickness.

4.Look at the packaging:

The product packaging is exquisite, sturdy, the font printing is clear, the batch number and color number are clearly marked, and the package should have the factory inspection report, certificate, manual, etc.

5.Look at the thickness:

Generally, the thickness of ceramic tiles should be greater than 8, and the bricks that are too thin are easy to break during construction due to their low strength, and the construction is difficult and not durable.

6.Listen to the sound:

Gently knock on all parts of the brick with an iron tool, the sound should be uniform, the sound is crisp and there is a metallic sound of the brick, generally the brick body is fine, high strength, structural strength, good durability.

Precautions for choosing floor tiles:

1. Soaking in water: When soaking in water, the tiles must be completely invaded into the water, and the time is generally about 30 minutes.

2. Base layer: When paving stone and porcelain tiles, standard blocks must be placed, and standard blocks should be placed at the intersection of crosshairs and installed diagonally.

3. Gaps: When tiles are paved, there must be enough gaps to make them shrink to a certain extent.

4. Cleaning: After the adhesive material is solidified, the joints can be brushed with white cement, gypsum mortar, and color paste.

To see if the color of the tile is pure. Mainly observe whether the color of the back of the tile is uniform and consistent.

It is necessary to observe whether the particles of the cross-section of the tile are fine. The cross-section here does not refer to the cutting surface around the tile, but to the tile fragments.

of the fracture. Generally speaking, the fracture is fine, hard and brittle, and the color is the same. Because the ceramic tiles with fine particles have strong waterproof ability, while the tiles with large particles are easy to soak in moisture, which affects the quality.

Pay attention to the thickness of the glaze layer. The thickness of the glaze layer is the thickness of the cross-section of the glaze. Glaze is the most expensive material in the cost of ceramic tiles, and the thicker the glaze, the better the quality.

To listen. Tap the tile to pay attention to whether the sound is crisp, such as the sound is clear and pleasant, such as the sound is dull, it is inferior.

Test the waters. Consumers can pour some water on the back of the tile and pay attention to how quickly the tile absorbs water. After a few minutes, see if the marks left by the water on the front are obvious. If the density of the tile is high and the water leaves no obvious mark, it is the best grade.

Warpage. Take two bricks back to back and face to face to see if they can be in close contact, and there is no phenomenon that the gap is too large to judge whether there is warping.

Rap. Consumers tap the floor tiles with their hands.

On the surface, the crisp sound is the top grade.

Look at the surface: the pattern is clear, the texture is uniform, smooth, and the special pattern is concave and convex. The color tone is harmonious and unified, and the observation feels full of color without color difference.

2.Look at the size: the size is regular, no size head, the chamfer is accurate, the four sides are straight and square, and should be placed in any corner of the same horizontal plane, and there should be no warping.

3.Look at the embryo color: the embryo color feels white and natural, the raw material has few impurities, the thickness is uniform, and the material is uniform, and there is no obvious uneven thickness.

4.Look at the packaging: the product packaging is beautiful and sturdy, the font printing is clear, and the batch number and color number are clearly marked.

The packaging should contain the factory inspection report, certificate, instructions, etc. 5.Look at the thickness:

Generally, the thickness of ceramic tiles should be greater than 8mm. Bricks that are too thin are easy to break during construction due to their low strength, which is difficult to construct and not durable. 6.

Listen to the sound: Tap all parts of the brick with an iron tool, the sound should be even, and the sound should be crisp and metallic.

The selection of floor tiles can be done through appearance, sound, water droplets, edge length measurement, and hardness.

1. Appearance. The selection of floor tiles should start with its appearance, to find a uniform and complete style of color and color, the surface is neat and smooth, there will be no protruding particles, and the edges are regular state hail rock. When buying floor tiles, you can take out a few floor tiles at will, and check it together to see if its surface will have color difference, deformation and damage, etc., if there is a need to replace it in time, the quality of this floor tile is not particularly good.

2. Sound. After choosing the right style of tile, you should identify the quality of the floor tile by listening to the sound, gently knock the floor tile with something harder, and listen to the sound is not more crisp, the more crisp the tile will be porcelain, and the quality of the floor tile will be better.

3. Water droplets. Floor tiles are the floor decoration materials used in every area, and the waterproof performance of floor tiles is very important. When choosing a floor tile, you can turn it over, drop a few drops of water on the back, see how quickly the water droplets disperse and absorb, if the speed is relatively slow, the density of the floor tiles is better, and the quality of this floor tile is also better.

Fourth, the side length measurement.

If the ground wants to have a good paving effect, the measurement of the side length of the floor tiles must be accurate, and its high accuracy and paving effect will be very perfect. When purchasing floor tiles, you need to use a tape measure to measure each floor tile, and there is no difference in side length, size, thickness and other issues.

5. Hardness. The floor tile is a style with higher hardness, and its service life will be longer. Floor tiles have good hardness, high strength and are not fragile, and this kind of floor tiles are high-quality and good tiles. Boy.

How to choose the quality of tiles: look at the appearance, listen to the sound, drip, detect the hardness, measure the length of the edge. 1. Look at the appearance First of all, when we choose tiles, the most intuitive way to distinguish the good from the bad is to look at the appearance.

The appearance of the tile is uniform and complete, and the color is clear and beautiful. And the surface is flat without depressions, and the edges are relatively regular, so the tiles are better.

2. Listen to the soundIf you want to choose the best tiles, you must learn to distinguish the sound made by the tiles. You can hit the tiles with a hard object like a small hammer. If the sound is crisp, it proves that the quality is good.

If the sound is dull and muddy, do not choose such tiles. 3. Water dropsIf you want to buy more durable home tiles, you should check the water absorption rate of the tiles. A few drops of water can be dropped on the back of the tile.

If the water absorption rate is particularly slow after the water droplets are dispersed, it proves that the water permeability of the tile is not high, and the failure rate of the tile is close, you can buy such a tile, otherwise don't buy it. 4. Test hardnessThe hardness of ceramic tiles also determines the quality of ceramic tiles. It is certain that the harder the tile, the longer the service life.

The detection method is that we can use two samples of hidden vibrating tiles, let their water chestnuts collide with each other, and then observe whether there are scratches or powder on the tiles, the hardness of the powder is relatively low, don't buy this. 5. When measuring the length of the side and buying imitation tiles, you must bring a ruler. The higher the accuracy of measuring the edge length of the tile, the better and more aesthetically pleasing the paving will be.

1. Check whether there are defects on the floor tiles, such as missing sleeves, cracks, corrugations, etc., which are of poor quality and unavailable. 2. It can be tested by listening to the sound of the remaining bricks on the floor: tap the difference between the middle and lower parts of the floor tile with your hand, if the sound sounds crisp, it means that the quality of the floor tile is very good.

3. It can be distinguished by the speed of water absorption: drip on the back of the floor tile and lack of water, observe the speed of water absorption, if the water absorption speed is slow, it means that the floor tile is *** and has good waterproofness. On the contrary, if the water absorption rate is fast, it means that the quality of the floor tiles is poor.

4. It can be distinguished by measuring the side length size of the floor tile: under normal circumstances, the floor tile with better quality has a higher accuracy of the side length, the error of the four side lengths must be less than, and the flatness of the floor tile must be less than, if this is not the case, it means that the quality is poor. 5. You can look at the appearance of the floor tiles to distinguish, the appearance of the floor tiles is consistent in both pattern and color, and there will be no big difference.