The old house is renovated with water and electricity, and it is better to bury the wires on the gro

The old house is renovated with water and electricity, and it is better to bury the wires on the ground or on the wallThe answer to this question depends on several factors. First of all, you need to consider the local market price and the budget for the renovation.

With the decoration device, you only need to enter the area + city, and calculate the most affordable local market in 3 seconds**: [Tuba Rabbit Big Platform Counts**].

No longer worry about the company's price increase, omission and price increase.

In some areas, burying power lines in the ground may be a common practice. The advantage of this is that it can reduce the wires on the wall, making the wall more neat and beautiful. In addition, buried wires can also avoid the exposure of electrical wiring, reducing safety hazards.

However, burying wires in the ground requires ground excavation and pipe burial, which is a large amount of work and may increase the cost of renovation.

On the other hand, burying wires in a wall also has its advantages. The amount of work is relatively small and the cost is low. In addition, wall wires can be more easily repaired and replaced, as the wires are exposed to the wall and are easy to inspect and operate.

To sum up, the choice of whether to bury the wires in the ground or in the wall depends on the individual's needs and budget. If you're looking for a neat and beautiful wall, and you have the budget, burying your wires in the ground may be a good option. If you're concerned about cost and ease of repair, burying wires in a wall may be more suitable for you.

It should be noted that no matter which way you choose, you should find a professional electrician to carry out the construction to ensure safety and reliability. In addition, depending on the local market price, the range of thread lift may vary. It is recommended that you consult your local renovation company or electrician before choosing to understand the specific ** and construction plan in order to make an informed decision.

Hello, the current circuit transformation has basically adopted the pre-embedded method of partition grouping and multi-loop, there are more line pipes, and the main line pipes are basically on the ground, and only under the switch socket is on the wall.

If there is a ceiling, there is also a use of the top type, the advantage is that the laying of the line pipe can avoid the construction process of human trampling, to prevent the underground for a long time after the line pipe has water accumulation, future maintenance or transformation without chiseling the floor, the bad is that the installation is complex and difficult, the line is lengthened, the price is high and the consumables are more.

If the line pipe is on the wall, one is to go around the wall will cause the line to be much longer, the second is that too many transverse grooves of the load-bearing wall or cylinder will seriously affect the load-bearing of the wall, the third is that the installation is complex and difficult, and the third is that the wall is covered with too many transverse groove conduits, and it will be easy to nail a nail on the wall in the future life to nail to the conduit or even wires, which has potential safety hazards.

Although the current pipe laying is mainly on the ground, but now the master and even the regular decoration company, on the same wall near the two switch sockets or water outlets, are directly open the horizontal groove to lay the pipe, the purpose is to shorten the length of the slotting and the installation length, improve efficiency, but this is only convenient for the master, but it is difficult for the owner (usually the owner is not able to think of any problems at the time), in the future the owner wants to nail or drill holes in the wall, but be careful of thunder, once hit the wire or through the small pipe, That's not a small problem! Although the slotting requires horizontal and vertical length, it is convenient to remember that there is a tube, but not all of them can be done, especially for individual masters, many of the slots opened obliquely are visible all over the room.

So I personally suggest that when the hydropower transformation of the line pipe as far as possible to go to the ground or to the top, the wall only open the vertical groove without the horizontal groove, the wall of the two separate switch sockets using the "U" shaped slotted pipe, that is, down to the ground and then on the wall, although a little more material, but in the next few decades to nail and drill holes, there is no need to worry about the switch socket, angle valve faucet on both sides of the pipe, which I think is very worthwhile.

Personal understanding and experience, I hope to help you make a reasonable decision!

The following is an example of the horizontal groove, such as trying to use the vertical groove is actually not much more material, but the master has to work hard:

Personally, I think it is better to walk the wires in the hydropower renovation or go through the wall. On the one hand, it is more convenient to walk through the wall and save money. Nowadays, most people will fix switches and sockets to the wall, and the wires can also facilitate the laying of sockets and wires to the greatest extent and save decoration costs.

On the other hand, there are other pipes such as underfloor heating on the ground, so it is not easy to deal with the failure of the electrical wiring if it goes to the ground, and the entire ground needs to be destroyed. In addition, it is also safer for the wires to run through the wall, after all, there are water pipes and heating pipes on the ground, and if there is a water leak, the consequences are very serious.

