Why is there a hole in the bottom of the pot?

Mainly for the sake of permeability, because potted plants.

Different from ground-planted plants, after we water, if there is no small hole, then the water can not flow out, and the roots of the plant will be soaked, so the hole at the bottom of the pot is completely for permeability, so that when we are watering, if we water more, the water can also flow out from the small hole at the bottom, and will not soak the roots, and it is also conducive to the growth of the plant root system.

It must be used for ventilation, the purpose of leaving a hole in the bottom of the pot, once it is overwatered or attacked by heavy rain, the water will be discharged from the bottom hole, and the space left can be filled with air. In order to ensure good permeability, many pots do not always have one hole at the bottom, sometimes two, four or five holes.

There are small holes at the bottom of the pot to drain and ventilate, which can avoid overwatering, especially for planting succulent root plants, which not only requires a hole at the bottom, but also a lot of small holes in the middle of the pot.

First of all, plants need water and air to grow, if there are no holes under the pot, all the water for watering the flowers can not seep out in the pot, the roots of the flower are soaked in water for a long time, the roots will rot, and another purpose of opening holes at the bottom of the pot is to let the air circulate better.

If there are no holes under the pot, the water will not seep out in the pot, and the roots of the flower will rot if they are soaked in water for a long time. In order to allow the excess water in the pot to seep out in time, a hole was left in the bottom to keep the moisture of the soil suitable.

In fact, plants are the same as ordinary animals, and they also need to breathe. For plants planted on the ground, the soil has a certain air permeability, while the flower pots are not well breathable, so leave a hole.

In order to release excess moisture. It is difficult for the average waterer to grasp the amount of water, and would rather water more, and there is a hole at the bottom of the pot to release the excess water.

In order to allow the excess water in the pot to seep out in time, a hole was left in the bottom to keep the humidity of the soil suitable, so that the flowers could grow "healthily".

It has the effect of water and ventilation, but when planting flowers, it should be blocked with tiles or things in the screen window, otherwise the soil will leak. Raising flowers seems simple, but it actually contains a lot of knowledge.

First of all, a hole in the bottom of the pot allows water to circulate well, the air permeability is good, and the soil will remain in a very fertile state.

In fact, there can be no holes, but the flower grower needs to be able to grasp the amount of watering, and if he can grasp the watering without water accumulation, it is okay to have no holes. In fact, it is very difficult to do, so whether it is a master or a novice, they will buy a flower pot with holes, and if there are no holes, they have to punch their own holes.

If you're going out and no one is watering for a long time, you can put the pot in a basin with water. If you don't water for such a month, the flowers will not have a problem.

There must be a hole underneath the pot for raising flowers.

The pots have small holes mainly to permeate the water, because the potted plants.

Different from ground-planted plants, after we water, if there is no small hole, then the water can not flow out, and the roots of the plant will be soaked, so the hole at the bottom of the pot is completely for permeability, so that when we are watering, if we water more, the water can also flow out from the small hole at the bottom, and will not soak the roots, and it is also conducive to the growth of the plant root system.

Comparison of individual pots.

In terms of process difficulty, the larger the terracotta pot, the better.

It is difficult to do, difficult to fire, purple sand flower pots are second, ceramic flower pots (referring to the surface glaze) again, sandstone flower pots are second, FRP flower pots are again, plastic flower pots are again, and wooden flower pots are again.

In terms of artistic effect, the red pottery flower pot has the most artistic effect, followed by the purple sand flower pot, the second by the sandstone flower pot, the ceramic flower pot (referring to the glaze on the surface) again, the glass fiber reinforced plastic flower pot again, the wooden flower pot again, and the plastic flower pot again.

As for planting, terracotta flower pots are the most breathable, followed by purple sand flower pots, wooden flower pots again, cement flower pots again, sandstone flower pots second, ceramic flower pots (referring to the surface glaze) again, FRP flower pots again, plastic flower pots again.

Flower Raising Knowledge! There is a leaking hole at the bottom of the pot, except for lazy flower pots, normal watering will not rot the roots.

Hello, flower pots at home. Generally, there are holes underneath, so there is no need to punch holes. If it is a flower pot made by yourself, if there is no hole leaking at the bottom, the plant will be easy to rot roots, so it is recommended to make 1 or 3 holes.

