There are many ways to go through hydropower, what are the ways to go through hydropower?

In our renovation construction, waterway renovation is the top priority, which is related to the long-term use needs of our new house after it is settled. However, because it is a concealed construction, the line transformation can not be seen after the decoration, so it can avoid problems in the later stage and do a good job in the later maintenance, so special attention should be paid during construction!

Because there are many ways to go for waterway transformation, first of all, we choose the quality assurance brand and the manufacturer's warranty to choose different water pipes! Our conventional way is to walk from the top, put the joints of our water pipes on our roof, so that we can repair the leakage of the joints in the later stage and reduce the loss in time, and the wall is vertically slotted, which will not damage the structure of the transverse surface of our wall, because according to our requirements, the construction materials and labor costs of the top walking method are very high!

The ground walking method is to carry out waterway construction or slotting on the original ground, which is the advantage of fast construction speed and low cost, but naturally there are many disadvantages. Some floors need to be covered with water pipes and need to be tiled entirely, resulting in the entire ground being too high. For example, slotting solves the problem of improving the ground.

The most important thing is that if there is a leak at the joint in the later stage, we will not find it in time, because the downstairs neighbor has the danger of soaking in water, which will cause great economic losses, and the repair of the problem in the later stage is very complicated, including the removal of the walls and floors that we originally renovated.

We will choose national standard wires for the circuit, which guarantees the safety of our future lives. We do our best to choose point-to-point routing in the routing pattern. The advantage is to save money and trouble, which can solve the problem in the later stage.

Point-to-point to ensure that the wires in our conduit can be pulled flexibly and can be replaced later. If there is underfloor heating in the home, it is inconvenient to groove the floor. We recommend that the wires should be connected to the top of the ground or to the edge of the wall.

The circuit structure requires the socket to be led from the nearest socket, which can reduce the extra wiring in our home. The horizontal groove of the wall should not exceed one meter as much as possible. In order to prevent damage to the wall structure, it is recommended to go to the top floor if there is underfloor heating on the ground.

Therefore, for our long-term use and life in the future, we must understand and take a serious look at the transformation of our home's water circuit, so as to avoid possible safety problems in time and create a comfortable home.

Generally, the water and electricity walking method will hide them in the beams, so that they will not be exposed, and the wiring is also to choose a relatively smooth wiring, and there will be no knots, so as to ensure that the connection can be used normally, and it is relatively safe.

There are walking the sky, walking on the ground and walking on the wall, and now the decoration, the most popular should be the ground. And in later life, if there is a problem, the owner is also very easy to repair.

There are many ways to go through hydropower, what are the ways to go through hydropower? One is to walk on the roof, which is easy to maintain, but the water pipe will always be exposed to the air, and the service life is much shorter; When the circuit goes to the top, it is necessary to destroy the longer wall surface, and the wires used are also longer. The second is to go under the floor, the installation time is short, the materials used are less, and it can also be protected in concrete, and the service life is long.

However, if there is a problem with the pipeline, the floor needs to be dismantled for repair, and if it is a tile, the floor tile needs to be smashed. The third is to walk the wall, the material used in this method is relatively small, and some material costs can be saved, but the installation difficulty is relatively high, and the wall needs to be grooved, so the construction period is longer, and the wall will be damaged. Fourth, it is best to think about the electrical appliances and water equipment before doing hydropower transformation, so that the location of hydropower can be arranged, and it will be more convenient to use in the future.

Generally, people use the method of dark lines, which will lay water and electricity pipes on the ground, under the floor tiles, some will also be laid on the roof, and some will also walk through the wall, which is generally more common.

Hydropower is a very important project in home improvement, because they are relatively hidden, if not done well, it will be very troublesome to repair in the future. There are three ways to go for hydropower, so what are the three specifics? Let's find out together!

1. Go to the top. The method of water and electricity topping is convenient for repairs in case of failure. However, the water pipe is exposed to the air for a long time, which is affected by the pressure of the water flow, which will shorten its service life.

Which only the circuit goes to the top, the switch socket is about the height, if the top wall is damaged for a long time, the wires used are more than the ground.

2. Walk the ground. Hydropower can be installed in a short period of time, which can reduce expenses, and can be protected by concrete for a longer service life. But if there is a problem, it is more troublesome to repair, the floor needs to be pried open, and the water pipe is difficult to detect.

If the home is covered with wooden floors, then the economic damage will be more serious after a long time.

3. Walk the wall. The material used for the pipeline wall is relatively small, which can save some costs. However, the difficulty of installing the wall is relatively high, and it also needs to be slotted, which will cause certain damage to the wall.

What should I pay attention to in hydropower installation?

1. When designing the waterway, it is necessary to think about what equipment uses water, and plan the installation location and installation method.

2. In addition to installing washing machines, wash basins and other water outlets in the bathroom, it is also necessary to install another faucet, so that it is convenient to connect water in the future.

3. During the water pipe pressure test, it is best to ask the property to be present to play a supervisory role and avoid being deceived. When the water pipe is pressed, the return valve of the pressure pump needs to be formed into a circuit to see if there is pressure in the tube.

4. After installing the waterway, check whether the waterway at each point can be kept smooth. For example, each drain outlet of the faucet such as kitchen and bathroom, balcony, etc., if you find that the drainage of the faucet is not smooth or the drainage is relatively slow, you should let the property dredge it in time.