It is better to walk the wire against the wall, first of all, because it is more convenient to walk on the wall. Generally, when people are decorating, they will choose wires to go to the wall, after all, the wires only need to be slotted in the wall, and most of the sockets and switches are installed on the wall, and the wires are more convenient for switches and sockets to be wired, and it is easy to deal with problems；Secondly, it is more reasonable for the wires to go through the wall。If the wires go to the ground, there are water pipes and floor heating pipes underground, so it is not only unreasonable to lay all three pipes together, but also has potential safety hazards.

When there was a problem with the wires, the floor had to be removed in order to repair the wires. The problem of wires running the wall is easier to deal with, and the wall restoration is relatively simple; Finally, for the sake of safety。Water pipes are generally laid underground, and laying wires underground is obviously not as safe as walking on the wall, after all, the wall is an insulator.

It is not prone to danger. <>

Because we will install sockets and switches on the wall when we are decorating, it is easier to run wires through the wall, and it is easier to wire switches and sockets. <>

There are water and heating pipes underground, and the wires will undoubtedly look messy, and there are safety hazards, and it is very troublesome to deal with problems. <>

Wires generally need to be kept away from water, and if they go to the ground, they will overlap with heating pipes and water pipes, which is a hidden danger, and walking on the wall is the safest way.

1: In fact, if you want to give the better to walk on the ground and the wall, you must first look at what the construction site conditions are? Otherwise, there is no comparison.

2: Under the same conditions, if the wall is a light brick, of course, it is better to walk on the ground than to walk on the wall, and if it is a red brick, it is also good to walk on the wall. (However, the wall cannot be opened horizontally and long-distance trunking, otherwise it will affect the wall structure).

3: Some areas need to be clothed with floor heating, and the current hydropower material process is upgraded. You can use flame retardant wires and flame retardant wire pipes, which again don't cost much.

It saves a lot of money than going to the wall or going to the top to save materials. Those who say that the water goes to the ground and the leakage is not easy to repair are either the decoration company, or they are not confident in their own technology. No matter how good the hot melt water pipe is, in the eyes of the skilled master, it can only rank second, and it is popular among the people:

Seven points of technology and three points of material. That is to say, no matter how good the material master's craftsmanship is, it is also a bad result, and no matter how ordinary the material is welded well, the ultimate quality can be achieved.

It is better to walk the ground, so that it is more convenient to install the socket, and at the same time it can also save materials, the cost is very cheap, and then all the pipes are surrounded by tamped soil, which can protect and fix the pipe, you must choose high-quality materials, and you should also find a regular decoration team.

I think it's better to walk on the ground, the pipeline installation is easier, and there are not many materials, but you must pay attention to the material of the wire, because the later maintenance is more troublesome.

I think it will be better to go to the ground, the installation is simple and the cost is low, that is, we should pay attention to the quality of the materials.

In house decoration, water and electricity renovation is a crucial step in the decoration, and a good foundation must be laid. No matter how the later decoration is, if the water and electricity renovation is not good, everything will be in vain. The latter stage is related to the general layout of the dwelling.

So, is it to decorate the top, the ground, or the walls with hydro? Which is better? Now let us give you a good analysis.

Does hydropower rebuild go to the top, the ground, or the wall?

Hydro remodeling is usually done on the top or on the ground, and rarely on the walls, where the horizontal slotting of the walls is very irregular.

1. Hydropower renovation to the top: Roof walking does not mean slotting in the roof, but walking along the corner between the wall and the roof. It has the advantage of being easy to maintain and replace later.

If something goes wrong, it's easy to maintain and won't penetrate downstairs. The downside is that walking on the roof wastes water pipes. Generally speaking, the ceiling should hide the water pipes to ensure aesthetics, and the cost will increase a lot.

Pros: (1) The first benefit is to avoid complicated procedures. When the water and electricity are installed in the ceiling, there is no need to groove in the floor, thus avoiding complicated procedures.

2) The second advantage is easy maintenance. Install the wires on top. If there is a problem that needs to be repaired later, the ceiling can be opened directly for repair or inspection. It's more convenient and quick, and won't damage the wires.

3) The third advantage is that the hydropower cap reduces the risk factors of water ingress into the pipeline, short circuit and electric shock.