The bottom of the pot needs to be punched, and after the bottom is punched, the air permeability of the roots is good, which is conducive to the growth of plant rhizomes. Different types of plants have different water requirements, so it is not so easy for both novices and veterans to control the amount of watering. After having a small hole, if you water too much, the stagnant water will flow out of the hole at the bottom of the pot, which can prevent the roots of the plant from being soaked and damaged.

Yes, there must be a hole underneath the pot. There are no holes under the flower pot, and the water accumulated in the pot cannot seep out, and the roots of the flower will rot if they are soaked in water for a long time. In addition, the roots of the flower not only absorb water, but also breathe air.

There are holes under the pots, and there is no water in the pots, and there are gaps in the soil, so that the roots can breathe smoothly.

It is still necessary to punch holes under the flower pots planted at home, so as to avoid the situation that the flower roots are soaked and rotten for a long time due to water storage, and maintain air circulation.

If you want to plant flowers at home, you must make a hole under the pot. With this hole, it will not accumulate too much water in the roots of the plant. necrosis of the roots can be avoided.

It is necessary to punch holes, so that the water and soil will be fully integrated, and it will also be conducive to the growth of flowers, otherwise the water will not circulate and the flowers will die.

When you put it under the flower pot at home, you should also make holes, which is a place for ventilation.

The hole under the flower pot does not need to be blocked, since the hole is a drainage hole, to ensure that the pot has a reasonable amount of water, to avoid the roots from being soaked in too much water and rot, and to ensure air circulation.

When choosing a flower pot, you should also pay attention to the size, the height should be appropriate, the flower pot is too large, just like a thin person wearing big clothes, which affects the appearance, and the flower pot is large and the plant is small, and the water absorption ability of the plant is relatively weak.

After watering, the potting soil is kept moist for a long time, and the flowers and trees have difficulty breathing, which can easily lead to root rot, and the pot is too small, which makes it appear top-heavy, and affects the development of roots.

It's hard to copy, that hole is a drainage hole, keep.

The pot has a reasonable amount of water to prevent the roots from being soaked in too much water and rot, and there is also a way to ensure air circulation.

1. After the hole in the underground of the flower pot is blocked, it is generally pierced along the perimeter of the pot. It is better to have the kind of reticular fibers of palms. You can wait for the soil to be changed and add the soil other than the roots into sand or coal ash.

Pour out the soil first, and keep some fibrous roots and the soil attached to the fibrous roots intact, which will not affect the plant life activities of your soil. After a week, if you don't see any improvement, tie it again, and then plant the plant and cover it, don't tie it too much.

2. Use chopsticks to poke into the soil. If it's the kind of flowers that are not resistant to waterlogging, or some dead leaves and small branches on the bottom. 2-3 at a time, pressing down slightly. But also avoid the taproot, it will definitely die, prick a few holes. It is convenient to dredge the water, and cover the holes with stone tiles in the basin.

How to plug the hole under the flower pot: a small tile or a small tile. Or bubbles. If you raise flowers, the hole under the pot is leaky, so that you won't drown the flowers with more water, and you don't need to plug it.

If this place can't be blocked, it's best to cover it with a tile and leave a gap, so that when watering, if you water too much, you can leak out of the seam.

That hole is used to drain excess water, and when it is blocked, it is easy to cause the flower to rot the roots.

Method 1: Special gasket.

Plant soil always runs out from the bottom and dirties the house. If you are afraid of trouble, you can buy a special gasket back.

Put it at the bottom of the basin and pour the soil directly. However, it is necessary to see the size of the gasket clearly, and use a large gasket for larger pots.

Method 2: Professional filter.

**Slightly more expensive than a spacer, but it works better. It is very permeable, and it can also block the soil of the pot from leaking out. Some are specially cut and sold, and some buy whole rolls and go back to cut them themselves.

Method 3: Tiles.

The older generation will not be as elaborate as modern young people in planting flowers, and to be honest, gaskets and mat nets are indeed many things that can be replaced. Like the bricks and tiles on the old house are curved, blocking the holes but not affecting the ventilation, it is good to find tile fragments to cushion the mat.

Method 4 Floor Consumables.

Relatively small flower pots, especially thumb pots for succulents, the bottom hole is also very small, some bottom consumables such as ceramsite, maifan stone, buy relatively large particles are completely able to block the bottom hole.

Method 5: Foam piercing.

