The Meizu mobile phone got into the water, and the water threw it out, and there were still traces

Because the mobile phone is waterproof, the waterproof and sealing of the mobile phone are better, so after the overall water of the mobile phone, a small amount of water will not be able to completely dry the water because of the sealing of the mobile phone, etc., if you want to dry the water as much as possible and keep the mobile phone in normal use, you can try the following steps:

Open the back cover of your phone with your fingernails or a gadget, and hold it on your side.

Use a hair dryer to blow hot air in the direction of the battery, dry the inlet water, and try to let the water flow to the edges; Or take it to a sunny place to dry.

If the water traces are very obvious and not easy to dry, in order to ensure use and safety, it is recommended to go to the after-sales service or mobile phone repair shop to have the engineer disassemble the machine and take the screen for processing.

Dear Hello, I'm glad to answer for you, the following is the answer to your query, I hope it will help you If the Meizu phone is flooded, you follow the steps below:1Turn off the mobile phone immediately to avoid short circuits or circuit damage to the electrical current.

2.Try not to shake or vibrate your phone to prevent it from entering deeper parts. 3.

Use a dry towel or paper towel to gently wipe the water droplets off your phone. 4.You can put the phone in a sealed plastic bag, add some desiccant (e.g. silicone bag, rice, rice or dry flour), then seal the mouth of the bag and leave it for a while.

Do not attempt to turn on or charge during the process)5Keep your phone in a hygroscopic agent, such as raw rice, which helps absorb moisture. 6.

It's best to disassemble the phone, dry the parts separately, and then reassemble them. Warm reminder: Entering the Kai socks water mobile phone will cause permanent damage to the circuit and other components, so it is best to back up important data before doing anything Oh Dear The above is all my reply, I hope to help you, I wish you a happy life

1. Dismantle and salvage the phone as soon as possible, and immediately remove the battery to prevent short circuit; At the same time, the SIM card should be removed so that you do not lose your contact information, and the longer it stays in the liquid, the more damage your phone will suffer for life.

2. Wipe each part of the mobile phone with a cloth or paper towel, do not move or shake the mobile phone too much, and swim around the inside of the mobile phone with a travel cover free of water.

3. Try to wrap your phone in a cloth or tissue for a few minutes to create a small "vacuum effect" to suck out excess water, and then put your phone in a place with warm air circulation for a few hours.

4. Put the remaining ruler of the mobile phone into a jar or bag full of rice for at least 24 hours, during which time it can not be turned on, the water absorption of rice is very good, which can help absorb the moisture in the damp mobile phone.

1. Wipe the residual water on the outside of the mobile phone with paper;

2. Then turn the mobile phone over and place the mobile phone screen down horizontally, which can prevent water from flowing to the main board of the search shed to the greatest extent;

3. Use the cold air of the hair dryer to dry the water, and do not use the hot air to blow directly to the screen, which will also cause damage to the LCD screen;

4. Finally, wipe the circuit board and other places with anhydrous alcohol, and then try to turn on the machine;

5. If the above steps do not solve the problem, it should be sent to the maintenance point for maintenance in time.

Since mobile phones are delicate electronic products, there will be varying degrees of damage to the inside of the machine after water ingress, and the machine failure may become more and more serious over time.

It is recommended that users go to the local Meizu authorized service experience center for testing and maintenance or return to the factory for inspection and maintenance, and the user can contact customer service to return to the factory by themselves, or they can return to the factory through the local store.

Meizu 3 mobile phone fell into the water solution.

After the mobile phone enters the water, first of all, please open the back cover, remove the battery directly, (no matter if it can't be removed), don't turn on the phone and then shake the water hard;

If the Meizu phone gets into the water, you can put it directly into the rice; For other mobile phones, just pull out the battery, then put the phone in the rice and wait for 24 hours. The water absorption of rice can absorb the moisture of the phone.

It is to return the phone to the factory for repair as soon as possible if it cannot be solved. You can return to the factory through the local Meizu certified store, or return to the factory yourself, or if there is an authorized service experience center in your area, you can also directly repair it at the Meizu authorized service experience center.

After the mobile phone enters the water, in order to avoid further damage, it is recommended that you: Step 1: Quickly remove the mobile phone from the water, for the removable battery, quickly unplug the battery, and remove the SIM card and memory card; If the battery is not detachable, take out the SIM card and try not to operate the mobile phone again; Step 2:

Use a paper towel to blot the visible water stains, wave the phone with appropriate force to keep the liquid inside and outside the phone as far as possible, quickly place the phone in a cool and ventilated place until the moisture disappears from the phone, or use the cold air of a hair dryer to dry the body; Step 3: After simple treatment, be sure to send it for repair as soon as possible.

1 Power off as soon as possible.

2 If it falls into corrosive liquid (e.g. seawater), rinse the machine with clean water immediately. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

3 Disassemble the machine as soon as possible. But take your time when disassembling the machine.

4 Clean with alcohol or professional washing water.

5 Assemble. Or take the whole pile of what you took apart and hand it over to the repair point. Let the repair point clean and assemble it again for you.

Dry the phone first, and then try to do it, if it doesn't work, you can throw it away, because you don't have a warranty for this, and the repair fee is very expensive, enough to buy a new one.

Don't turn it on, pick it up and shake the water, and then blow it with a hair dryer for half an hour. After blowing, leave it for two or three days before turning it on! However, there is more luck and less luck, and the motherboard is generally changed for this kind of mobile phone to enter the water! Good luck to the landlord!

Take it to repair the phone and repair it....What else can I do...Do not turn on.

Tear down everything that can be dismantled.

First of all, you've got to catch it quickly, right? Then disassemble it, remove the SIM card, battery, and other things that can be removed, and remove the water.

Then find a way to remove the water, remember, do not use paper towels, toilet paper, and never use a hair dryer, preferably with a dry cloth or towel, to wipe the water off. All that's left is to find a way to dry the phone thoroughly, if there is a desiccant is the best, if it really doesn't work, just stuff the phone into a bag of rice or wrap it in a towel and leave it overnight. The next day, reinsert the SIM card and battery, and if it turns on normally, congratulations, your machine is not drowned.

If you can't turn it on, find customer service.

Of course, such a rescue guide is only limited to first aid, and does not guarantee that your phone will be in good condition, so users should be careful when using the machine.