2. Hydropower renovation and walking: Compared with walking on the roof, it saves materials, the overall cost is much cheaper, and the safety of burying water pipes on the ground is also very high. However, if there is a problem with the water pipe, the floor should be pried open, and it will be more troublesome to maintain later.

When choosing to walk on the ground, we have to make sure that the water pipes are of good quality.

Advantages: (1) Water and electricity are convenient to connect on the ground, the overall effect is very simple, and the construction of workers is relatively safe.

2) When decorating the pendant on the wall, you don't need to consider the safety of the line.

3) Compared with the ceiling, it can save the space height, no need for a large area ceiling, and can save the decoration cost.

When decorating the home, the renovation of water and electricity is very important, I personally think that it is better to walk the ground for water and electricity, and if there is a failure, it is also very convenient to repair.

I think it is better to walk the ground, you can avoid many problems, there are some walls that are not able to be slotted at will, and the decoration cost of walking on the ground and walking the wall is not the same.

It will be better to go to the ground for hydropower transformation, so that the space will be more sufficient, and the wiring will be more economical, and it will be convenient for maintenance and maintenance in the future.

In hydropower renovation, is it better to walk the wire through the wall or to the top? What should I pay attention to? In my hydropower transformation, it is best to walk the wire through the wall.

The wall is more convenient and more economical. What should I pay attention to? Pay attention to the standard of hose distribution on the principle of proximity, and if the socket switch is close to the ground, go to the grounding device; Approach the roof and walk to the roof.

In my hydropower transformation, it is best to walk the wire through the wall. The wall is more convenient and more economical. Nowadays, the vast majority of people will fix the power switch and power socket on the wall, and the paving of power sockets and wires can be conveniently located to the greatest extent according to the wall wiring, saving decoration costs.

On the other hand, because the ground also has other pipes such as underfloor heating, once the wires are placed on the ground, it is not easy to solve common faults, and the entire ground must be destroyed. In addition, it is safer to walk on the wall with a wire. After all, there are water pipes and heating pipes on the ground.

If there is water seepage, the adverse effects will be more serious.

As we renovated our house, we renovated the power circuit. In fact, we are forced to rely on the above criteria, that is, the criteria for the distribution of hoses based on the principle of proximity. In other words, if the socket switch is close to the ground, go to the grounding device; Approach the roof and walk to the roof.

However, there is an exception to the hydropower retrofit, that is, if we do not have a suspended ceiling, the upper socket row cannot be used to lay out the hose over the ceiling. At the moment, the only way to do this is to lay the pipes on the ground and then connect the cassettes along the walls.

In hydropower renovation, is it better to walk the wire through the wall or to the top? Hydropower transformation line topping advantage. If you use water and electricity to renovate the ceiling, the ceiling is not as moisture-proof as the ground.

If there is water seepage, it can be quickly detected and repaired immediately, so you don't have to worry about water seeping into the floor and harming the next door neighbors. Suspended ceilings are relatively easy to maintain. The advantages of ground hydropower transformation are more cost-effective by fully considering the saving of raw materials and labor costs.

Hydropower projects have ceilings, and people need to reach out to work, which is tiring and time-consuming. But if they walk on the ground, the difficulty coefficient of project construction will be reduced, and the construction period will be reduced. What's more, many hydropower masters are proficient in the professional skills of surface route engineering construction.

Take the tubing on the ground. Pipeline construction is very simple and does not use many raw materials. However, if water seepage occurs, it is less noticeable and the least inconvenient to maintain, which can lead to huge losses (e.g. wetting wood floors, destroying downstairs neighbors' kitchen cabinets and suspended ceilings).

Assembling will destroy the moisture protection of the ground! General workers like to walk in the soil, because the construction of the project is simple, do not have to worry about after-sales problems. Walking on the water pipe in the soil saves raw materials than walking on the roof, and it is also safe to bury the water pipe in the ground.

However, if there is any problem with the water pipe, the wooden floor must be smashed open, and it is more inconvenient to repair it later. When selecting the floor, it is necessary to ensure the quality of the water pipes.

It is better to walk the wire against the wall, first of all, because it is more convenient to walk on the wall. Generally, when people are decorating, they will choose wires to go to the wall, after all, the wires only need to be slotted in the wall, and most of the sockets and switches are installed on the wall, and the wires are more convenient for switches and sockets to be wired, and it is easy to deal with problemsSecondly, it is more reasonable for the wires to go through the wall