Be sure to open the hole, the main function of the bottom hole is to facilitate water discharge, and secondly, the bottom hole is convenient for air to pass through the soil up and down convection so that the root system can fully breathe.

The bottom of the pot is cut out for ventilation. Plants should not only absorb water and inorganic salts from the soil through their roots, but also promote the growth of the aerial parts of the plant by enhancing the respiration of the roots. This requires ensuring that there is a certain amount of oxygen in the soil.

If the bottom of the pot is closed, then once there is too much watering or more rain, the pot will accumulate water, which will squeeze the air in the soil, resulting in a lack of oxygen in the soil, and the root system of the plant will suffocate and unable to breathe, resulting in rotten roots and even the death of the plant. The first choice for planting plants in pots is because the mud pots have good aeration, which is conducive to the growth of plants, and the purpose of leaving holes at the bottom of the pot is also this. In order to ensure good permeability, the bottom of many pots is not a hole, sometimes there are two, four or five holes, some pots dedicated to breeding orchids, not only have holes at the bottom, but also leave many holes around, because orchids require particularly good permeability.

Drain. Raise flowers in pots, you should water them frequently, if you don't water them, you will be "thirsty" to death, but sometimes you tend to water too much, if there are no holes under the pot, the water will not seep out in the pot, and the roots of the flowers will rot if they are soaked in water for a long time. Therefore, in order to allow the excess water to seep out of the pot in time, a hole was left at the bottom to keep the humidity of the soil suitable, and the flowers could grow "healthily".

The bottom of the pot must be open plum blossoms, the function of the hole at the bottom of the pot is to enhance the air permeability of the pot soil, the hole at the bottom of the pot can ensure that there is enough oxygen in the soil, so that the plant can breathe normally. The holes at the bottom of the pot also drain water from the soil, keeping the soil well permeable. Some plants with longer root systems can also have holes that allow the roots to grow outward, providing more space for the internal root system to grow.

The hole at the bottom of the pot must be opened, the function of the hole at the bottom of the pot is to enhance the breathability of the potting soil, the plant not only absorbs nutrients from the soil through the root system, but also needs to breathe through the roots. The holes at the bottom of the pot ensure that there is enough oxygen in the soil so that the plants can absorb enough oxygen.

The hole at the bottom of the pot also serves as drainage. When raising flowers, if too much watering can easily lead to root rot, the holes under the pot can make the excess water in the soil seep out, which can effectively avoid the situation of water accumulation in the pot soil, so that the soil can maintain a suitable humidity, so that the plant can grow healthily.

The holes at the bottom of the pot also allow the soil to remain highly permeable, allowing the roots of the plants to thrive. Under normal circumstances, there will be many small holes at the bottom of the pot to ensure that the potting soil is permeable, so that the plants can grow and develop vigorously.

The holes at the bottom of the pot also help the root system of the plant grow. Some plants have a more stretchable root system, and during the growth period, the root system will spread throughout the pot, and some of the roots can be extended outward through the holes at the bottom of the pot, thus providing more space for the internal roots to grow.

In fact, the holes under the pot are designed to allow the plant to breathe, drain water, and facilitate other maneuvering management such as repotting. So let's talk about the specific role of the hole under the flower pot, as follows:

1. Drainage. If you don't have these holes, you need to pay attention to the amount of watering when watering, and some plants still need to be watered thoroughly, which is difficult to grasp, and you may need to be in a state of worrying about the plants being watered to death by yourself all the time. And if there is a hole in the bottom of the pot, you don't have to be so careful, because if you accidentally water too much, the water will flow out of the hole at the bottom. <>

2. Breathable. Some people may not understand this point, thinking that the basin is not enough to penetrate, and what can the small holes at the bottom do. Maybe other friends think it makes sense when they hear this. Let's take an example, when it's very stuffy one day, everyone will generally open the two windows opposite the window in order for the air and phoenix to circulate in the house, or directly open the door and window, so everyone should be able to understand.

If only the basin surface is in contact with the air, it will not be able to achieve the effect of breathability, because the air is not circulated.

3. Facilitate other mobile management <>

I believe that everyone is very careful when changing pots, for fear of damaging the plants. If there is a hole in the bottom of the pot, you can use thin chopsticks to poke the soil out slightly, and then loosen the soil slightly on the front, and the plant can be safely raised.